EC103 | DigiCamel IC Datasheet

Online Datasheet

Read EC103 online.

EC103_10 LITTELFUSE | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 10

Technical content

0.8 Amp Sensitive SCRs

0.8 A SCRs

EC103xx & SxSx Series

Description

Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with microAmps of current as furnished by sense coils, proximity switches, and microprocessors. Features & Beneﬁts t3P)4DPNQMJBOU t(MBTToQBTTJWBUFE junctions t7PMUBHFDBQBCJMJUZVQ UP7 t4VSHFDBQBCJMJUZVQUP 20 A Schematic Symbol Main Features Symbol Value Unit IT(RMS) 0.8 A 7DRM7RRM 400 to 600 7 I(5 12 to 500 μA Absolute Maximum Ratings — Sensitive SCRs Symbol Parameter Test Conditions Value Unit IT(RMS) RMS on-state current T C = 75°C 0.8 A I5 "7 Average on-state current T C = 75°C 0.51 A ITSM Peak non-repetitive surge current TJOHMFIBMGDZDMF G TJ (initial) = 25°C 16 A TJOHMFIBMGDZDMF G TJ (initial) = 25°C 20 I2tI 2U7BMVFGPSGVTJOH tp = 8.3 ms 1 .6 A 2s di/dt Critical rate of rise of on-state current G 5J = 110°C 50 A/μs I(. Peak gate current TJ = 110°C 1A P( "7 Average gate power dissipation TJ = 110°C 0.1 W Tstg Storage temperature range -40 to 150 °C TJ Operating junction temperature range -40 to 110 °C

Applications

Typical applications are capacitive discharge systems for strobe lights and gas engine ignition. Also controls for power tools, home/brown goods and white goods appliances. A K G

Revised: March 31, 2010 03:44 PM ©2010 Littelfuse, Inc T eccor® brand Thyristors Speciﬁcations are subject to change without notice. Speciﬁcations are subject to change without notice. Please refer to http://www.littelfuse.com for current information. EC103xx & SxSx Series Electrical Characteristics (TJ = 25°C, unless otherwise speciﬁed) Symbol Test Conditions Value UnitSxS1 EC103X1 SxS2 EC103X2 SxS / 2N6565 EC103X SxS3 EC103X3 I(5 3L = 100 8 MAX. 12 50 200 500 μA 7(5 MAX. 0.8 7 dv/dt 7D 7DRM; R(, = 1kΩ MIN. 20 25 30 40 7çT 7 10 10 15 20 7(% 7D 7DRM; RL = 3.3 k8; TJ = 110°C MIN. 0.2 0.25 7 I) IT = 20mA (initial), R(, = 1kΩ MAX. 5 8 mA tq (1) MAX. 60 50 45 μs tgt I( = 2 x I(5; PW = 15μs; IT = 1 .6A TYP . 2 5 20 30 μs (1) IT=1A; tp EWEU 7T EJEU "T Static Characteristics Symbol Test Conditions Value Unit 7TM IT = 1 .2A; tp = 380 μs MAX. 1 .7 7 IDRM / IRRM 7DRM 7RRM R(, = 1kΩ TJ = 25°C MAX. μATJ = 100°C 50 TJ = 110°C 100 Thermal Resistances Symbol Parameter Value Unit RR(J-C) Junction to case (AC) EC103xy/2N6565 75 °C/W SxSy 60* RR(J-A) Junction to ambient EC103xy/2N6565 160 °C/W Notes: x = voltage, y = sensitivity * = Mounted on 1 cm2 copper (two-ounce) foil surface

