ECU-P1300 ADVANTECH | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Features
Designed for Smart-Grid Applications ECU-P1706 focuses on the Vibration/ Substation Signal Analytics (Wind-Power / Smart Substations) ECU-P1702 focuses on the Partial Discharge Detection and Analytical Devices (Smart Substations) ECU-P1300 focuses on Vibration Applications (Wind-power / Smart Substations) Easy to install to ECU-1871 Energy Controller ECU-P1706 ECU-P1702 ECU-P1300
250 KS/s, 16bit, Simultaneous 8-ch Analog
10 MS/s, 12bit, Simultaneous 4-ch Analog
Vibration Signal Modulate Card NEW Specifications General Power Consumption Typical: 5V @ 850mA Bus Type PCI-104 I/O Connector Plug-in Terminal Block Operating -20 ~ 70°C (-4 ~158°F) Temperature @ 5 ~ 85% RH Storage Temperature -40 ~ 80°C (-40 ~176°F) Storage Humidity 5 ~ 95% RH, non-condensing (IEC 60068-2-3) Analog Input Channels 8 differential Resolution 16 bits Max. Sampling Rate 250 KS/s FIFO Size 8K samples Overvoltage ±30V Protection Input Impedance 18MΩ Sampling Mode Software, onboard programmable pacer and external (TTL Level) Trigger mode Delay To Start Trigger, Delay To Stop Trigger Trigger Source Analog Trigger, External Trigger Input Range (V. Software Programmable) Bipolar ±10V ±5V ±2.5V ±1.25V Accuracy % of FSR±1LSB 0.04 0.04 0.06 0.08 Timer Counter Channels 2 Resolution 32 bits Mode In: Event counting, Frequency In, PWM In Compatibility Isolated 24VDC Max. Input Frequency 1 MHz Max. Output Frequency 1 MHz
Ordering Information
ECU-P1706-AE 250 KS/s, 16bit, Simultaneous 8-ch PCI-104 Specifications General Power Consumption 5V @ 700mA (Max.) 3.3V @ 850mA (Max.) Bus Type PCI-104 I/O Connector BNC Operating -20 ~ 70°C (-4 ~158°F) Temperature @ 5 ~ 85% RH Storage Temperature -40 ~ 80°C (-40 ~176°F) Storage Humidity 5 ~ 95% RH, non-condensing (IEC 60068-2-3) Analog Input Channels 4 Single-ended Resolution 12 bits Max. Sampling Rate 10 MS/s FIFO Size 32K samples Overvoltage ±15V Protection Input Impedance 50 ohm/1M ohm/Hi Z switch selectable Sampling Mode Software, onboard programmable pacer and external (TTL Level) Trigger mode Delay To Start Trigger, Delay To Stop Trigger Trigger Source Analog Trigger, External Trigger Input Range ±5V, ±2.5V, ±1V, ±0.5V ECU-P1702-LAE 10 MS/s, 12bit, Simultaneous 4-ch PCI-104 Specifications General Power Consumption Typical: 5V @ 700mA; 12V @ 100mA Operating -20 ~ 70°C (-4 ~158°F) Temperature @ 5 ~ 85% RH Storage Temperature -40 ~ 80°C (-40 ~176°F) Storage Humidity 5 ~ 95% RH, non-condensing (IEC 60068-2-3) Vibration Modulate Channels 8 Input Range ±5V (Max.) Output Range ±10V Input Coupling AC Sensor Current 4mA ±1%, 24V compliant Supply Precision 0.1% Drive Ability 0 ~ 5K Sensor Signal Gain 1 Signal Gain 1 Analog Filter 8th order Lowpass Bessel Filters Filter Adjustable 0.1 Hz ~ 25KHz Adjustable by Software Program ECU-P1300-AE Vibration Signal Modulate Card ECU-P1706 ECU-P1300ECU-P1702 All product specifications are subject to change without notice Last updated : 5-May-2015