ECASD40E337M006KA0

ECASD40E337M006KA0 MURATA | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 14

Technical content

Specification No. JECPY1 -9012H-01 Product Specification For Reference Issued Date: 16/April/2024 Part Description: Polymer Aluminum Electrolytic Capacitor Customer Part No.: MURATA Part No.: ECAS Series Murata Manufacturing Co.,Ltd. Chemical Device Department Polymer Capacitor Product Marketing Section (Company name/Dept.) All specifications may be changed without notice. Please check with our sales representatives or product engineers before ordering. (Y20) RoHS Compliant

Specification No. JECPY1-9012H-01 P. 2 / 14 Murata Manufacturing Co., Ltd. For Reference 1. Scope These specifications are applied to Polymer Aluminum Electrolytic Capacitor for electronic equipment use. Please contact us beforehand when you use it besides this use. 2. Part Number Description ① Series ：ECAS ② Dimensions ：See 3.1 ③ Rated Voltage ：See 3.2 ④ Capacitance ：See 3.3 ⑤ Capacitance Tolerance ：See 3.4 ⑥ ESR ：See 3.5 ⑦ Packing ：See 3.6 ⑧ Individual Specification Code ：Murata management Code 3. Descriptions

3.1 Dimensions （mm）

3.2 Rated Voltage

0E 2.5V 0J 6.3V 1A 10V 1C 16V 1D 20V 1E 25V

Specification No. JECPY1-9012H-01 P. 3 / 14 Murata Manufacturing Co., Ltd. For Reference

3.3 Capacitance

This code is shown by three- digit numeric. The unit is pico- farad (pF). The first and the second figures show the significant digits of the nominal capacitance, and the third figure shows the number of “0” following the significant digit. Ex.) Code Capacitance 476 47μF 107 100μF 227 220μF 477 470μF

3.4 Capacitance Tolerance

3.5 ESR

This code is shown by three-digit alphanumeric. The unit is milli-ohm (mΩ). If there is a decimal point, it is expressed by the capital letter "R". Ex.) Code ESR 4R5 4.5mΩ 009 9mΩ 010 10mΩ

3.6 Packing

3.7 Individual Specification Code

Expressed by two figures. Code Tolerance M ±20％ Code Specification K Φ330mmplastic taping packing

Specification No. JECPY1-9012H-01 P. 4 / 14 Murata Manufacturing Co., Ltd. For Reference 4. Part Number and Minimum Packaging Quantity

4.1 Part Numbers and Standards

(V.DC) Cap. (μF) Cap Tol. (%) Case Size ESR (mΩ) 100kHz/ +25℃ Leakage Current (μA) Ripple Current (Arms) /100kHz Reflow Peak Temp. (℃) (1) T≦ 45℃ 45℃<T ≦85℃ 85℃<T ≦105℃ ECASD41A107M015KA0 10 100 ±20 D4 15 300.0 4.2 2.9 1.0 260 ECASD61A157M010KA0 10 150 ±20 D6 10 150.0 4.4 3.0 1.1 260 ECASD31C476M040KA0 16 47 ±20 D3 40 225.6 3.2 2.2 0.8 260 ECASD41C686M040KA0 16 68 ±20 D4 40 326.4 3.2 2.2 0.8 260 ECASD61C107M012KA0 16 100 ±20 D6 12 480.0 4.0 2.8 1.0 260 ECASD31E156M040KA0 25 15 ±20 D3 40 112.5 3.2 2.2 0.8 260 ECASD31E226M040KA0 25 22 ±20 D3 40 165.0 3.2 2.2 0.8 260 ECASD41E336M040KA0 25 33 ±20 D4 40 247.5 3.2 2.2 0.8 260 Note: (1) Please refer to ＜7＞Reflow Soldering, ＜ Figure 1. ＞ for our recommended reflow profile. (P.12)

Specification No. JECPY1-9012H-01 P. 5 / 14 Murata Manufacturing Co., Ltd. For Reference

4.2 Minimum Packaging Quantity

Case Size Minimum Packaging Quantity(pcs) D3 3,000 D4 3,000 D6 2,500 5. Markings 6. Characteristics No Item Characteristics Test Conditions

