Datasheet-EC4DAW
Document overview
- PDF pages: 8
Technical content
Features
⚫ Efficiency Up to 87% ⚫ Fixed Switching Frequency ⚫ Regulated Outputs ⚫ Negative Remote On/Off ⚫ 3000Vdc I/O Isolation ⚫ Continuous Short Circuit Protection ⚫ Safety Meets IEC/EN/UL 62368-1 ⚫ Shock & Vibration MIL-STD-810F Compliant MODEL NUMBER INPUT VOLTAGE OUTPUT VOLTAGE OUTPUT CURRENT INPUT CURRENT % EFF. CAPACITOR LOAD MAX. MIN. MAX. NO LOAD FULL LOAD (3) (2) EC4DAW-24S33N 9-36 VDC 3.3 VDC 0 mA 1500 mA 5 mA 258 mA 81 80 4700 uF EC4DAW-24S05N 9-36 VDC 5 VDC 0 mA 1200 mA 6 mA 303 mA 83.5 82.5 2200 uF EC4DAW-24S12N 9-36 VDC 12 VDC 0 mA 500 mA 6 mA 289 mA 87 86.5 1100 uF EC4DAW-24S15N 9-36 VDC 15 VDC 0 mA 400 mA 7 mA 291 mA 87 86 470 uF EC4DAW-24D12N 9-36 VDC ±12 VDC 0 mA ±250 mA 9 mA 291 mA 86 86 660 uF EC4DAW-24D15N 9-36 VDC ±15 VDC 0 mA ±200 mA 9 mA 294 mA 85.5 85 220 uF EC4DAW-48S33N 18-74 VDC 3.3 VDC 0 mA 1500 mA 4 mA 128 mA 80.5 80.5 4700 uF EC4DAW-48S05N 18-74 VDC 5 VDC 0 mA 1200 mA 4 mA 153 mA 82 82 2200 uF EC4DAW-48S12N 18-74 VDC 12 VDC 0 mA 500 mA 5 mA 144 mA 87 87 1100 uF EC4DAW-48S15N 18-74 VDC 15 VDC 0 mA 400 mA 5 mA 146 mA 87 86 470 uF EC4DAW-48D12N 18-74 VDC ±12 VDC 0 mA ±250 mA 5 mA 144 mA 87 87 660 uF EC4DAW-48D15N 18-74 VDC ±15 VDC 0 mA ±200 mA 5 mA 146 mA 86.5 86 220 uF NOTE: 1. Nominal Input Voltage 24 or 48VDC. 2. Measured at Nominal Input Voltage. 3. Measured at 12VDC for 24Vin, 24VDC for 48Vin. PART NUMBER Series Nominal Input Voltage Number of Outputs Nominal Output Voltage Remote On/Off Logic EC4DAW II O XX Y EC4DAW 24：24 VDC 48：48 VDC S： Single 33： 3.3VDC N： Negative 05： 5.0VDC D： Dual 12： 12VDC 15： 15VDC Part Number Example: EC4DAW-24S12N: 6W, 4:1 9-36Vdc Input, Single 12Vdc Output, Negative Logic
www.cincon.com 2 REVISION: V10 EC4DAW Series TECHNICAL SPECIFICATIONS (All specifications are typical at nominal input, full load at 25℃ unless otherwise noted.) ABSOLUTE MAXIMUM RATINGS PARAMETER NOTES and CONDITIONS Device Min. Typ. Max. Units Input Voltage Continuous 24Vin -0.3 36 Vdc 48Vin -0.3 74 Input Surge Voltage 100ms max. 24Vin 50 Vdc 48Vin 100 Operating Temperature With de-rating, above 61℃ Vo=3.3V -40 105 ℃ Vo=5V With de-rating, above 65℃ Vo=12V Vo=15V Vo=±12V Vo=±15V Maximum Case Temperature At the center part of case plate All 105 ℃ Storage Temperature All -55 125 ℃ INPUT CHARACTERISTICS PARAMETER NOTES and CONDITIONS Device Min. Typ. Max. Units Operating Input Voltage 24Vin 9 24 36 Vdc 48Vin 18 48 74 Maximum Input Current Vin=9V, Full load 24Vin 0.8 A Vin=18V, Full load 48Vin 0.4 No-Load Input Current Vin=24, 48V, Io=0A See Model Number Table mA Input Filter Pi type All Inrush Current (I2t) As per ETS300 132-2 All 0.1 A2s Input Reflected Ripple Current Vin=nominal, L=12uH, C=47uF, Load=full load All 10 mA OUTPUT CHARACTERISTICS PARAMETER NOTES and CONDITIONS Device Min. Typ. Max. Units Voltage Set Point Accuracy Vin=24, 48V, Full load, Tc=25℃ All -1.5 +1.5 % Output Voltage Balance Vin=24, 48V, Full load, Tc=25℃ Dual -1.0 +1.0 % Output Voltage Regulation Load Regulation Full load to no load All ±0.5 % Line Regulation Vin=High line to low line, full load Single ±0.2 Dual ±0.5 Cross Regulation Asymmetrical load 25%/100% Dual ±5.0 % Temperature Coefficient Tc=-40℃ to 85℃ All ±0.03 %/℃ Output Voltage Ripple and Noise (5Hz to 20MHz bandwidth) Peak-to-Peak Full load, Tc=25℃ 1uF ceramic capacitor XXS15N 120 mV Others 100 Output Current Range Vin= 9 to 36V, 18 to 74V See Model Number Table A Over Current Protection Hiccup mode. Auto recovery All 180 % Short Circuit Protection All Continuous, Auto Recovery External Load Capacitance Full load (resistive) See Model Number Table uF EFFICIENCY PARAMETER NOTES and CONDITIONS Device Min. Typ. Max. Units 100% Load Vin=24V, 48V See Model Number Table %
