EGP20A TSC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
/cuspopen Plastic material used carries Underwriters Laboratory Classification 94V-0 /cuspopen Glass passivated cavity-free junction /cuspopen Superfast recovery time for high efficiency /cuspopen Low forward voltage, high current capability /cuspopen Low leakage current /cuspopen High surge current capability /cuspopen High temperature metallurg ically bonded construction /cuspopen High temperature soldering guaranteed: 300℃/10 seconds, .375”(9.5mm) lead length at 5 lbs., (2.3kg) tension Mechanical Data /cuspopen Cases: JEDEC DO-15 molded plastic over glass body /cuspopen Lead: Plated axial leads, solderable per MIL-STD- 750, Method 2026 /cuspopen Polarity: Color band denotes cathode end /cuspopen Mounting position: Any /cuspopen Weight: 0.015 ounce, 0.4 gram DO-15 Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol EGP 20A EGP 20B EGP 20D EGP 20F EGP 20G EGP 20J EGP 20K Units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 300 400 600 800 V Maximum RMS Voltage VRMS 35 70 140 210 280 420 560 V Maximum DC Blocking Voltage VDC 50 100 200 300 400 600 800 V Maximum Average Forward Rectified Current .375”(9.5mm) Lead Length @ TA = 55℃ I(AV) 2.0 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) IFSM 75.0 A Maximum Instantaneous Forward Voltage @ 2.0A VF 0.95 1.25 1.7 V Maximum DC Reverse Current @ TA=25℃ at Rated DC Blocking Voltage @ TA=125℃ IR 5.0 100 uA uA Maximum Reverse Recovery Time ( Note 1 ) Trr 50 75 nS Typical Junction Capacitance ( Note 2 ) Cj 40 35 pF Typical Thermal Resistance (Note 3) RθJA RθJL 20 ℃/W Operating and Storage Temperature Range TJ ,TSTG -65 to + 150 ℃ Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1.0 MHz and Applied VR=4.0 Volts 3. Mount on Cu-Pad Size 10mm x 10mm on P.C.B.
- 589 - FIG.1- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50/c87 NONINDUCTIVE /c49/c87 NON INDUCTIVE OSCILLOSCOPE (NOTE 1) PULSE GENERATOR (NOTE 2) DUT (+) 50Vdc (approx) (-) NOTES: 1. Rise Time=7ns max. Input Impedance= 1 megohm 22pf 2. Rise Time=10ns max. Sourse Impedance= 50 ohms (-) (+) 10/c87 NONINDUCTIVE -1.0A -0.25A +0.5A trr 1cm SET TIME BASE FOR 5/ 10ns/ cm RATINGS AND CHARACTERISTIC CURVES (EGP20A THRU EGP20K) FIG.5- TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT .( A ) 0 20 40 60 80 100 120 140 100 0.1 0.01 0.001 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) Tj=25 C0 Tj=75 C0 Tj=125 C0 Tj=150 C0 FIG.3- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FOR WARD SURGE CURRENT . (A) 1 10 100 NUMBER OF CYCLES AT 60Hz Tj=Tj max. 8.3ms Single Half Sine Wave JEDEC Method FIG.6- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS FOR WARD CURRENT . (A) FORWARD VOLTAGE. (V) Tj=25 C0 Tj=150 C0 0.01 0.1 PULSE WIDTH-300 S 1% DUTY CYCLE EGP20A-EGP20D EGP20F EGP20K FIG.4- TYPICAL JUNCTION CAPACITANCE JUNCTION CAP ACITANCE.(pF) 10.1 10 1000100 100 120 140 REVERSE VOLTAGE. (V) Tj=25 C f=1.0MHz Vsig=50mVp-p EGP20A-EGP20D EGP20F-EGP20K FIG.2- MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FOR WARD CURRENT . (A) 250 50 75 125 175 150100 1.0 2.0 3.0 AMBIENT TEMPERATURE. ( C) o RESISTIVE OR INDUCTIVE LOAD 0.375" (9.5mm) LEAD LENGTH