EEU-FR1V821L

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Aluminum Electrolytic Capacitors/ FR – EEE-82 – 010 Sleeve 14 min. 3 min.L= 16 : L±1.5 L 20 : L±2.0 Pressure relief 06.3 0D±0.5 F±0.5 0D±0.5 fd±0.05 ■ Country of origin Malaysia Radial Lead Type Series: FR Type: A ■ Specifi cations Category Temp. Range –40 °C to +105 °C Nominal Cap. Range 4.7 μF to 8200 μF Capacitance Tolerance ±20 % (120 Hz/+20 °C) DC Leakage Cur rent I < 0.01 CV (μA) After 2 minutes tan d A d d 0 . 02 p e r 1 000 μF f or p r o d u c t s o f 1 000 μF or mor e . Endurance After following life test with DC voltage and +105 °C±2 °C ripple current value applied. (The sum of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors are restored to 20 °C, the capacitors shall meet the limits specifi ed below. Duration 05×11/ 06.3×11.2 : 5000 hours 08×11.5/ 010×12.5 : 6000 hours (✽ Only EEUFR1V331U (010×12.5) 5000 hours) 08×15/ 010×16 : 8000 hours, 08×20 : 9000 hours 010×20 to 010×25/ 012.5×20 to 012.5×35/ 016×20 to 016×25 : 10000 hours Capacitance change ±25 % of initial measured value (6.3 V to 10 V : ±30 %) tan d < 200 % of initial specifi ed value DC leakage current < initial specifi ed value Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment) ■ Di men sions in mm (not to scale) W.V.(V.DC) Cap (μF) Frequency (Hz) 60 120 1 k 10 k 100 k 6.3 to 63 ■ Frequency correction factor for ripple current Body Dia. 0D56 . 38 1 0 1 2 . 5 1 6 B o d y L e n g t h L ———— 1 2 . 5 t o 2 5 3 0 t o 3 5 — ■ Features

• Low ESR (Same as FM Series)
• Endurance : 5000 h to 10000 h at + 105 °C
• RoHS directive compliant ■ Attention Not applicable for automotive (Unit : mm) 05 May. 2014

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Aluminum Electrolytic Capacitors/ FR – EEE-83 – ■ Case size/Impedance/Ripple current W.V.(V.DC) 6.3 V to 35 V 50 V Case size (0D×L) Imped ance (Ω/100 kHz) Ripple Current (mA r.m.s./100 kHz ) Imped ance (Ω/100 kHz) Ripple Current (mA r.m.s./100 kHz) 5 × 11 0.300 1.000 280 0.340 1.130 250 8 × 15 0.041 0.123 1240 0.045 0.135 1140 8 × 20 0.030 0.090 1560 0.033 0.099 1430 10 × 16 0.028 0.078 1790 0.030 0.090 1650 10 × 20 0.020 0.057 2180 0.023 0.069 1890 10 × 25 0.018 0.054 2470 0.022 0.066 2150 16 × 20 0.017 0.043 3300 0.019 0.048 2870 16 × 25 0.014 0.035 3820 0.016 0.040 3320 W.V.(V.DC) 63 V Case size (0D×L) Imped ance (Ω/100 kHz) Ripple Current (mA r.m.s./100 kHz) 5 × 11 0.510 2.040 175 6.3 × 11.2 0.210 0.840 284 8 × 11.5 0.092 0.368 566 8 × 15 0.068 0.272 741 8 × 20 0.050 0.200 930 10 × 12.5 0.063 0.252 761 10 × 16 0.045 0.180 1073 10 × 20 0.035 0.140 1229 10 × 25 0.033 0.132 1500 12.5 × 20 0.033 0.125 1582 12.5 × 25 0.027 0.092 1995 12.5 × 30 0.024 0.082 2528 12.5 × 35 0.021 0.071 2780 16 × 20 0.029 0.093 2153 16 × 25 0.024 0.074 2988 05 May. 2014

