ECA-1CHG101B

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Aluminum Electrolytic Capacitors/ NHG – EEE-99 – φ5t o φ8 φD±0.5 φd±0.05 F±0.5 Sleeve 14 min. 3 min.L✽ ✽ L<16:L ±1.0 L>20:L ±2.0 Pressure relief φ6.3< + φ10< φD±0.5 ■ Features

• Endurance : 105 °C 1000 h to 2000 h
• RoHS directive compliant Radial Lead Type Series: NHG Type: A ■ Specifi cations Category Temp. Range –55 °C to +105 °C –25 °C to +105 °C Nominal Cap. Range 0 .1 µF to 22000 µF 1.0 µF to 330 µF Capacitance Tolerance ±20 % (120 Hz/+20 °C) DC Leak age Cur rent I < 0.01 CV or 3 (µA) After 2 minutes (Which is greater) I < 0.06 CV +10 (µA) After 2 minutes tan δ Please see the attached standard products list Endurance After following life test with DC voltage and +105 °C±2 °C ripple curren t value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage), When the capacitors are restored to 20 °C, the capacitors shall meet the limits specifi ed below. Duration : 6.3 V.DC to 100 V.DC : ( φ5 to φ8)=1000 hours, (φ10 to φ18)=2000 hours 160 V.DC to 450 V.DC : 2000 hours Capacitance change ±20 % of initial measured value tan δ < 200 % of initial specifi ed value DC leakage current < initial specifi ed value Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment) ■ Di men sions in mm (not to scale) W.V.(V.DC) Cap. (µF) Frequency (Hz) 60 120 1 k 1 0 k 100 k 6.3 to 100 ■ Frequency correction factor for ripple current Body Dia. φD5 6 . 3 8 1 0 1 2 . 5 1 6 1 8 (Unit : mm) 00 Nov. 2012

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Aluminum Electrolytic Capacitors/ NHG – EEE-100 – ■ Standard Prod ucts W.V. Cap. (±20 %) Case size Specifi cation Lead Length Part No. Min. Packaging Q'ty Dia. Length Ripple Current (120 Hz) (+105 °C) tan δ (120 Hz) (+20 °C) Endur- ance Lead Dia. Lead Space Straight Leads TapingStraight Taping Taping (V) (µF) ( mm) (mm) (mA r.m.s.) (hours) (mm) ( mm) (mm) (mm) (pcs) (pcs) 6.3 2200 10 16 710 0.3 02 000 0.6 5 .0 5.0 ECA0JHG222( ) 200 500 3300 10 20 840 0.3 22 000 0.6 5 .0 5.0 ECA0JHG332( ) 200 500 10000 16 25 1650 0.46 2000 0.8 7 .5 7 .5 ECA0JHG103( ) 100 250 15000 16 31.5 2010 0.56 2000 0.8 7 .5 ECA0JHG153 100 22000 18 35.5 2350 0.70 2000 0.8 7 .5 ECA0JHG223 50 2200 10 20 760 0.2 62 000 0.6 5 .0 5.0 ECA1AHG222( ) 200 500 6800 16 25 1570 0.34 2000 0.8 7 .5 7 .5 ECA1AHG682( ) 100 250 10000 16 31.5 1890 0.42 2000 0.8 7 .5 ECA1AHG103 100 15000 18 35.5 2180 0.52 2000 0.8 7 .5 ECA1AHG153 50 1000 10 16 560 0.20 2000 0.6 5.0 5.0 ECA1CHG102( ) 200 500 4700 16 25 1480 0.26 2000 0.8 7 .5 7 .5 ECA1CHG472( ) 100 250 6800 16 31.5 1780 0.30 2000 0.8 7.5 ECA1CHG682 100 10000 18 35.5 2060 0.38 2000 0.8 7 .5 ECA1CHG103 50 1000 10 20 680 0. 16 2000 0.6 5.0 5.0 ECA1EHG102( ) 200 500 3300 16 25 14 00 0.20 2000 0.8 7 .5 7 .5 ECA1EHG332( ) 100 250 4700 16 31.5 1750 0.22 2000 0.8 7.5 ECA1EHG472 100 6800 18 35.5 2040 0.26 2000 0.8 7.5 ECA1EHG682 50 470 10 16 460 0.14 2000 0.6 5 .0 5.0 ECA1VHG471( ) 200 500 2200 16 25 12 60 0.16 2 000 0.8 7 .5 7 .5 ECA1VHG222( ) 100 250 3300 16 31.5 1610 0.18 2 000 0.8 7 .5 ECA1VHG332 100 4700 18 35.5 1910 0.20 2000 0.8 7.5 ECA1VHG472 50

• When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, i=2.5 mm .
• Please refer to the page of “Taping Dimensions”. 00 Nov. 2012

