EC7 ECLIPTEK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234
DATE: July 19 th, 2006 TO: All Sales Personnel FROM: Mark Stoner RE: Product Termination To all concerned parties, This bulletin is to notify all customers of the discontinuation of the following Ecliptek series effective July 20 th, 2006: Series Description Recommended Replacement EC7 UM-1 Crystal E1M or E5M In compliance with our End of Life (EOL) policy, this will serve as advanced notice of product termination. New orders will not be accepted after September 31 st, 2006, with delivery to conclude by December 31st 2006. If there are any questions pertaining to this bulletin, please fell free to contact me. Thank you again for your cooperation. Best Regards, Mark W. Stoner Vice President of Marketing Ecliptek Corporation
- RoHS Compliant (Pb-Free) Inverted Mesa Crystal Fundamental mode frequencies to 212.5MHz UM-1 package AT cut Tight tolerance/stability Wide operating temperature range CRYSTAL EC7 ELECTRICAL SPECIFICATIONS MANUFACTURER CATEGORY SERIES PACKAGE CLASS REV.DATE ECLIPTEK CORP . CRYSTAL EC7 UM-1 CR36 03/06 EQUIVALENT SERIES RESISTANCE (ESR), MODE OF OPERATION (MODE), AND CUT NOTES Frequency Range Frequency Tolerance / Stability Over Operating Temperature Range Operating Temperature Range Aging (at 25°C) Storage Temperature Range Shunt Capacitance Drive Level Load Capacitance (C Motional Capacitance (C1) Insulation Resistance 44.737MHz to 212.500MHz ±50ppm / ±100ppm, ±30ppm/±50ppm ±15ppm / ±30ppm, or ±10ppm / ±30ppm 0°C to 70°C, -20°C to 70°C, or -40°C to 85°C ±3ppm / year Maximum -40°C to 85°C 5pF Maximum 100µWatts Maximum 18pF (Standard), Custom C L ≥ 10pF, or Series Resonant 3fF Min, 10fF Max (F0 < 100MHz), 3fF Min, 13fF Max (F0 > 100MHz)
500 Megaohms Minimum at 100VDC
44.737MHz to 50.000MHz 50.001MHz to 100.000MHz ESR (Ω)
25 Max
30 Max
100.001MHz to 160.000MHz 160.001MHz to 212.500MHz ESR (Ω)
35 Max
40 Max
800-ECLIPTEK www.ecliptek.com for latest revision 18 Specifications subject to change without notice. H 8.1 L 7.9 W 3.2
ALL DIMENSIONS IN MILLIMETERS MARKING SPECIFICATIONSENVIRONMENTAL/MECHANICAL SPECIFICATIONS PARAMETER SPECIFICATION Seal Integrity Bubble test in Perfluorocarbon at +125°C ±5°C for 60 seconds minimum. Solderability Sn63 Solder dip at +230°C ±5°C for 5 seconds/95% coverage. Marking Permanency 10 Strokes with brush after 1 minute soak in solvent, 3 times. Shock Random drop on hard wooden plate 3 times from a height of 50cm. Vibration Frequency with an amplitude of 1.5mm sweeping between 10Hz to 55Hz within 1 minute (approximately) for 2 hours minimum on each axis (X,Y and Z) for a total of 6 hours. Line 1: ECLIPTEK Line 2: XX.XXXM Frequency in MHz (5 Digits Maximum + Decimal) Line 3: XX Ecliptek Manufacturing Identifier FREQUENCY TOLERANCE / STABILITY Blank=±50ppm at 25°C, ±100ppm from 0°C to 70°C A=±50ppm at 25°C, ±100ppm from -20°C to 70°C B=±50ppm at 25°C, ±100ppm from -40°C to 85°C C=±30ppm at 25°C, ±50ppm from 0°C to 70°C D=±30ppm at 25°C, ±50ppm from -20°C to 70°C E=±30ppm at 25°C, ±50ppm from -40°C to 85°C F=±15ppm at 25°C, ±30ppm from 0°C to 70°C G=±15ppm at 25°C, ±30ppm from -20°C to 70°C H=±15ppm at 25°C, ±30ppm from -40°C to 85°C J=±10ppm at 25°C, ±30ppm from 0°C to 70°C K=±10ppm at 25°C, ±30ppm from -20°C to 70°C L=±10ppm at 25°C, ±30ppm from -40°C to 85°C EC7 A - 20 - 35.000M FREQUENCY LOAD CAPACITANCE Blank=18pF (Standard) S=Series, XX=XXpF (Custom) MANUFACTURER CATEGORY SERIES PACKAGE CLASS REV.DATE ECLIPTEK CORP . CRYSTAL EC7 UM-1 CR36 03/06 800-ECLIPTEK www.ecliptek.com for latest revision 19 Specifications subject to change without notice. NOTES