1 Operating temperature range -40℃～＋105℃ -

2 Leakage Current ≦The value of No.4.1 Series resistor: 1000 ohm Applied voltage: Rated Voltage Measuring after 2 minutes of application Please conduct pre-conditioning below, if you have a doubt. Pre-conditioning: ・Temperature: 105℃. ・Applied voltage :Rated Voltage ・Series resistor:1000 ohm ・Charge time:1 hour. Then discharge and keep in the room temperature for 4h to 24h. 3 Capacitance tolerance (See No.4.1) Measuring frequency: 120Hz ±10% Measuring circuit: Equivalent series circuit Measuring voltage: +1Vr.m.s. Measuring temperature: 25 ℃ 4 Dissipation Factor ≦0.06 5 ESR ≦The value of No.4.1 Measuring frequency: 100kHz ±10% Measuring voltage: no more than +1Vr.m.s. Measuring temperature: 25 ℃ 6 Allowable Ripple Current (See No.4.1) Measuring frequency: 100kHz ±10% Part temperature: +20 to +105 ℃

7 Solderability

More than 75% of each terminal face is covered by new solder Lead Free Solder: Sn/3.0Ag/0.5Cu Flux: Rosin 25%, IPA 75% Solder temperature: 245 ±3℃ Immersing time: 3 ±0.3s Polarity indicator bar (+) Rated Voltage (2 digits) Code Voltage 0D 2V 0E 2.5V 0J 6.3V 1A 10V 1C 16V 1D 20V 1E 25V Capacitance Code (3 digits) Code Capacitance 476 47μF 107 100μF 227 220μF 477 470μF

Specification No. JECPY1-9012H-01 P. 6 / 14 Murata Manufacturing Co., Ltd. For Reference No. Item Characteristics Test Conditions Moisture resistance under no bias Leakage Current ≦ 300% of initial specified value ≦ 750% of initial specified value (ECASD40E337M006KA0, ECA SD40E477M4R5KA0, ECASD40 E477M006KA0) Test temperature: 60±2℃ Relative humidity: 90~95%RH Test time: 500+24, -0h Capacitance Change -20% and +50% of initial measured value Dissipation Factor ≦ 0.12 Appearance No defects or abnormalities Moisture resistance under load Leakage Current ≦The value of No.4.1 Test temperature: 60±2℃ Relative humidity: 90~95%RH Test time: 500+24, -0h Applied voltage: Rated Voltage Capacitance Change -20% and +50% of initial measured value Dissipation Factor ≦ 0.12 Appearance No defects or abnormalities

10 Shelf life

Current ≦The value of No.4.1 Test temperature: 105±2℃ Test time: 1000+48, -0h Capacitance Change ±10% of initial measured value Dissipation Factor ≦ 0.06 Appearance No defects or abnormalities

11 Endurance

Current ≦The value of No.4.1 Test temperature: 105±2℃ Test time: 2000+48, -0h Applied voltage: Rated Voltage Capacitance Change ±20% of initial measured value Dissipation Factor ≦ 0.06 Appearance No defects or abnormalities

12 Surge

Current ≦The value of No.4.1 Temperature: +85℃ for W.V. 2V~10V Room temp. for W.V. 12.5V~25V Applied voltage: Rated voltage x1.25 Current Limiting resistance: 33ohm (in series) for W.V. 2V~10V 1kohm (in series) for W.V. 12.5V~25V Discharge resistance: 33ohm (in series) for W.V. 2V~10V 1kohm (in series) for W.V. 12.5V~25V Charge on/off: 30 sec. each, 1000 times Capacitance Change ±10% of initial measured value Dissipation Factor ≦ 0.06 Appearance No defects or abnormalities The measurement condition in No.2 to 4 applies to No.8 to 12.

Specification No. JECPY1-9012H-01 P. 7 / 14 Murata Manufacturing Co., Ltd. For Reference 7. Packaging

7.1 Carrier Tape Configuration and Dimension

Cavity Size (mm) Minimum Qty. (pcs.) A* B* C* D* D3, D4 4.60 7.65 2.16 0.23 3,000 D6 4.60 7.65 3.20 0.27 2,500 * Nominal values

7.2 Tape Packaging

Capacitors will be inserted in embossed carrier tape that will be sealed with cover tape as described below. No more than half of a sprocket hole will be covered by cover tape.

7.3 Taping Leader

Tape has a leader and a trailer as described below. Polarity (－) (＋)

Specification No. JECPY1-9012H-01 P. 8 / 14 Murata Manufacturing Co., Ltd. For Reference

7.4 Cover Tape Peel Strength

Cover tape peel strength required to be within the range of 0.1-0.8N when tested as below .

7.5 Empty Cavities of Carrier Tape Section

Empty cavities of filled section must be lower than 0.1% or 1pc of the total of reel quantity and sequential empty cavities are not allowed. Devices placed in one reel must satisfy the specified reel quantity.