www.cincon.com 3 REVISION: V10 EC4DAW Series DYNAMIC CHARACTERISTICS PARAMETER NOTES and CONDITIONS Device Min. Typ. Max. Units Output Voltage Current Transient Error Band 75% to 100% of I o_max. step load change di/dt=0.1A/us (within 1% Vout nominal) All ±5 % Recovery Time All 250 us Turn-On Delay and Rise Time Full load (Constant resistive load) Turn-On Delay Time, From On/Off Control Von/off to 10%Vo_set, Remote on All 15 ms Turn-On Delay Time, From Input Vin_min. to 10%Vo_set, Power up All 15 ms Output Voltage Rise Time 10%Vo_set to 90%Vo_set All 8 ms ISOLATION CHARACTERISTICS PARAMETER NOTES and CONDITIONS Device Min. Typ. Max. Units Isolation Voltage (100% factory Hi-Pot tested @2sec.)
1 Minute; input to output All 3000 Vdc
Isolation Resistance Input to output All 1000 MΩ Isolation Capacitance Input to output All 500 pF FEATURE CHARACTERISTICS PARAMETER NOTES and CONDITIONS Device Min. Typ. Max. Units Switching Frequency Pulse width modulation (PWM), fixed All 580 KHz On/Off Control, Negative Remote On/Off Logic, Refer to -Vin Pin Logic High (Module Off) Von/off at Ion/off All 2 4 mA Logic Low (Module On) Pin open=on, high impedance All Off Converter Input Current Shutdown input idle current All 2.5 mA GENERAL SPECIFICATIONS PARAMETER NOTES and CONDITIONS Device Min. Typ. Max. Units MTBF Io=100% of Io_max.; MIL-HDBK - 217F_Notice 1, GB, 25°C 24S33 4650 K hours 24S05 4136 24S12 3920 24S15 4382 24D12 3302 24D15 3851 48S33 4675 48S05 4132 48S12 3899 48S15 4671 48D12 3387 48D15 4278 Weight All 6.5 grams Case Material Non-Conductive Black Plastic, UL 94V -0 Potting Material UL 94V-0 Pin Material Base: Copper with Steel Plating:Bright Tin Shock/Vibration MIL-STD-810F Compliant Humidity 95% RH max. Non condensing Altitude 2000m Operating altitude, 12000m Transport altitude Thermal Shock MIL-STD-810F
www.cincon.com 4 REVISION: V10 EC4DAW Series GENERAL SPECIFICATIONS EMC SPECIFICATIONS (External components required, please refer to application note.) EMI Meets EN 55032 (with external filter) Class A ESD Meets EN 61000-4-2 Level 2: Air ±8kV, Contact ±4kV Perf. Criteria A Radiated immunity Meets EN 61000-4-3 Level 2: 80~1000MHz, 3V/m Perf. Criteria A Fast Transient Meets EN 61000-4-4 Level 2: On power input port, ±0.5kV, external input capacitor required Perf. Criteria A Surge Meets EN 61000-4-5 Level 2: Line to earth, ±1kV, Line to line, ±0.5kV, external input capacitor required Perf. Criteria A Conducted immunity Meets EN 61000-4-6 Level 2: 0.15~80MHz, 3V Perf. Criteria A Packaging Information Link Packaging Information CHARACTERISTIC CURVE Power Derating Curve Performance Data -40 61 105 20% 40% 60% 80% 100% 120% -40 -20 0 20 40 60 80 100 Output Power (%) Ambient Temperature (℃) Typical Derating curve for Natural Convection Vo=3.3 & 5V Vo=12 & 15V 50% 60% 70% 80% 90% 100% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Efficincy (%) Current Load (%) EC4DAW-24S33N Eff Vs Io @25 Deg. C 12V 24V 36V 0.4 0.8 1.2 1.6 Power Dissipation (W) Output Power (%) EC4DAW-24S33N Pd Vs Po @25 Deg. C 12V 24V 36V
