DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Aluminum Electrolytic Capacitors/ HD – EEE-104 – 0D±0.5 F±0.5 Sleeve 14 min. 3 min.L= = L 16 : L±1.5 L 20 : L±2.0 Pressure relief 06.3 010 0D±0.5 fd±0.05 ■ Features

  • Endurance : 105 °C 1000 h to 2000 h
  • Minaturize, Higher Capacitance :

1 Size Miniturized Product of Current A-NHG

  • RoHS directive compliant Radial Lead Type Series: HD Type: A ■ Specifi cations Category Temp. Range –55 °C to +105 °C Rated W.V. Range 10 V.DC to 50 V.DC Nominal Cap. Range 2.2 μF to 22000 μF Capacitance Tolerance ±20 % (120 Hz/+20 °C) DC Leakage Cur rent I < 0.01 CV or 3 (μA) After 2 minutes (Which is greater) tan d Please see the attached standard products list Endurance After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage), When the capacitors are restored to 20 °C, the capacitors shall meet the limits specifi ed below. Duration : 05 to 08=1000 hours, 010 to 018=2000 hours Capacitance change ±20 % of initial measured value tan d < 200 % of initial specifi ed value DC leakage current < initial specifi ed value Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)■ Di men sions in mm (not to scale) ■ Frequency correction factor for ripple current Body Dia. 0D 5 6.3 8 10 12.5 16 18 W.V.(V.DC) Cap. (μF) Frequency (Hz) 60 120 1 k 10 k 100 k 10 to 50 (Unit : mm) 02 May. 2014

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Aluminum Electrolytic Capacitors/ HD – EEE-105 – ■ Standard Prod ucts

  • When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
  • Please refer to the page of “Taping Dimensions”. W.V. Cap. (±20 %) Case size Specifi cation Lead Length Part No. Min. Packaging Q'ty Dia. Length Ripple Current (120 Hz) (+105 °C) tan d (120 Hz) (+20 °C) Endur- ance Lead Dia. Lead Space Straight Leads TapingStraight Taping Taping (V) (μF) (mm) (mm) (mA r.m.s.) (hours) (mm) (mm) (mm) (mm) (pcs) (pcs) 2200 10 16 760 0.26 2000 0.6 5.0 5.0 EEUHD1A222( ) 200 500 10000 16 25 1890 0.42 2000 0.8 7 .5 7 .5 EEUHD1A103( ) 100 250 15000 16 31.5 2180 0.52 2000 0.8 7 .5 EEUHD1A153 100 22000 18 35.5 2400 0.66 2000 0.8 7 .5 EEUHD1A223 50 6800 16 25 1780 0.30 2000 0.8 7 .5 7 .5 EEUHD1C682( ) 100 250 8200 16 25 1780 0.34 2000 0.8 7 .5 7 .5 EEUHD1C822( ) 100 250 10000 16 31.5 2060 0.38 2000 0.8 7 .5 EEUHD1C103 100 15000 18 35.5 2210 0.48 2000 0.8 7 .5 EEUHD1C153 50 1000 10 16 680 0. 16 2000 0.6 5.0 5.0 EEUHD1E102( ) 200 500 4700 16 25 1750 0.22 2000 0.8 7 .5 7 .5 EEUHD1E472( ) 100 250 5600 16 25 1750 0.24 2000 0.8 7 .5 7 .5 EEUHD1E562( ) 100 250 6800 16 31.5 2040 0.26 2000 0.8 7 .5 EEUHD1E682 100 10000 18 35.5 2200 0.34 2000 0.8 7 .5 EEUHD1E103 50 470 10 16 460 0.14 2000 0.6 5.0 5.0 EEUHD1V471( ) 200 500 680 10 16 460 0.14 2000 0.6 5.0 5.0 EEUHD1V681( ) 200 500 3300 16 25 1610 0. 18 2000 0.8 7 .5 7 .5 EEUHD1V332( ) 100 250 4700 16 31.5 1910 0.20 2000 0.8 7 .5 EEUHD1V472 100 6800 18 35.5 2050 0.24 2000 0.8 7 .5 EEUHD1V682 50 Endurance : 105 °C 05 to 08=1000 h, 010 to 018=2000 h 02 May. 2014

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Aluminum Electrolytic Capacitors/ HD – EEE-106 – ■ Standard Prod ucts

  • When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
  • Please refer to the page of “Taping Dimensions”. ✽✽✽ Please kindly accept last shipment : 31/Mar/2015 W.V. Cap. (±20 %) Case size Specifi cation Lead Length Part No. Min. Packaging Q'ty Dia. Length Ripple Current (120 Hz) (+105 °C) tan d (120 Hz) (+20 °C) Endur- ance Lead Dia. Lead Space Straight Leads TapingStraight Taping Taping (V) (μF) (mm) (mm) (mA r.m.s.) (hours) (mm) (mm) (mm) (mm) (pcs) (pcs) 330 10 16 410 0.12 2000 0.6 5.0 5.0 EEUHD1H331( ) 200 500 470 10 20 530 0.12 2000 0.6 5.0 5.0 EEUHD1H471( ) 200 500 560 16 15 650 0.12 2000 0.8 7.5 7.5 EEUHD1H561S( ) 100 250 680 16 15 650 0.12 2000 0.8 7.5 7.5 EEUHD1H681S( ) 100 250 2200 16 31.5 1470 0. 14 2000 0.8 7 .5 EEUHD1H222 100 3300 18 35.5 1770 0. 16 2000 0.8 7 .5 EEUHD1H332 50 Endurance : 105 °C 05 to 08=1000 h, 010 to 018=2000 h 02 May. 2014