165©2010 Littelfuse, Inc Revised: March 31, 2010 03:44 PM T eccor® brand Thyristors Speciﬁcations are subject to change without notice. EC103xx & SxSx Series Figure 1: Normalized DC Gate T rigger Current vs. Junction T emperature Figure 2: Normalized DC Gate T rigger Voltage vs. Junction T emperature 0.0 1.0 2.0 3.0 4.0 -40 -1 5 10 3 5 60 8 5 110 Junction Temperature (TJ) -- (°C) Ratio of IGT/IGT (TJ = 25°C) Figure 5: Power Dissipation (T ypical) vs. RMS On-State Current Figure 6: Maximum Allowable Case T emperature vs. RMS On-State Current Figure 3: Normalized DC Holding Current vs. Junction T emperature Figure 4: On-State Current vs. On-State Voltage (T ypical) 0.0 0.5 1.0 1.5 2.0 -40 -1 5 10 3 5 60 8 5 110 Junction Temperature (TJ) -- (°C) Ratio of VGT / VGT (TJ = 25ºC) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 -40 -1 5 10 3 5 60 8 5 110 Junction Temperature (TJ) -- (°C) Ratio of IH / IH (TJ = 25°C) TJ = 25°C Instantaneous On-state Voltage (v T) – Volts Instantaneous On-state Current (iT) – Amps 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 Average On-State Power Dissipation [PD(AV)] - (Watts) RMS On-State Current [IT(RMS)] - Amps 105 115 RMS On-State Current [IT(RMS)] - Amps Maximum Allowable Case Temperature (TC) - °C CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180°

Revised: March 31, 2010 03:44 PM ©2010 Littelfuse, Inc T eccor® brand Thyristors Speciﬁcations are subject to change without notice. Speciﬁcations are subject to change without notice. Please refer to http://www.littelfuse.com for current information. EC103xx & SxSx Series Figure 7: Maximum Allowable Case T emperature vs. Average On-State Current Figure 8: Maximum Allowable Ambient T emperature vs. RMS On-State Current Figure 9: Maximum Allowable Ambient T emperature vs. Average On-State Current 105 115 Average On-State Current [IT(AVE)] - Amps Maximum Allowable Case Temperature (TC) - °C CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° 100 120 RMS On-State Current [I T(RMS)] - Amps Maximum Allowable Ambient Temperature (TA) - °C CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° FREE AIR RATING 100 120 Average On-State Current [IT(AVE)] - Amps Maximum Allowable Ambient Temperature (TA) - °C CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° FREE AIR RATING Figure 11: Peak Repetitive Sinusoidal Pulse Current Figure 10: Peak Capacitor Discharge Current 100 120 140 160 180 11 0 1 0 0 100 120 140 160 180 11 0 1 0 0

167©2010 Littelfuse, Inc Revised: March 31, 2010 03:44 PM T eccor® brand Thyristors Speciﬁcations are subject to change without notice. EC103xx & SxSx Series 0.1 1.0 10.0 100.0 1 10 100 1000 Surge Current Duration -- Full Cycles Peak Surge (Non-repetitive) On-state Current (ITSM) – Amps Figure 12: Surge Peak On-State Current vs. Number of Cycles Figure 13: Simple T est Circuit for Gate T rigger Voltage and Current 4611-:'3&26&/$:)[4JOVTPJEBM LOAD: Resistive RMS On-State Current: [I T(RMS)]: Maximum Rated 7BMVFBU4QFDJmFE$BTF5FNQFSBUVSF Notes: (BUFDPOUSPMNBZCFMPTUEVSJOHBOEJNNFEJBUFMZ following surge current interval. 2. Overload may not be repeated until junction temperature has returned to steady-state rated value. /PUF77UP7EDNFUFS 7(57UP7EDNFUFS I(N"UPN"EDNJMMJBNNFUFS 3LQPUFOUJPNFUFS To measure gate trigger voltage and current, raise gate WPMUBHF 7(5 VOUJMNFUFSSFBEJOH7ESPQTGSPN7UP7 (BUFUSJHHFSWPMUBHFJTUIFSFBEJOHPO7(5KVTUQSJPSUP7 ESPQQJOH(BUFUSJHHFSDVSSFOU*(5 Can be computed from the relationship 7(5 I(5 = I(- ____ Amps 1000 where I(JTSFBEJOH JOBNQFSFT PONFUFSKVTUQSJPSUP7 dropping Note: I(5 may turn out to be a negative quantity (trigger current ﬂows out from gate lead). If negative current occurs, I (5 value is not a valid reading. Remove 1 k resistor and use I( as the more correct I(5 value. This will occur on 12 μA gate products. Reset Normally-closed Pushbutton 6VDC D.U.T. 100 1 k (1%) 100 IGT IG IN4001 VGT