7.6 Reel Configuration and Dimension

Tape with capacitors is wound in a reel as described below. (mm) Reel Size Tape Width A B W W1 Φ330 12 330.0 ±2.0 100.0 ±1.0 17.4 ±1.5 13.4 ±1.5

7.7 Labels on Reel

Shipping Label that show the customer parts number, our parts number, our company name, inspection number and quantity, will be put in outside of reel. Please note the position of sipping label when feeding a tape. W A B W 90 ° ～180 ° F カ バー テ ー プ キャリアテープ Cover Tape Carrier TapePeeling Speed ： 300ｍｍ/min 165°～180°

Specification No. JECPY1-9012H-01 P. 9 / 14 Murata Manufacturing Co., Ltd. For Reference

7.8 Moisture Proof Aluminum Laminated Bag Packaging

A reel of the products is packaged in a moisture proof aluminum laminated bag and labels are put on the bag as shown below. One desiccant and a humidity indicator are put on the backside of the reel before slightly drawing the vacuum and sealing the bag. <Front> <Back> Note) The size of the Moisture Proof Aluminum Laminated Bag is a rough value.

7.9 Cardboard Box Packaging

Moisture proof aluminum laminated bags of products are packaged in a cardboard box. 8. Quality Assurance ＜1＞Murata’s responsibility for the quality of this product shall be limited to those specified in this document. ＜2＞It is a customer’s responsibility to judge fitness of this product for assembly process, end use and operating environment. 400 Seal Shipping Label Explanatory Label of bag

400 Unit: mm

Specification No. JECPY1-9012H-01 P. 10 / 14 Murata Manufacturing Co., Ltd. For Reference 9. Caution for Use Caution

9.1 Limitation of Applications

The products listed in the Product Specification (hereinafter the product(s) is called as the “Product(s)”) are designed and manufactured for applications specified in the Product Specification. (hereinafter called as the “Specific Application”). We shall not warrant anything in connection with the Products including fitness, performance, adequateness, safety, or quality, in the case of applications listed in from (1) to (11) written at the end of this precautions, w hich may generally require high performance, function, quality, management of production or safety. Therefore, the Product shall be applied in compliance with the specific application. WE DISCLAIM ANY LOSS AND DAMAGES ARISING FROM OR IN CONNECTION WITH THE PRODUCTS INCLUDING BUT NOT LIMITED TO THE CASE SUCH LOSS AND DAMAGES CAUSED BY THE UNEXPECTED ACCIDENT, IN EVENT THAT (i) THE PRODUCT IS APPLIED FOR THE PURPOSE WHICH IS NOT SPECIFIED AS THE SPECIFIC APPLICATION FOR THE PRODUCT, AND/OR (ii) THE PRODUCT IS APPLIED FOR ANY FOLLOWING APPLICATION PURPOSES FROM (1) TO (11) (EXCEPT THAT SUCH APPLICATION PURPOSE IS UNAMBIGUOUSLY SPECIFIED AS SPECIFIC APPLICATION FOR THE PRODUCT IN OUR CATALOG SPECIFICATION FORMS, DATASHEETS, OR OTHER DOCUMENTS OFFICIALLY ISSUED BY US*). (1) Aircraft equipment (2) Aerospace equipment (3) Undersea equipment (4) Power plant control equipment (5) Medical equipment (6) Transportation equipment (7) Traffic control equipment (8) Disaster prevention/security equipment (9) Industrial data-processing equipment (10) Combustion/explosion control equipment (11) Equipment with complexity and/or required reliability equivalent to the applications listed in the above. For exploring information of the Products which will be compatible with the particular purpose other than those specified in the Product Specification, please contact our sales offices, distribution agents, or trading companies with which you make a deal, or via our web contact form. Contact form: https://www.murata.com/contactform *We may design and manufacture particular Products for applications listed in (1) to (11). Provided that, in such case we shall unambiguously specify such Specific Application in the Product Specification without any exception. Therefore, any other documents and/or performances, whether exist or non- exist, shall not be deemed as the evidence to imply that we accept the applications listed in (1) to (11).

Specification No. JECPY1-9012H-01 P. 11 / 14 Murata Manufacturing Co., Ltd. For Reference Caution

9.2 Storage Condition

＜1＞Term of warranty for this product is two years after pac kaging in a moisture- proof bag, under the conditions below with sealed packaging. Recommended storage environment Room temperature: 5- 30 degree Humidity: no more than 60%RH ＜2＞Polymer aluminum electrolytic capacitors should not be stored in an atmosphere consisting of corrosive gas(e.g. hydrogen sulfide, sulfur dioxide, chlorine, ammonia gas, etc.). ＜3＞Polymer aluminum electrolytic capacitors should be stored in a dry atmosphere, avoiding direct sunlight and condensation. If capacitors are kept at a higher humidity, the following problems may occur: ① Leakage current will increase at the beginning of use and damage the circuit. ② Moisture absorbed in a resin will evaporate and expand with heat of mounting and damage the mold resin. ＜4＞Please confirm a dry state with a humidity indicator card after open immediately. If 20% indication was in a pink state after opened, it is recommended to bake under the conditions below. ＜5＞The capacitors should be kept dry using desiccators or any other methods after unsealing the moisture-proof packaging. If more than one week has passed under the recommended storage environment specified above after unsealing the packaging, it is recommended to bake under the conditions below. Recommended baking conditions Temperature: 60(+0, -5) degree C Time: 168 hours ＜6＞This product meets MSL-3.

