ECO30 ECM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
ECM OCXO Crystal Oscillator ECM Electronics Limited, Penmaen House, Ashington, West Sussex, RH20 3JR, UK Tel: +44(0 )1903 892810: Fax: +44(0)1903 892738. Email: ecm@ecmelectronics.co.uk Although we have attempted to accurately reflect the products we market. ECM reserve the right without prior notice to discontinue any product or make design changes we believe necessary. Issue 2 ECO30 Series Parameter ECO30 Frequency Range 5.0MHz to 20.0MHz Specify Supply Voltage +5 (A) +9 (B), +12 (C) +15 (D) +18 (E) +24 (F) Specify Supply Voltage Stability +/-0.05ppm +/-5% Stability Over 24Hrs +/-0.05ppm Adjustment +/-0.5ppm on delivery ( Vc at 2.5V ) If Fitted Frequency Adjustment Internal Trimmer Voltage Control +/-15pp min ( Vc at 2.5V ) (A) +/-15ppm over 0-5 Vc (B) Both (C) If Fitted If Fitted Temerature Stability +/-0.1ppm 0 0 C to + 60 0 C A +/-0.1ppm -10 0 C to + 60 0 C B +/-0.2ppm -10 0 C to + 70 0 C C +/-0.2ppm -40 0 C to + 70 0 C D +/-0.1ppm -10 0 C to + 70 0 C E Specify Output HCMOS Symmetry 45/55% Warm Up Time 1 Hour to Full Specification Warm Up Power 7.5W max Steady State 2W max @ 25 0 C in still air Aging Cold Weld Glass +/-0.05ppm/day after 24 Hours +/-3ppm 1 st yr +/-0.02ppm/day after 24 Hours +/-1ppm 1 st yr § +/- 0.1ppm Stability § Internal or External Trimmer § Fast Delivery § European Manufacture § Custom Options A B C D E F G H Dimmensions in mm Pin 1 2 3 4 5 Connection Vc Nc Vcc O/P GND
Ordering Information
Part Number ECO30 H 10.0 B A B A Type Output Frequency Stability Supply Voltage Trim Option Internal A External B Both C Cold Weld Glass