Revised: March 31, 2010 03:44 PM ©2010 Littelfuse, Inc T eccor® brand Thyristors Speciﬁcations are subject to change without notice. Speciﬁcations are subject to change without notice. Please refer to http://www.littelfuse.com for current information. EC103xx & SxSx Series Soldering Parameters Reﬂow Condition 1Co'SFFBTTFNCMZ Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) oTFDT Average ramp up rate (Liquidus Temp) (TL) to peak 5°C/second max TS(max) to TL - Ramp-up Rate 5°C/second max Reﬂow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) oTFDPOET Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) oTFDPOET Ramp-down Rate 5°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 280°C Physical Speciﬁcations Environmental Speciﬁcations Test Speciﬁcations and Conditions AC Blocking MIL-STD-750, M-1040, Cond A Applied Peak AC voltage @ 110°C for 1008 hours T emperature Cycling MIL-STD-750, M-1051, 100 cycles; -40°C to +150°C; 15-min dwell-time T emperature/ Humidity EIA / JEDEC, JESD22-A101 IPVST 7%$¡$ rel humidity High T emp Storage MIL-STD-750, M-1031, 1008 hours; 150°C Low-T emp Storage 1008 hours; -40°C Thermal Shock MIL-STD-750, M-1056 10 cycles; 0°C to 100°C; 5-min dwell- time at each temperature; 10 sec (max) transfer time between temperature Autoclave EIA / JEDEC, JESD22-A102 168 hours (121°C at 2 ATMs) and Resistance to Solder Heat MIL-STD-750 Method 2031 Solderability ANSI/J-STD-002, category 3, Test A Lead Bend MIL-STD-750, M-2036 Cond E T erminal Finish .BUUF5JOQMBUFE1CGSFF4PMEFS Dipped Body Material 6-SFDPHOJ[FEFQPYZNFFUJOHnBNNBCJMJUZ DMBTTJmDBUJPO7 Lead Material Copper Alloy Design Considerations Careful selection of the correct device for the application’s operating parameters and environment will go a long way UPXBSEFYUFOEJOHUIFPQFSBUJOHMJGFPGUIF5IZSJTUPS(PPE design practice should limit the maximum continuous DVSSFOUUISPVHIUIFNBJOUFSNJOBMTUPPGUIFEFWJDF rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Time Temperature TP TL TS(max) TS(min) tP tL tS time to peak temperature PreheatPreheat Ramp-upRamp-up Ramp-downRamp-do

169©2010 Littelfuse, Inc Revised: March 31, 2010 03:44 PM T eccor® brand Thyristors Speciﬁcations are subject to change without notice. EC103xx & SxSx Series Dimensions – TO-92 (E Package) Dimensions — Compak (C Package) Dimension Inches Millimeters Min Max Min Max A 0.176 4.47 B 0.500 - 12.70 - D 0.105 2.41 2.67 E 0.150 - 3.81 - F 0.046 0.054 1 .16 1 .37 ( 0.135 0.145 3.43 3.68 ) 0.088 2.23 2.44 J 0.176 0.186 4.47 4.73 , 0.088 2.23 2.44 L 0.013 0.33 0.48 M 0.013 0.017 0.33 0.43 All leads insulated from case. Case is electrically nonconductive. A B TC Measuring Point Gate AnodeCathode E H G F D K J L M 0.079 (2.0) 0.040 (1.0) 0.030 (0.76) 0.079 (2.0) 0.079 (2.0) 0.110 (2.8) Pad Outline H KJE F L G A C B M D N P Gate Cathode Anode TC / TL Temperature Measurement Point Dimensions are in inches (and millimeters). Dimension Inches Millimeters Min Max Min Max A 0.130 0.156 3.30 B 0.201 0.220 5.10 5.60 C 0.077 0.087 2.20 D 0.181 4.05 4.60 E 0.030 0.063 0.75 1 .60 F 0.075 2.45 ( 0.002 0.008 0.05 0.20 ) 0.077 0.104 2.65 J 0.043 0.053 1 .35 , 0.006 0.016 0.15 0.41 L 0.030 0.055 0.76 1 .40 M 0.022 0.028 0.56 0.71 N 0.027 0.033 0.84 P 0.052 0.058 1 .32 1 .47