www.cincon.com 5 REVISION: V10 EC4DAW Series 50% 60% 70% 80% 90% 100% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Efficincy (%) Current Load (%) EC4DAW-24S05N Eff Vs Io @25 Deg. C 12V 24V 36V 0.4 0.8 1.2 1.6 Power Dissipation (W) Output Power (%) EC4DAW-24S05N Pd Vs Po @25 Deg. C 12V 24V 36V 50% 60% 70% 80% 90% 100% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Efficincy (%) Current Load (%) EC4DAW-24S12N Eff Vs Io @25 Deg. C 12V 24V 36V 0.4 0.8 1.2 1.6 Power Dissipation (W) Output Power (%) EC4DAW-24S12N Pd Vs Po @25 Deg. C 12V 24V 36V 50% 60% 70% 80% 90% 100% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Efficincy (%) Current Load (%) EC4DAW-24S15N Eff Vs Io @25 Deg. C 12V 24V 36V 0.4 0.8 1.2 1.6 Power Dissipation (W) Output Power (%) EC4DAW-24S15N Pd Vs Po @25 Deg. C 12V 24V 36V 50% 60% 70% 80% 90% 100% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Efficincy (%) Current Load (%) EC4DAW-24D12N Eff Vs Io @25 Deg. C 12V 24V 36V 0.4 0.8 1.2 1.6 Power Dissipation (W) Output Power (%) EC4DAW-24D12N Pd Vs Po @25 Deg. C 12V 24V 36V
www.cincon.com 6 REVISION: V10 EC4DAW Series 40% 50% 60% 70% 80% 90% 100% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Efficincy (%) Current Load (%) EC4DAW-24D15N Eff Vs Io @25 Deg. C 12V 24V 36V 0.4 0.8 1.2 1.6 Power Dissipation (W) Output Power (%) EC4DAW-24D15N Pd Vs Po @25 Deg. C 12V 24V 36V 50% 60% 70% 80% 90% 100% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Efficincy (%) Current Load (%) EC4DAW-48S33N Eff Vs Io @25 Deg. C 18V 24V 48V 74V 0.4 0.8 1.2 1.6 Power Dissipation (W) Output Power (%) EC4DAW-48S33N Pd Vs Po @25 Deg. C 18V 24V 48V 74V 50% 60% 70% 80% 90% 100% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Efficincy (%) Current Load (%) EC4DAW-48S05N Eff Vs Io @25 Deg. C 18V 24V 48V 74V 0.4 0.8 1.2 1.6 Power Dissipation (W) Output Power (%) EC4DAW-48S05N Pd Vs Po @25 Deg. C 18V 24V 48V 74V 50% 60% 70% 80% 90% 100% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Efficincy (%) Current Load (%) EC4DAW-48S12N Eff Vs Io @25 Deg. C 18V 24V 48V 74V 0.4 0.8 1.2 1.6 Power Dissipation (W) Output Power (%) EC4DAW-48S12N Pd Vs Po @25 Deg. C 18V 24V 48V 74V
www.cincon.com 7 REVISION: V10 EC4DAW Series 50% 60% 70% 80% 90% 100% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Efficincy (%) Current Load (%) EC4DAW-48S15N Eff Vs Io @25 Deg. C 18V 24V 48V 74V 0.4 0.8 1.2 1.6 Power Dissipation (W) Output Power (%) EC4DAW-48S15N Pd Vs Po @25 Deg. C 18V 24V 48V 74V 50% 60% 70% 80% 90% 100% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Efficincy (%) Current Load (%) EC4DAW-48D12N Eff Vs Io @25 Deg. C 18V 24V 48V 74V 0.4 0.8 1.2 1.6 Power Dissipation (W) Output Power (%) EC4DAW-48D12N Pd Vs Po @25 Deg. C 18V 24V 48V 74V 50% 60% 70% 80% 90% 100% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Efficincy (%) Current Load (%) EC4DAW-48D15N Eff Vs Io @25 Deg. C 18V 24V 48V 74V 0.4 0.8 1.2 1.6 Power Dissipation (W) Output Power (%) EC4DAW-48D15N Pd Vs Po @25 Deg. C 18V 24V 48V 74V
sales@cincon.com www.cincon.com