DC95G104V ETC2 | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
- Precision, solid state temperature sensor
- Interchangeability down to ±0.18°F (±0.1°C)
- Suitable for use over a range of -112°F to 302°F (–80°C to 150°C)
- High sensitivity, greater than –4%/°C at 77°F (25°C)
- Suitable for temperature measurement, control and compensation
- High reliability and stability over an interchangeable range
- Most popular Resistance (R) vs Temperature (T) curves are available
- Resin-coated for good mechanical strength and resistance to solvents
- Rugged construction
- For DC95: .012 in (0.3mm) diameter bare tinned-copper lead wires
- For EC95: .008 in (0.2mm) diameter bare tinned-alloylead wires
- For TK95: .010 in (.25mm) diameter PTFE insulated lead wires
NTC Interchangeable Thermistor Chip Epoxy-coated, NTC interchangeable thermistor chips with bare tinned-copper lead wires. Options Consult Factory for Availability of Options
- Other resistance values in the range of 1000 Ω to 100 kΩ
- Other tolerances or ranges
- Alternative lead wires or lengths
- Non standard R vs T curves
- Controlled dimensions
- Special sensor assemblies or enclosures Thermal and Electrical Properties Dissipation Constant Still air: 1 mW/°C Stirred oil: 8 mW/°C Thermal Time Constant Still air: 10 seconds Stirred oil: 1 second Maximum Power at 77°F (25°C) 75 mW De-rated from 100% at 77°F (25°C) to 0% at 212°F (100°C) Tinned-copper alloy leads 0.012 in (0.3 mm) 1.5 in (38.1 mm) Epoxy-coated thermistor chip Ø 0.095 in (2.4 mm) maximum NTC Interchangeable Type DC95
Ordering Information
Select appropriate part number below for resistance and temperature tolerance desired. R25°C Material System S 32°F to 158°F (0°C to 70°C) ±0.18°F (±0.1°C) 32°F to 158°F (0°C to 70°C) ±0.36°F (±0.2°C) 32°F to 212°F (0 to 100°C) ±0.36°F (±0.2°C)
2000 F DC95F202V DC95F202W DC95F202Z
2252 F DC95F232V DC95F232W DC95F232Z
3000 F DC95F302V DC95F302W DC95F302Z
5000 F DC95F502V DC95F502W DC95F502Z
10000 F DC95F103V DC95F103W DC95F103Z
10000 Y DC95Y103V DC95Y103W DC95Y103Z
30000 H DC95H303V DC95H303W DC95H303Z
50000 G DC95G503V DC95G503W DC95G503Z
100000 Y DC95Y104V DC95Y104W DC95Y104Z
100000 G DC95G104V DC95G104W DC95G104Z
NTC Interchangeable Thermistor Chip Epoxy-coated, NTC interchangeable thermistor chips with bare tinned 180 alloy lead-wires. Options Consult Factory for Availability of Options
- Other resistance values in the range of 1000 Ω to 100 kΩ
- Other tolerances or ranges
- Alternative lead-wires or lengths
- Non standard R vs T curves
- Controlled dimensions
- Special sensor assemblies or enclosures Thermal and Electrical Properties Dissipation Constant Still air: 1 mW/°C Stirred oil: 8 mW/°C Thermal Time Constant Still air: 10 seconds Stirred oil: 1 second Maximum Power at 77°F (25°C) 75 mW De-rated from 100% at 77°F (25°C) to 0% at 212°F (100°C)
Select appropriate part number below for resistance and temperature tolerance desired. R25°C Material System -4°F to 122°F (-20°C to 50°C) ±0.36°F (±0.2°C) 32°F to 158°F (0°C to 70°C) ±0.18°F (±0.1°C) 32°F to 158°F (0 to 70°C) ±0.36°F (±0.2°C)
2252 F EC95F232U EC95F232V EC95F232W
3000 F EC95F302U EC95F302V EC95F302W
5000 F EC95F502U EC95F502V EC95F502W
10000 F EC95F103U EC95F103V EC95F103W
10000 Y EC95Y103U EC95Y103V EC95Y103W
30000 H EC95H303U EC95H303V EC95H303W
50000 G EC95G503U EC95G503V EC95G503W
100000 G EC95G104V EC95G104W
NTC Interchangeable Type EC95 dimensions Tinned alloy 180 leads Ø 0.008 in (0.20 mm) 2.5 in (63.5 mm) Epoxy-coated thermistor chip Ø 0.095 in (2.4 mm) maximum
© 2011 General Electric Company. All Rights Reserved. Specifications are subject to change without notice. GE is a registered trademark of General Electric Company. Other company or product names mentioned in this document may be trademarks or registered trademarks of their respective companies, which are not affiliated with GE. www.ge-mcs.com Type TK95 Specifications Insulated Lead NTC Interchangeable Thermistor Chip Epoxy-coated, NTC interchangeable thermistor chips with PTFE insulated nickel lead-wires. Options Consult Factory for Availability of Options
- Other resistance values in the range of 1000 Ω to 100 kΩ
- Other tolerances or ranges
- Alternative lead wires or lengths
- Non standard R vs T curves
- Controlled dimensions
- Special sensor assemblies or enclosures Thermal and Electrical Properties Dissipation Constant Still air: 1 mW/°C Stirred oil: 8 mW/°C Thermal Time Constant Still air: 10 seconds Stirred oil: 1 second Maximum Power at 77°F (25°C) 75 mW De-rated from 100% at 77°F (25°C) to 0% at 212°F (100°C) Ø 0.01 in (0.25 mm) ±0.001 Ø 0.025 in (0.65 mm) maximum 0.27 in (7 mm) maximum Ø 0.094 in (2.4 mm) maximum Ø 0.094 in (2.4 mm) maximum
Select appropriate part number below for resistance and temperature tolerance desired. R25°C Material System S 32°F to 158°F (0°C to 70°C) ±0.18°F (±0.1°C) 32°F to 158°F (0°C to 70°C) ±0.36°F (±0.2°C) 32°F to 212°F (0 to 100°C) ±0.36°F (±0.2°C)
2000 F TK95F202V TK95F202W TK95F202Z
2252 F TK95F232V TK95F232W TK95F232Z
3000 F TK95F302V TK95F302W TK95F302Z
5000 F TK95F502V TK95F502W TK95F502Z
10000 F TK95F103V TK95F103W TK95F103Z
10000 Y TK95Y103V TK95Y103W TK95Y103Z
30000 H TK95H303V TK95H303W TK95H303Z
50000 G TK95G503V TK95G503W TK95G503Z
100000 G TK95G104V TK95G104W TK95G104Z
NTC Interchangeable Type TK95 dimensions 0.195 in (5 mm) ±0.04 3 in (76 mm)