Revised: March 31, 2010 03:44 PM ©2010 Littelfuse, Inc T eccor® brand Thyristors Speciﬁcations are subject to change without notice. Speciﬁcations are subject to change without notice. Please refer to http://www.littelfuse.com for current information. EC103xx & SxSx Series Packing Options Part Number Marking Weight Packing Mode Base Quantity EC103xy / 2N6565 EC103xy / 2N6565 H Bulk 2000 EC103xyRP EC103xy H Reel Pack 2000 EC103xyAP EC103xy H Ammo Pack 2000 SxSyRP SxSy 0.08 g Embossed Carrier 2500 /PUFY 7PMUBHF Z TFOTJUJWJUZ TO-92 (3-lead) Reel Pack (RP) Radial Leaded Speciﬁcations Meets all EIA-468-B 1994 Standards 0.708 (18.0) 1.6 (41.0) 0.5 (12.7) 0.1 (2.54) 0.2 (5.08) 0.236 (6.0) 0.02 (0.5) Direction of Feed Dimensions are in inches (and millimeters). 1.97 (50.0) 14.17(360.0) Flat up 1.26 (32.0) 0.098 (2.5) MAX Cathode Anode Gate 0.354 (9.0) 0.157 DIA (4.0) Product Selector Part Number Voltage Gate Sensitivity Type Package 400V 600V 800V 1000V EC103 x 1 X X 12μA Sensitive SCR 50 EC103 x 2 X X 50μA Sensitive SCR 50 EC103 x X / 2N6565 X 200μA Sensitive SCR 50 EC103 x 3 X X 500μA Sensitive SCR 50 S x S1 X X 12μA Sensitive SCR Compak S x S2 X X 50μA Sensitive SCR Compak S x S X X 200μA Sensitive SCR Compak S x S3 X X 500μA Sensitive SCR Compak /PUFY 7PMUBHF

171©2010 Littelfuse, Inc Revised: March 31, 2010 03:44 PM T eccor® brand Thyristors Speciﬁcations are subject to change without notice. EC103xx & SxSx Series TO-92 (3-lead) Ammo Pack (AP) Radial Leaded Speciﬁcations Compak Embossed Carrier Reel Pack (RP) Speciﬁcations Meets all EIA-468-B 1994 Standards Meets all EIA-481-1 Standards Flat down

25 Devices per fold

(and millimeters). 0.708 (18.0) 1.62 (41.2) 0.5 (12.7) 0.1 (2.54) 0.2 (5.08) 0.236 (6.0) 0.02 (0.5) 1.85 (47.0) 13.3 (338.0) 1.27 (32.2) 0.098 (2.5) MAX 12.2 (310.0) 1.85 (47.0) 0.354 (9.0) 0.157 DIA(4.0) 8.0 Anode Cathode Gate 0.47 (12.0) 0.36 (9.2) 0.315 (8.0) 0.157 (4.0) 0.49 (12.4) 0.512 (13.0) Arbor Hole Dia. 12.99 (330.0) Dimensions are in inches (and millimeters). Direction of Feed 0.059 DIA(1.5) Cover tape

Revised: March 31, 2010 03:44 PM ©2010 Littelfuse, Inc T eccor® brand Thyristors Speciﬁcations are subject to change without notice. Speciﬁcations are subject to change without notice. Please refer to http://www.littelfuse.com for current information. EC103xx & SxSx Series Part Numbering System (TO-92) Part Marking System Part Numbering System (Compak) Part Marking System (Compak) TO-92 (E Package) EC103D1 yxxxx 1 75 DEVICE TYPE EC: TO-92 SCR xx: Lead Form Option CURRENT RATING Lead Form Dimension 103: 0.8A (TO-92) VOLTAGE RATING D: 400V 1: 12 M: 600V SENSITIVITY & TYPE EC 103 D μ μ μA 2: 50 μA A[blank]: 200 3: 500 A 2N: JEDEC (JEDEC) 6565: 400V yxxxx S6S1 Compak (C Package) DEVICE TYPE S: Compak SCR CURRENT RATING S: 0.8A (Compak) VOLTAGE RATING 4: 400V 1: 12 6: 600V SENSITIVITY & TYPE S 6S μ μ μA 2: 50 μA A[blank]: 200 3: 500 A

Product Information

EC103 specifications and overview.

Summary

Sensitive gate SCRs are easily triggered with microAmps of current

Description

Sensitive gate SCRs are easily triggered with microAmps of current

Source title EC103 Datasheet(PDF) - Littelfuse

Related Parts

More parts from the same family.

Browse manufacturer