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Aluminum Electrolytic Capacitors/ FR – EEE-84 – ■ Standard Prod ucts W.V. Cap. (±20 %) Case size Specifi cation Lead Length Part No. Min. Packaging Q'ty Dia. Length Ripple Current (100 kHz) (+105 °C) Imped- ance (100 kHz) (+20 °C) Endur- ance Lead Dia. Lead Space Straight Leads TapingStraight Taping Taping (V) (μF) (mm) (mm) (mA r.m.s.) (Ω) (hours) (mm) (mm) (mm) (mm) (pcs) (pcs) 6.3 1200 8 15 1240 0.041 8000 0.6 3.5 5.0 EEUFR0J122L( ) 200 1000 1500 8 20 1560 0.030 9000 0.6 3.5 5.0 EEUFR0J152L( ) 200 1000 1800 10 16 1790 0.028 8000 0.6 5.0 5.0 EEUFR0J182( ) 200 500 2200 10 20 2180 0.020 10000 0.6 5.0 5.0 EEUFR0J222( ) 200 500 2700 10 25 2470 0.018 10000 0.6 5.0 5.0 EEUFR0J272L( ) 200 500 3300 10 25 2470 0.018 10000 0.6 5.0 5.0 EEUFR0J332L( ) 200 500 5600 12.5 30 3630 0.013 10000 0.8 5.0 EEUFR0J562L 100 6800 12.5 35 3750 0.012 10000 0.8 5.0 EEUFR0J682L 100 16 20 3300 0.017 10000 0.8 7 .5 7 .5 EEUFR0J682S( ) 100 250 8200 16 25 3820 0.014 10000 0.8 7 .5 7 .5 EEUFR0J822( ) 100 250 1000 10 16 1790 0.028 8000 0.6 5.0 5.0 EEUFR1A102( ) 200 500 8 15 1240 0.041 8000 0.6 3.5 5.0 EEUFR1A102L( ) 200 1000 1500 8 20 1560 0.030 9000 0.6 3.5 5.0 EEUFR1A152L( ) 200 1000 10 16 1790 0.028 8000 0.6 5.0 5.0 EEUFR1A152( ) 200 500 1800 10 20 2180 0.020 10000 0.6 5.0 5.0 EEUFR1A182( ) 200 500 2200 10 25 2470 0.018 10000 0.6 5.0 5.0 EEUFR1A222L( ) 200 500 4700 12.5 30 3630 0.013 10000 0.8 5.0 EEUFR1A472L 100 16 20 3300 0.017 10000 0.8 7 .5 7 .5 EEUFR1A472S( ) 100 250 5600 12.5 35 3750 0.012 10000 0.8 5.0 EEUFR1A562L 100 6800 12.5 35 3750 0.012 10000 0.8 5.0 EEUFR1A682L 100 16 25 3820 0.014 10000 0.8 7 .5 7 .5 EEUFR1A682( ) 100 250

• When requesting taped product, please put the letter "B" or "H" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
• Please refer to the page of “Taping Dimensions”. 05 May. 2014