Specification No. JECPY1-9012H-01 P. 12 / 14 Murata Manufacturing Co., Ltd. For Reference Caution

9.3 Cautions for Use

＜1＞Prohibited Circuits for use Do not use the capacitor with the following circuit. ① Time-constant circuit ② Coupling circuits ③ 2 or more capacitors connected serially ④ Circuit which are greatly affected by leakage current ＜2＞Polarity Polymer aluminum electrolytic capacitor is polarized. Please not to reverse the polarity when using. If reverse voltage is applied even momentary, it may damage the oxide film and the capacitor itself. Please verify the orientation of the capacitor before use in accordance with the drawing of “Markings” in Item 5. ＜3＞Operating Voltage When DC-rated capacitors are to be used in AC or ripple current circuits, be sure to maintain the Vo-p value of the applied voltage or the Vo-p which contains DC bias within the rated voltage range. When the voltage is applied to the circuit, starting or stopping may generate irregular voltage for a transit period because of resonance or switching. Be sure to use a capacitor with a rated voltage range that includes these irregular voltages. ＜4＞Inrush Current Extreme inrush current may cause short circuit or leakage current increase. If the inrush current exceeds 20A, adding protection circuit is recommended. ＜5＞Allowable Ripple Current Please not to apply ripple current exceeding the allowable value specified in the standards in Item 4.1. If excessive current is applied, it may generate heat and the heat may damage the capacitor. The sum of DC voltage and the peak AC voltage shall not exceed the rated voltage. The sum of the DC voltage and the peak AC voltage shall not allow a voltage reversal. ＜6＞Operating Temperature The operating temperature limit depends on the capacitor. ① Do not apply temperature exceeding the upper operating temperature. It is necessary to select a capacitor with a suitable rated temperature that will cover the operating temperature range. Also it is necessary to consider the temperature distribution in equipment and the seasonal temperature variable factor. ② Consider the self-heating of the capacitor. The surface temperature of the capacitor shall be the upper operating temperature or less when including the self-heating factors.

Specification No. JECPY1-9012H-01 P. 13 / 14 Murata Manufacturing Co., Ltd. For Reference ＜7＞Reflow Soldering ① Please not to apply excessive force to the capacitor during insertion as well as after soldering. The excessive force may result in damage to electrode terminals and/or degradation of electrical performance. ② Resistance testing to reflow soldering was conducted in accordance with the reflow profile described in Figure 1. If this profile is adopted, reflow soldering can be repeated no more than two times. Figure 1.＞Our Recommended Reflow Profile Peak temp.: 260℃ max. Peak temp.: 245℃ max. ③ Please refer to figure below for designing land pattern.

Specification No. JECPY1-9012H-01 P. 14 / 14 Murata Manufacturing Co., Ltd. For Reference ＜8＞Operating environment Confirm the environment in which the equipment will operate is under the specified conditions. Do not use the equipment under the following environments. ① Being spattered with water or oil. ② Being exposed to direct sunlight. ③ Being exposed to Ozone, ultraviolet rays or radiation. ④ Being exposed to toxic gas (e.g. hydrogen sulfide, sulfur dioxide, chlorine, ammoniagas, etc.) ⑤ Being exposed to excessive vibrations or mechanical shocks. ⑥ Being exposed to condensable environments. ＜9＞ Disposal Polymer aluminum electrolytic capacitors should be disposed of as industrial waste in accordance with laws.

9.4 Manufacturing factory

Murata Electronics (Thailand), Ltd. 10. Request ① When using the product, please be sure to evaluate it in the condition of being mounted on your product. ② Please do not use this product deviating from the description in this delivery specification. ③ We believe that it is not appropriate to include contractual matters related to transactions in specifications, drawings, and other technical documents. Therefore, if the technical documents prepared by your company contain any statement regarding quality assurance, product liability, industrial property rights, export control, etc., such statement shall be deemed invalid. We would like to ask you to agree to these matters in a separate basic transaction agreement.