ECP200 EIC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
EiC Corp. A Subsidiary of EiC Enterprises, Ltd. 45738 Northport Loop West, Fremont, CA 94538 Phone: (510) 979-8999 Fax: (510) 979-8902 www.eiccorp.com 1 Revision A SS-000536-000 ECP200
2.0 WATT POWER AMPLIFIER
Test Conditions: Ta = 25 o C, VCC = +5 V Icq = 800 mA (class A operation) 1800 - 2300MHz 33 dBm P1dB High Linearity: 49 dBm OIP3 High Efficiency: PAE > 50% 11 dB Linear Gain Single 5V Supply High Reliabilty Class A or AB operation Product Features Applications Product Description The ECP200 is a single stage, 2.0W power amplifier that offers excellent linearity and efficiency. This device was developed using EiC’s proprietary InGaP Heterojunction Bipolar Transistor (HBT) process. The devices have a 50 Ohms input impedance and pre-matched output. It is optimized for multicarriers applications and allows customers to use class A or class AB operations. The devices can be easily matched in output side to obtain the optimum power, linearity and efficiency. The product is targeted for use as driver amplifier for wireless infrastructure applications. It is available in two surface-mount plastic packages: QFN-16 (4x4mm) and SOIC-8. CAUTION! SENSITIVE ELECTRONIC DEVICE Basestations and Repeaters CDMA/GSM/TDMA/EDGE PCS/CDMA2000/IMT2000/UMTS Multi-carrier systems Packages Available QFN-16 (4x4mm) SOIC-8 MIN. TYP. MAX. F Frequency 1800 2300 MHz f = 1960MHz 11.0 f = 2140MHz 10.5 f = 1960MHz 33.0 f = 2140MHz 33.0 f = 1960MHz 49.0 f = 2140MHz 48.0 ACPR1 Pout = 24.5dBm (WCDMA) f = 2140MHz -45 dBc Note 2 Gain Flatness (120MHz Band) f = 2140MHz ±0.5 dB RL in Input Return Loss, 50 Ohm f = 2000MHz 8.0 dB RL out Output Return Loss, 50 Ohm f = 2000MHz 10.0 dB Icop Operational Current @ P1dB 950 mA Vde Devi ce Vol tage 5.0 Vdc dBGain (Small Signal) TEST CONDITIONLIMITS UNITPARAMETER Note 2: ACPR measured for 3GPP test model 1, 64 DPCH. Channel Bandwidth = 3.84MHz. Frequency offset: +/- 5MHz. Note 1: OIP3 = Pout (by power meter, total 2-tone power) + (IM3(dB))/2) - 3dB SYMBOL OIP3 G P1dB Output Power @ 1dB Compression dBm Note 1Output Third Order Intercept dBm
EiC Corp. A Subsidiary of EiC Enterprises, Ltd. 45738 Northport Loop West, Fremont, CA 94538 Phone: (510) 979-8999 Fax: (510) 979-8902 www.eiccorp.com ECP200 Note: Exceeding any of the absolute maximum ratings may cause permanent damage to the device. Note: Do not exceed more than one parameter at the same time. RATING UNIT 8V o l t s 1400 mA +28 dBm -65 to +150 °C Ambient Operating Temperature -40 to +85 °C Absolute Maximum DC Power 4 Watts Storage Temperature PARAMETER RF Power Input Supply Voltage Supply Current PIN FUNCTION DEFINITION 1 Vref/pd This pin sets the reference / quiescient current. 2,4-5, 9, 12-15 GND These pins provide ground as well as the slug which is required for heat sinking. 3R F i n This pin connects to the input of the amplifier. It will have a dc voltage around 1.25 to 1.3 VDC. External circuit should provide DC blocking. 10,11 RF out These are the output pins, which connects to the collector of the transistor. On the PCB, the two pins should also be tied together. Vcc connects to these through an inductor. A DC blocking capacitor is required. 16 Vbias This pin provides current to the bias circuit , typically Vbias = Vcc. Bypass capacitors should be placed as close as practically possible to this pin. Absolute Maximum Ratings QFN-16 (4x4mm) Package Outline