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Aluminum Electrolytic Capacitors/ FR – EEE-85 – ■ Standard Prod ucts W.V. Cap. (±20 %) Case size Specifi cation Lead Length Part No. Min. Packaging Q'ty Dia. Length Ripple Current (100 kHz) (+105 °C) Imped- ance (100 kHz) (+20 °C) Endur- ance Lead Dia. Lead Space Straight Leads TapingStraight Taping Taping (V) (μF) (mm) (mm) (mA r.m.s.) (Ω) (hours) (mm) (mm) (mm) (mm) (pcs) (pcs) 680 8 15 1240 0.041 8000 0.6 3.5 5.0 EEUFR1C681L( ) 200 1000 1000 8 20 1560 0.030 9000 0.6 3.5 5.0 EEUFR1C102L( ) 200 1000 10 16 1790 0.028 8000 0.6 5.0 5.0 EEUFR1C102( ) 200 500 1500 10 20 2180 0.020 10000 0.6 5.0 5.0 EEUFR1C152( ) 200 500 10 25 2470 0.018 10000 0.6 5.0 5.0 EEUFR1C152L( ) 200 500 1800 10 25 2470 0.018 10000 0.6 5.0 5.0 EEUFR1C182L( ) 200 500 3300 12.5 30 3630 0.013 10000 0.8 5.0 EEUFR1C332L 100 16 20 3300 0.017 10000 0.8 7 .5 7 .5 EEUFR1C332S( ) 100 250 3900 12.5 35 3750 0.012 10000 0.8 5.0 EEUFR1C392L 100 16 20 3300 0.017 10000 0.8 7 .5 7 .5 EEUFR1C392S( ) 100 250 4700 12.5 35 3750 0.012 10000 0.8 5.0 EEUFR1C472L 100 16 25 3820 0.014 10000 0.8 7 .5 7 .5 EEUFR1C472( ) 100 250 5600 16 25 3820 0.014 10000 0.8 7 .5 7 .5 EEUFR1C562( ) 100 250 390 8 15 1240 0.041 8000 0.6 3.5 5.0 EEUFR1E391L( ) 200 1000 470 8 15 1240 0.041 8000 0.6 3.5 5.0 EEUFR1E471Y( ) 200 1000 8 20 1560 0.030 9000 0.6 3.5 5.0 EEUFR1E471L( ) 200 1000 560 8 20 1560 0.030 9000 0.6 3.5 5.0 EEUFR1E561L( ) 200 1000 680 8 20 1560 0.030 9000 0.6 3.5 5.0 EEUFR1E681L( ) 200 1000 10 16 1790 0.028 8000 0.6 5.0 5.0 EEUFR1E681( ) 200 500 820 10 20 2180 0.020 10000 0.6 5.0 5.0 EEUFR1E821( ) 200 500 1000 10 20 2180 0.020 10000 0.6 5.0 5.0 EEUFR1E102( ) 200 500 10 25 2470 0.018 10000 0.6 5.0 5.0 EEUFR1E102L( ) 200 500 1200 10 25 2470 0.018 10000 0.6 5.0 5.0 EEUFR1E122L( ) 200 500 16 20 3300 0.017 10000 0.8 7 .5 7 .5 EEUFR1E182S( ) 100 250 2200 12.5 30 3630 0.013 10000 0.8 5.0 EEUFR1E222L 100 16 20 3300 0.017 10000 0.8 7 .5 7 .5 EEUFR1E222S( ) 100 250 2700 12.5 35 3750 0.012 10000 0.8 5.0 EEUFR1E272L 100 16 20 3300 0.017 10000 0.8 7 .5 7 .5 EEUFR1E272S( ) 100 250 3300 16 25 3820 0.014 10000 0.8 7 .5 7 .5 EEUFR1E332( ) 100 250

• When requesting taped product, please put the letter "B" or "H" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
• Please refer to the page of “Taping Dimensions”. 05 May. 2014

