ECHA201VSN122MR45S

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. Overvoltage resistant design, 105℃ CHASeries ・Doesn't spark with DC over voltage ・Downsized from current KLG series ・Endurance with ripple current : 2,000 hours at 105℃ ・Non solvent resistant type ・RoHS Compliant ◆SPECIFICATIONS (at 20℃, 120Hz) (at 20℃ after 5 minutes) (at 20℃, 120Hz) (at 120Hz) (at 20℃, 1MHz) Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tanδ) Low Temperature Characteristics (Max.Impedance Ratio) ESL Endurance Shelf Life Items -25 to +105℃ 200 to 450Vdc ±20% (M) I≦3 CV Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (Vdc) 200Vdc : 0.15 max. (0.20 max. for φD=35mm) 400Vdc : 0.15 max. Rated Voltage (Vdc) Z(-25℃) / Z(+20℃) 50nH max. The following specifications shall be satisfied when the capacitors are restored to 20 ℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 105 ℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±15% of the initial value D.F. (tanδ) ≦150% of the initial specified value Leakage current ≦The initial specified value Characteristics 200 to 450V ◆DIMENSIONS [mm]

• Terminal Code : VS (φ22 to φ35) 4.0±0.5 φD+1max. Vent Sleeve (PET : Brown) L±2 Negative mark PC board pin-out 2-φ2 The standard design has no plastic disc. ◆PART NUMBERING SYSTEM Supplement code Size code Capacitance tolerance code Capacitance code (ex. 56µF:560,100µF:101) Dummy terminal code Terminal code Voltage code (ex. 200V:201,400V:401) Series code Category E C H A V S N SM 1 3 42 6 7 8 9 10 13125 18171611 1514 Please refer to "Product code guide (snap-in type)" ◆RATED RIPPLE CURRENT MULTIPLIERS Frequency(Hz) Rated Voltage(Vdc) 50 120 300 1k 10k 50k ・Frequency Multipliers The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Downsized Downsized Longer life CHAKLG LXH P257 255 CAT. No. E1001N LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS

Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. Overvoltage resistant design, 105℃ CHASeries ◆STANDARD RATINGS WV (Vdc) (Vdc) Cap (µF) Case size φD×L(mm)φD×L(mm) tanδ Rated ripple current (Arms/ 105℃,120Hz) Part No. 200 180 22×20 0.15 0.82 ECHA201VSN181MP20S 220 22×20 0.15 0.90 ECHA201VSN221MP20S 270 22×25 0.15 1.02 ECHA201VSN271MP25S 330 22×30 0.15 1.20 ECHA201VSN331MP30S 330 25.4×25 0.15 1.20 ECHA201VSN331MQ25S 390 22×30 0.15 1.35 ECHA201VSN391MP30S 390 25.4×25 0.15 1.35 ECHA201VSN391MQ25S 470 22×35 0.15 1.45 ECHA201VSN471MP35S 470 25.4×30 0.15 1.45 ECHA201VSN471MQ30S 470 30×25 0.15 1.47 ECHA201VSN471MR25S 560 22×40 0.15 1.62 ECHA201VSN561MP40S 560 25.4×30 0.15 1.60 ECHA201VSN561MQ30S 560 30×25 0.15 1.60 ECHA201VSN561MR25S 680 25.4×35 0.15 1.82 ECHA201VSN681MQ35S 680 30×30 0.15 1.81 ECHA201VSN681MR30S 680 35×25 0.20 1.86 ECHA201VSN681MA25S 820 25.4×45 0.15 2.11 ECHA201VSN821MQ45S 820 30×35 0.15 2.11 ECHA201VSN821MR35S 820 35×25 0.20 2.11 ECHA201VSN821MA25S 1,000 30×35 0.15 2.40 ECHA201VSN102MR35S 1,000 35×30 0.20 2.40 ECHA201VSN102MA30S 1,200 30×45 0.15 2.69 ECHA201VSN122MR45S 1,200 35×35 0.20 2.65 ECHA201VSN122MA35S 250 120 22×20 0.15 0.68 ECHA251VSN121MP20S 180 22×25 0.15 0.87 ECHA251VSN181MP25S 180 25.4×20 0.15 0.93 ECHA251VSN181MQ20S 220 22×30 0.15 1.00 ECHA251VSN221MP30S 270 22×35 0.15 1.14 ECHA251VSN271MP35S 270 25.4×25 0.15 1.13 ECHA251VSN271MQ25S 270 30×20 0.15 1.25 ECHA251VSN271MR20S 330 22×40 0.15 1.28 ECHA251VSN331MP40S 330 25.4×30 0.15 1.29 ECHA251VSN331MQ30S 390 22×45 0.15 1.42 ECHA251VSN391MP45S 390 25.4×35 0.15 1.46 ECHA251VSN391MQ35S 390 30×25 0.15 1.52 ECHA251VSN391MR25S 390 35×20 0.20 1.62 ECHA251VSN391MA20S 470 25.4×40 0.15 1.64 ECHA251VSN471MQ40S 470 30×30 0.15 1.67 ECHA251VSN471MR30S 560 25.4×45 0.15 1.82 ECHA251VSN561MQ45S 560 30×35 0.15 1.87 ECHA251VSN561MR35S 560 35×25 0.20 1.99 ECHA251VSN561MA25S WV Cap Case size Rated ripple current (Arms/ 105℃,120Hz) Part No. 250 680 30×40 0.15 2.12 ECHA251VSN681MR40S 680 35×30 0.20 2.19 ECHA251VSN681MA30S 820 30×45 0.15 2.39 ECHA251VSN821MR45S 820 35×35 0.20 2.42 ECHA251VSN821MA35S 400 56 22×20 0.15 0.45 ECHA401VSN560MP20S 68 22×20 0.15 0.51 ECHA401VSN680MP20S 82 22×25 0.15 0.58 ECHA401VSN820MP25S 100 22×25 0.15 0.66 ECHA401VSN101MP25S 100 25.4×25 0.15 0.66 ECHA401VSN101MQ25S 120 22×30 0.15 0.76 ECHA401VSN121MP30S 120 25.4×25 0.15 0.76 ECHA401VSN121MQ25S 150 22×35 0.15 0.85 ECHA401VSN151MP35S 150 25.4×30 0.15 0.85 ECHA401VSN151MQ30S 150 30×25 0.15 0.85 ECHA401VSN151MR25S 180 22×40 0.15 0.94 ECHA401VSN181MP40S 180 25.4×35 0.15 0.95 ECHA401VSN181MQ35S 180 30×25 0.15 0.95 ECHA401VSN181MR25S 220 25.4×35 0.15 1.24 ECHA401VSN221MQ35S 220 30×30 0.15 1.24 ECHA401VSN221MR30S 220 35×25 0.15 1.24 ECHA401VSN221MA25S 270 25.4×45 0.15 1.30 ECHA401VSN271MQ45S 270 30×35 0.15 1.30 ECHA401VSN271MR35S 270 35×25 0.15 1.30 ECHA401VSN271MA25S 330 30×35 0.15 1.45 ECHA401VSN331MR35S 330 30×40 0.15 1.47 ECHA401VSN331MR40S 330 35×30 0.15 1.47 ECHA401VSN331MA30S 450 82 25.4×25 0.20 0.61 ECHA451VSN820MQ25S 120 25.4×30 0.20 0.76 ECHA451VSN121MQ30S 120 30×25 0.20 0.77 ECHA451VSN121MR25S 150 25.4×35 0.20 0.88 ECHA451VSN151MQ35S 180 25.4×40 0.20 0.99 ECHA451VSN181MQ40S 180 30×30 0.20 0.97 ECHA451VSN181MR30S 180 30×35 0.20 1.00 ECHA451VSN181MR35S 220 30×35 0.20 1.30 ECHA451VSN221MR35S 220 35×25 0.20 1.20 ECHA451VSN221MA25S 270 30×40 0.20 1.28 ECHA451VSN271MR40S 270 35×30 0.20 1.30 ECHA451VSN271MA30S 330 35×35 0.20 1.40 ECHA451VSN331MA35S 390 35×40 0.20 1.60 ECHA451VSN391MA40S 420 35×50 0.20 1.56 ECHA451VSN421MA50S (µF) tanδ ◆DC OVERVOLTAGE TEST CONDITIONS The vent will operate and the capacitor shall become an open circuit without burning materials when the following test DC voltage is applied.

• Test DC voltage Rated Voltage 200Vdc 250Vdc 400Vdc 450Vdc Nominal Capacitance <330µF 330µF≦C<470µF 330µF≦C<470µF 100µF≦C<220µF 100µF≦C<220µF ≧470µF ≧470µF ≧220µF ≧220µF <330µF <100µF <100µF Current Limit Test Voltage 300/375Vdc 350/450Vdc 500/600Vdc 550/675Vdc
• Test Circuit AC input SW CX Constant DC voltage/current power supply 256 CAT. No. E1001N LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS