ECVQ-EK3 SGX | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Whilst SGX has taken care to ensure the accuracy of the information conta ined herein it accepts no responsibility for the consequences of any use thereof and also reserves the right to change the specification of goods without notice. SGX accepts no liability beyond the set out in its st andard conditions of sale in respect of infringement of third party patents arising from the use of SGX products in accordance with information contained herein. In case of modification of the product, SGX disclaims all liability. SGX Europe sp .z o.o. Poland REGON: 362332227 DS-0238, Issue 1, 10-May-2016, Page 1 SGX Europe Sp. z o.o. Building 11 Ligocka St. 103, 40-568 Katowice, Poland T: +48 (0) 32 438 4778 E: sales.is@sgxsensortech.com www.sgxsensortech.com ECVQ-EK3 Datasheet Electrochemical and Pellistor Gas Sensor Evaluation Kit Get started quickly in gas sensor instrument design using pellistor and electrochemical gas sensors from SGX. Simply attach the universal power supply, connect to a PC USB port and plug in an SGX pellistor or electrochemical gas sensor. The SGX data lo gging and control software allows the performance of electrochemical and pellistor gas sensors to be assessed and makes it easy to capture performance data. Users can experiment with different settings before designing their own instrument. Circuit diagram and parts list supplied. INTRODUCTION The SGX ECVQ-EK3 Gas Sensor Evaluation Kit will drive the SGX range of electrochemical and pellistor (including thermal conductivity) gas sensors, automatically measure the sensor outputs and calculate gas concentration levels. Sensors can be monitored automatically via the USB interface with an easy -to-use control and data logging PC application provided on CD. Alternatively a terminal program such as HyperTerminal can be used to send simple commands to the on -board microcontroller. The user manual provides a comprehensive set of commands. The PCB provides sockets for use with SGX electrochemical and pellistor gas sensors. Electrochemical devices and VQ500 series pellistor heads can be plugged directly onto the PCB. Terminal blocks are also provided for individual pellistor devices or for connecting to VQ600 series pellistor head cables. A temperature sensing IC is provided on the PCB close to the sensor socket positions. For electrochemical sensors the bias voltage c an be adjusted or set to zero and the output is given in nA or mA. For pellistor devices the bridge voltage can be adjusted and the bridge output is given in mV. In both cases, where the sensor has a linear response to concentration, a basic calibration can be performed using the supplied software to give a concentration reading in ppm, %volume or %LEL (Lower Explosive Limit). An expansion connector provides access to four configurable alarms (open collector), two analog outputs and four digital inputs. LED s on the board mimic the status of each alarm. A JTAG header allows advanced users to upload their own software to the microcontroller (MSP430F2616) and make full use of the available interfaces. A universal mains adapter is also supplied or the user may connect a 9 V power supply to the terminal block connector. Gas sensors to be ordered separately
FEATURES
For use with SGX electrochemical gas sensors For use with SGX pellistor/thermal conductivity gas sensors: Individual bead pairs VQ500 series heads VQ600 series heads Simple control and set-up of sensors USB interface to a Personal Computer (PC) Free PC application software for easy control and data logging Adjustable pellistor bridge voltage (1.6 V to 4.6 V) Adjustable electrochemical bias voltage (-700mV to +350mV) 16-bit Analog to Digital Conversion (ADC) for sensor outputs Calibrate sensors with linear response and monitor gas concentration levels PCB mounted temperature sensor IC Four configurable alarm outputs Two configurable analog outputs (12-bit DAC) Four digital inputs Expansion header for additional applications JTAG header for user software upload Supplied with universal mains adapter Supplied with user manual on CD Gas flow hoods available separately Note: The ECVQ-EK3 cannot be used with SGX-4OX, SGX-7OX & SGX-4DT sensors.
© SGX Sensortech 2016 Document subject to disclaimer on page 1 DS-0238, Issue 1, 10-May-2016, Page 2 ELECTRICAL DATA Universal Mains Adapter Input Voltage 90 - 264 V ac Input Frequency 50 – 60 Hz Adapters supplied UK, Europe, USA, Australia. Output 9 V dc PCB Interfaces DC Supply Input SK4 2.1 x 5.5 mm Socket, centre positive TB1 Terminal Block Input Voltage 9 V 10% Input Protection Over voltage & current, Reverse voltage Gas Sensor Sockets S1 VQ500 Series Pellistor S2 Electrochemical Sensor TB2 VQ600 or individual compensator TB3 VQ600 or individual pellistor Expansion Connector PL2 2 x 10-pin 0.1” PCB Header 3V3 Regulated 1 2 9 V Unregulated
0 V 3 4 0 V
Input 1 (3V3 logic) 5 6 Output 1 (Open collector) Input 2 (3V3 logic) 7 8 Output 2 (Open collector) Input 3 (3V3 logic) 9 10 Output 3 (Open collector) Input 4 (3V3 logic) 11 12 Output 4 (Open collector) 0 V 13 14 Analog Out 1 (0 - 2.048 V) 0 V 15 16 Analog Out 2 (0 - 2.048 V) Spare RXD (3V3) 17 18 Spare TXD (3V3)
0 V 19 20 Spare
PL1 2 x 7-pin 0.1” Box Header TDO 1 2 VCCO TDI 3 4 VCCI TMS 5 6 Unused TCK 7 8 Unused
0 V 9 10 Unused
D1 – D4 Green LEDs (ON = Alarm asserted) D5 Green LED (Flash = PCB functional) User Adjustments VR1 Pellistor bridge voltage (1.6 to 4.6V) VR2 Electrochemical bias voltage (-700mV to +350mV) LK1 1-2 (unbiased); 1-3 (biased) USB SK5 Mini-USB type B MECHANICAL DATA Dimensions Mains Adapter 72 x 45 x 29 mm Evaluation Kit PCB 130 x 55 mm ENVIRONMENTAL DATA Operating Temperature Range Mains Adapter Operating temp: 0 C to +40 C Storage temp: -25 C to +85 C Operating humidity: 10 to 90% PCBs Operation and storage from -30 C to +75 C Sensors See individual sensor data sheets PERFORMANCE DATA ADC Resolution 16-Bit DAC Resolution 12-Bit Pellistor bridge voltage 1.6 to 4.6V (adjustable) Electrochemical bias -700mV to +350mV (adjustable) ADC Resolution (Pel) <0.1mV ADC Resolution (Elect.) 5nA (low range, +/-164uA) 25nA (high range, +/-819uA) Temperature sensor IC accuracy 2 C (at 25 C) RECOMMENDED PC SYSTEM For Control and Data logging Software: Processor Pentium 4/M or equivalent Operating System Windows XP, Vista or 7 Screen resolution 1024 x 768 Pixels RAM 1 GB Disk Space 1.6 GB
ORDERING INFORMATION
ECVQ-EK3 – Electrochemical/Pellistor Gas Sensor Evaluation Kit containing: Evaluation PCB Universal Mains Adapter & USB lead Data Logging Software and User Guide on CD 4-Series to 7-Series Electrochemical Sensor Adapter ACCESSORIES (Order separately if required) JAS767906AA – Standard Gas Flow Hood for VQ500 series, Infrared mini-sensors and electrochemical (non-reactive gas) sensors JAS769638AA – Premium Gas Flow Hood recommended for reactive gases e.g. H2S, NO2, Cl2, ClO2, ETO Notes: Gas Sensors should also be ordered separately. The ECVQ-EK3 cannot be used with SGX-4OX, SGX-7OX & SGX-4DT sensors.