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Aluminum Electrolytic Capacitors/ NHG – EEE-101 – ■ Standard Prod ucts W.V. Cap. (±20 %) Case size Specifi cation Lead Length Part No. Min. Packaging Q'ty Dia. Length Ripple Current (120 Hz) (+105 °C) tan δ (120 Hz) (+20 °C) Endur- ance Lead Dia. Lead Space Straight Leads TapingStraight Taping Taping (V) (µF) ( mm) (mm) (mA r.m.s.) (hours) (mm) ( mm) (mm) (mm) (pcs) (pcs) 330 10 16 410 0.12 2000 0.6 5 .0 5.0 ECA1HHG331( ) 200 500 470 10 20 530 0.12 2000 0.6 5 .0 5.0 ECA1HHG471( ) 200 500 2200 16 31.5 1470 0.14 2000 0.8 7.5 ECA1HHG222 100 3300 18 35.5 1770 0.16 2000 0.8 7.5 ECA1HHG332 50 220 10 16 335 0.10 2000 0.6 5 .0 5.0 ECA1JHG221( ) 200 500 330 10 20 510 0.10 2000 0.6 5 .0 5.0 ECA1JHG331( ) 200 500 1000 16 25 930 0. 10 2000 0.8 7 .5 7 .5 ECA1JHG102( ) 100 250 2200 18 35.5 1610 0.12 2000 0.8 7.5 ECA1JHG222 50 100

• When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, i=2.5 mm .
• Please refer to the page of “Taping Dimensions”. 00 Nov. 2012

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Aluminum Electrolytic Capacitors/ NHG – EEE-102 – ■ Standard Prod ucts W.V. Cap. (±20 %) Case size Specifi cation Lead Length Part No. Min. Packaging Q'ty Dia. Length Ripple Current (120 Hz) (+105 °C) tan δ (120 Hz) (+20 °C) Endur- ance Lead Dia. Lead Space Straight Leads TapingStraight Taping Taping (V) (µF) ( mm) (mm) (mA r.m.s.) (hours) (mm) ( mm) (mm) (mm) (pcs) (pcs) 100 100 10 20 265 0.08 2000 0.6 5.0 5.0 ECA2AHG101( ) 200 500 330 16 25 540 0.08 2000 0.8 7.5 7.5 ECA2AHG331( ) 100 250 470 16 25 715 0.08 2000 0.8 7.5 7.5 ECA2AHG471( ) 100 250 1000 18 35.5 985 0.08 2000 0.8 7 .5 ECA2AHG102 50 160 22 10 20 130 0.15 2 000 0.6 5 .0 5.0 ECA2CHG220( ) 200 500 33 10 20 180 0.15 2 000 0.6 5 .0 5.0 ECA2CHG330( ) 200 500 100 16 25 335 0.15 2000 0.8 7 .5 7 .5 ECA2CHG101( ) 100 250 220 16 31.5 540 0. 15 2 000 0.8 7 .5 ECA2CHG221 100 330 18 31.5 705 0. 15 2 000 0.8 7 .5 ECA2CHG331 50 200 10 10 16 80 0.15 2 000 0.6 5 .0 5.0 ECA2DHG100( ) 200 500 22 10 20 140 0.15 2 000 0.6 5 .0 5.0 ECA2DHG220( ) 200 500 220 18 31.5 575 0. 15 2 000 0.8 7 .5 ECA2DHG221 50 250 10 10 16 88 0.15 2 000 0.6 5 .0 5.0 ECA2EHG100( ) 200 500 100 16 31.5 365 0. 15 2 000 0.8 7 .5 ECA2EHG101 100 350 10 10 20 82 0.20 2 000 0.6 5 .0 5.0 ECA2VHG100( ) 200 500 33 16 25 195 0.20 2 000 0.8 7 .5 7 .5 ECA2VHG330( ) 100 250 47 16 25 230 0.20 2 000 0.8 7 .5 7 .5 ECA2VHG470( ) 100 250 100 18 31.5 375 0. 20 2 000 0.8 7 .5 ECA2VHG101 50

• When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, i=2.5 mm .
• Please refer to the page of “Taping Dimensions”. 00 Nov. 2012

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Aluminum Electrolytic Capacitors/ NHG – EEE-103 – ■ Standard Prod ucts W.V. Cap. (±20 %) Case size Specifi cation Lead Length Part No. Min. Packaging Q'ty Dia. Length Ripple Current (120 Hz) (+105 °C) tan δ (120 Hz) (+20 °C) Endur- ance Lead Dia. Lead Space Straight Leads TapingStraight Taping Taping (V) (µF) ( mm) (mm) (mA r.m.s.) (hours) (mm) ( mm) (mm) (mm) (pcs) (pcs) 400 10 10 20 80 0.24 2 000 0.6 5 .0 5.0 ECA2GHG100( ) 200 500 33 16 25 195 0.24 2 000 0.8 7 .5 7 .5 ECA2GHG330( ) 100 250 47 16 31.5 250 0 .24 2 000 0.8 7 .5 ECA2GHG470 100 450 22 16 25 115 0.24 2 000 0.8 7 .5 7 .5 ECA2WHG220( ) 100 250 33 16 31.5 155 0 .24 2 000 0.8 7 .5 ECA2WHG330 100

• When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, i=2.5 mm .
• Please refer to the page of “Taping Dimensions”. 00 Nov. 2012