EGP20A ONSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 5
Technical content
Features
Glass−Passivated Cavity−Free Junction High Surge Current Capability Low Leakage Current Super−Fast Recovery Time for High Efficiency Low Forward V oltage, High Current Capability ABSOLUTE MAXIMUM RATINGS (TA = 25C unless otherwise noted) Symbol Parameter Value Unit IF(AV) Average Rectified Current 0.375 inch lead length at TA = 55C 2.0 A IFSM Peak Forward Surge Current 8.3 ms single half−sine−wave Superimposed on rated load (JEDEC method) 75 A TJ, TSTG Junction and Storage Temperature Range −65 to 150 C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. THERMAL CHARACTERISTICS Symbol Parameter Value Unit PD Total Device Dissipation 3.13 W Derate above 25C 25 mWC R/C0113JA Thermal Resistance, Junction to Ambient 40 C/W R/C0113JL Thermal Resistance, Junction to Lead 15 C/W ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Parameter Device Unit20A 20B 20C 20D 20F 20G 20J 20K Peak Repetitive Reverse Voltage 50 100 150 200 300 400 600 800 V Maximum RMS Voltage 35 70 105 140 210 280 420 560 V DC Reverse Voltage (Rated VR) 50 100 150 200 300 400 600 800 V Maximum Reverse Current at Rated VR TA = 25/C0095C 5.0 /C0109A TA = 125/C0095C 100 /C0109A Maximum Reverse Recovery Time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A 50 75 nS Maximum Forward Voltage @ 2.0 A 0.95 1.25 1.7 V Typical Junction Capacitance V R = 4.0 V, f = 1.0 MHz 70 45 pF Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. *Pulse Test: Pulse Width 300 /C0109s, Duty Cycle 2%. EGP20X = Specific Device Code X = A/B/C/D/F/G/J/K Z = Assembly Code YWW = Date Code (Year & Week) MARKING DIAGRAM EGP20X ZYWW AXIAL LEAD DO 204 CASE 017AJ See detailed ordering and shipping information on page 3 of this data sheet.
ORDERING INFORMATION
EGP20A − EGP20K www.onsemi.com Reverse Recovery Time Characteristic and Test Circuit Diagram Figure 6. Test Circuit Diagram Figure 7. Reverse Recovery Time
- Rise time = 7.0 ns max; Input impedance = 1.0 M /C0087 22 pF.
- Rise time = 10 ns max; Source impedance = 50 /C0087.
Device Package Shipping† EGP20A Axial Lead / DO−204 (Pb−Free) 4000 / Tape & Reel EGP20B EGP20C EGP20D EGP20F EGP20G EGP20J EGP20K †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.
98AON13437GDOCUMENT NUMBER: DESCRIPTION: Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1AXIAL LEAD DO 204 onsemi and are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2016 www.onsemi.com
onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. ADDITIONAL INFORMATION TECHNICAL PUBLICATIONS: Technical Library: www.onsemi.com/design/resources/technical−documentation onsemi Website: www.onsemi.com ONLINE SUPPORT: www.onsemi.com/support For additional information, please contact your local Sales Representative at www.onsemi.com/support/sales