E901 SENNHEISER | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
PRODUCT SPECIFICATION (V1.1) evolution wired e 901
FEATURES
- Frequency response optimized for kick drum
- Ver y fast attack
- Integrat ed preamp and gold-plated standard XLR plug, no need for special adapter cable
- No microphone stand needed f or kick drum applica- tions, just lay it on a towel or pillow
- Handles ver y high sound pressure levels
- Slip-fr ee, dampening rubber pad underneath DELIVERY INCLUDES
- e 901
- pouch
- quick guide
- safet y guide High-quality pre-polarised condenser microphone with half-cardioid pickup pattern, especially suitable for use with kick drums. The extremely thin, high-strength diaphragm delivers a very low bass response and fast transient signals. Inciden- tal rear noise is effectively rejected. SPECIFICATIONS Transducer principle pre-polarized condenser boundary microphone Frequency response 20 - 20,000 Hz ± 2.5 dB deviation to reference Pick-up pattern half-cardioid Sensitivity -66 dBV/Pa (0.5 mV/Pa) ± 2.5 dB Nominal impedance 50 Ω Min. terminating impedance 1 kΩ Power supply P48 Current consumption 2 mA Connector XLR-3 Dimensions 125 x 105 x 29 mm Weight 515 g ARCHITECT‘S SPECIFICATION The microphone shall be a half-cardioid pre-polarized boundary condenser designed for use with kick drums. It shall have an unobtrusive, flat housing with an extremely rugged, step-resistant sound inlet basket and shall feature a rubber damping plate on the base. The microphone shall have an integrated preamp. The frequency response shall be 20 Hz – 20,000 Hz and the sensitivity (free field, no load) shall be 0.5 mV/Pa at 1 kHz. Nominal impedance shall be less than 50 Ω, with a min. terminating impedance of 1 kΩ. The microphone shall ope- rate on 48 V phantom power and shall provide a gold-pla- ted 3-pin XLR connector. Dimensions shall be 125 x 105 x 29 mm (4.92" x 4.13" x 1.14"). Weight without cable shall be approximately 515 grams (1.13 lbs). The microphone shall be the Sennheiser e 901.
PRODUCT SPECIFICATION (V1.1) evolution wired e 901 Sennheiser electronic SE & Co. KG · Am Labor 1 · 30900 Wedemark · Germany · www.sennheiser.com DIMENSIONS POLAR PATTERN FREQUENCY RESPONSE 125 4.92" 1.14" 3.11" 105 4.13" XLR 3 330° 210° 240° 300° 270° 180° 5 dB/DIV30° 150° 120° 60° 90° 2,000 Hz 4,000 Hz 8,000 Hz 16,000 Hz 125 Hz 250 Hz 500 Hz 1,000 Hz -45 -50 50 100 200 500 1k 2k 5k 10k 20k -55 -60 -65 -70 -75 -80 -85 -90 -95 1 m, 90° 10 cm, 0° 1 m, 180° 1 m , 0° dBV/Pa