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Aluminum Electrolytic Capacitors/ FR – EEE-86 – ■ Standard Prod ucts W.V. Cap. (±20 %) Case size Specifi cation Lead Length Part No. Min. Packaging Q'ty Dia. Length Ripple Current (100 kHz) (+105 °C) Imped- ance (100 kHz) (+20 °C) Endur- ance Lead Dia. Lead Space Straight Leads TapingStraight Taping Taping (V) (μF) (mm) (mm) (mA r.m.s.) (Ω) (hours) (mm) (mm) (mm) (mm) (pcs) (pcs) 270 8 15 1240 0.041 8000 0.6 3.5 5.0 EEUFR1V271L( ) 200 1000 390 8 20 1560 0.030 9000 0.6 3.5 5.0 EEUFR1V391L( ) 200 1000 470 8 20 1560 0.030 9000 0.6 3.5 5.0 EEUFR1V471L( ) 200 1000 10 16 1790 0.028 8000 0.6 5.0 5.0 EEUFR1V471( ) 200 500 560 10 20 2180 0.020 10000 0.6 5.0 5.0 EEUFR1V561( ) 200 500 680 10 20 2180 0.020 10000 0.6 5.0 5.0 EEUFR1V681( ) 200 500 10 25 2470 0.018 10000 0.6 5.0 5.0 EEUFR1V681L( ) 200 500 820 10 25 2470 0.018 10000 0.6 5.0 5.0 EEUFR1V821L( ) 200 500 1500 12.5 30 3630 0.013 10000 0.8 5.0 EEUFR1V152L 100 16 20 3300 0.017 10000 0.8 7 .5 7 .5 EEUFR1V152S( ) 100 250 1800 12.5 35 3750 0.012 10000 0.8 5.0 EEUFR1V182L 100 16 25 3820 0.014 10000 0.8 7 .5 7 .5 EEUFR1V182( ) 100 250 2200 12.5 35 3750 0.012 10000 0.8 5.0 EEUFR1V222L 100 16 25 3820 0.014 10000 0.8 7 .5 7 .5 EEUFR1V222( ) 100 250 120 8 15 1140 0.045 8000 0.6 3.5 5.0 EEUFR1H121L( ) 200 1000 180 8 20 1430 0.033 9000 0.6 3.5 5.0 EEUFR1H181L( ) 200 1000 220 10 16 1650 0.030 8000 0.6 5.0 5.0 EEUFR1H221( ) 200 500 270 10 20 1890 0.023 10000 0.6 5.0 5.0 EEUFR1H271( ) 200 500 330 10 25 2150 0.022 10000 0.6 5.0 5.0 EEUFR1H331L( ) 200 500 680 12.5 30 3160 0.016 10000 0.8 5.0 EEUFR1H681L 100 820 12.5 35 3270 0.014 10000 0.8 5.0 EEUFR1H821L 100 16 20 2870 0.019 10000 0.8 7 .5 7 .5 EEUFR1H821S( ) 100 250 1000 16 25 3320 0.016 10000 0.8 7 .5 7 .5 EEUFR1H102( ) 100 250 100 8 15 741 0.068 8000 0.6 3.5 5.0 EEUFR1J101L( ) 200 1000 120 8 20 930 0.050 9000 0.6 3.5 5.0 EEUFR1J121L( ) 200 1000 10 16 1073 0.045 8000 0.6 5.0 5.0 EEUFR1J121( ) 200 500 150 8 20 930 0.050 9000 0.6 3.5 5.0 EEUFR1J151L( ) 200 1000 10 16 1073 0.045 8000 0.6 5.0 5.0 EEUFR1J151( ) 200 500 180 10 20 1229 0.035 10000 0.6 5.0 5.0 EEUFR1J181( ) 200 500 220 10 25 1500 0.033 10000 0.6 5.0 5.0 EEUFR1J221L( ) 200 500 270 10 20 1229 0.035 10000 0.6 5.0 5.0 EEUFR1J271U( ) 200 500 10 25 1500 0.033 10000 0.6 5.0 5.0 EEUFR1J271L( ) 200 500 560 12.5 30 2528 0.024 10000 0.8 5.0 EEUFR1J561L 100 16 20 2153 0.029 10000 0.8 7 .5 7 .5 EEUFR1J561S( ) 100 250 680 12.5 35 2780 0.021 10000 0.8 5.0 EEUFR1J681L 100 820 16 25 2988 0.024 10000 0.8 7 .5 7 .5 EEUFR1J821( ) 100 250

• When requesting taped product, please put the letter "B" or "H" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
• Please refer to the page of “Taping Dimensions”. 05 May. 2014