EiC Corp. A Subsidiary of EiC Enterprises, Ltd. 45738 Northport Loop West, Fremont, CA 94538 Phone: (510) 979-8999 Fax: (510) 979-8902 www.eiccorp.com 3 Revision A SS-000536-000 ECP200
- UNIT = INCH 2. MOLD FLASH, PROTRUSIONS AND GATE BURRS AT THE END OF THE PACKAGE BODY SHALL NOT EXCEED 0.006" PER SIDE. 1. EXPOSED DIE PAD AREA MAY VARY. DIE PAD SIZE IS BASED ON L/F PAD SIZE. NOTES: UNLESS OTHERWISE SPECIFIED 0.236±0.008 0.016±0.003
0.050 BSC
0.194±0.003 7°±1° 3 4 5678 BOTTOM VIEW EXPOSED DIE PAD 0.080 0.080 0.016±0.002 45° ±0° 0.154±0.002 0.151±0.002 0.059±0.006
0.010 MAX
0.023±0.004 Pin Definitions PIN FUNCTION DEFINITION 1 Vref/pd This pin sets the reference / quiescient current. 2,4,5 GND These pins provide ground as well as the slug which is required for heat sinking. 3R F i n This pin connects to the input of the amplifier. It will have a dc voltage around 1.25 to 1.3 VDC. External circuit should provide DC blocking. 6,7 RF out These are the output pins, which connects to the collector of the transistor. On the PCB, the two pins should also be tied together. Vcc connects to these through an inductor. A DC blocking capacitor is required. 8V b i a s This pin provides current to the bias circuit , typically Vbias = Vcc. Bypass capacitors should be placed as close as practically possible to this pin.
EiC Corp. A Subsidiary of EiC Enterprises, Ltd. 45738 Northport Loop West, Fremont, CA 94538 Phone: (510) 979-8999 Fax: (510) 979-8902 www.eiccorp.com ECP200 Evaluation Board Application Schematics (4X4) 2.14GHz 1.96GHz
EiC Corp. A Subsidiary of EiC Enterprises, Ltd. 45738 Northport Loop West, Fremont, CA 94538 Phone: (510) 979-8999 Fax: (510) 979-8902 www.eiccorp.com 5 Revision A SS-000536-000 ECP200 Evaluation Board Bill of Material (4X4) 2 2 C1, C2 100pF CAPACITOR, 0603 ROHM MCH185A101JK NOTE1 1 1 C3 10.0uF CAPACITOR, 2512 PANASONIC ECS-H1CC106R NOTE1 3 3 C4, C7, C13 18pF CAPACITOR, 0603 ROHM MCH185A180JK NOTE1 3 3 C5, C8, C14 1000pF CAPACITOR, 0603 ROHM MCH185C102KK NOTE1 3 3 C9, C6, C15 1.0uF CAPACITOR, 0603 PANASONIC ECJ-1VF1A105Z NOTE1 -- 1 INPUT 4|5 C16 3pF CAPACITOR, 0603 ROHM MCH185A020CK NOTE1 1- - INPUT 6 C16 2.7pF CAPACITOR, 0603 ROHM MCH185A2R7CK NOTE1 -- 1 OUTPUT 2 C17 3.9pF CAPACITOR, 0603 ROHM MCH185A3R9CK NOTE1 1- - OUTPUT 1|2 C17 3.9pF CAPACITOR, 0603 ROHM MCH185A3R9CK NOTE1 1 OUTPUT 4 C18 1.5pF CAPACITOR, 0603 ROHM MCH185A1R5CK NOTE1 1- - OUTPUT 5 C18 1.5pF CAPACITOR, 0603 ROHM MCH185A1R5CK NOTE1
11 R 1 0 Ω RESISTOR, 0603 ROHM MCR03EZHJ000 NOTE1
1 1 L1 15 nH INDUCTOR, 0805 CTLL 2012-15N NOTE1 2 2 J2, J3 --- SMA CONNECTOR EF JOHNSON 142-0701-881 NOTE1 1 1 J1 --- RT ANG. CONN. SULLINS ELEC PZC04SGAN 1 1 --- IC, ECP200D (4X4) EiC Corp 1 1 --- PCB (4X4) EiC Corp 60-000523-000B 1.9GHz Qty. 2.14GHz Qty. Location (See eval brd. Layout) DESIG. VALUE DESCRIPTION MANUFACTURER & P/N Evaluation Board Layout Gnd Vcc J2 9 RFin 467 5 3 U11 76