E70-24MCW-FR GAMEWELL-FCI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • ADA/NFPA/UFC/ANSI compliant
  • Complies with OSHA 29 Part 1910.165
  • Wall mount models are available with Field Selectable Candela Settings of 15/30/75/110cd or 135/185cd (Multi- Candela models), or 15/75cd (Single Candela model)
  • Ceiling mount models are available with field selectable candela settings of 15/30/75/95cd or 115/177cd (multi- candela models)
  • Strobes produce 1 flash per second over the regulated voltage range
  • 24 VDC with wide UL “Regulated Voltage” using filtered DC or unfiltered V RMS input voltage
  • Synchronize with Cooper-Wheelock SM, DSM or a power supply with built-in Coo- per-Wheelock sync protocol
  • Field selectable taps for 25 or 70 VRMS op- eration from 1/8 watt up to 2 watts
  • High efficiency design for maximum output at minimum wattage across a frequency range of 400 to 4000 HZ
  • Fast installation with IN/OUT screw termi- nals using #12 to #18 AWG wires Listings Listings and approvals below apply to the basic E Series Low Profile Speakers and Speaker Strobes. In some cases, certain modules may not be listed by certain ap- proval agencies, or listing may be in proc- ess. Consult factory for latest listing status.
  • UL Listed: files S2652 (Speakers), S2652/ S5391 (Strobe/Speakers)
  • MEA Listed. file 151-92-E Vol. XXI
  • CSFM approved: files 7320-0785:134, (Speakers), 7125-0785:146 (Strobes/Speakers), 7125-0785:152

Description

Cooper-Wheelock’s Series E Low Profile Speakers and Speaker Strobes are designed for high efficiency sound output, with dual voltage (25/70 VRMS) capability and field selectable taps from 1/8 to 2 watts. The low profile design incorpor ates a speaker mount- ing plate for faster and easier installation. Each model has a built -in level adjustment feature and an aesthetic two (2) screw grille cover. The Series E Speaker Strobe models incor- porate the Low Current draw Series RSS Strobes. Strobe options for wall mount models include 15/75 or Cooper-Wheelock’s patented MCW multi-candela strobe with field selectable can- dela settings of 15/30/75/110cd or the high intensity MCWH strobe with field selectable 135/185cd. Ceiling mount models are available in Coo- per-Wheelock’s patented MCC multi-candela ceiling strobe with field selectable intensities of 15/30/75/95cd or the high intensity MCCH strobe with field selectable 115/177cd. Multi-Candela Indicator (bottom of Strobe Lens) E Low Profile Speakers & Strobes CS-2242 09/01/06 Page 1 of 4 E70 Series Speaker Strobe E90 Series Speaker Strobe Series E Speakers and Speaker Strobes provide high audio output with clear audibility and are designed to meet the critical needs of the life safety industry for effective emergency voice communications, tone signaling and visible signaling to alert the hearing impaired. The strobe portion of all Series E Speak er Strobes may be synchronized when used in conjunction with the Cooper-Wheelock SM, DSM Sync Modules or a power supply with Patented Cooper-Wheelock Sync Protocol. Cooper- Wheelock’s synchronized strobes offer an easy way to comply with ADA recom- mendations concerning photosensitive epilepsy. Series E Speaker Strobes are UL Li sted for indoor use under Standard 1971 (Signaling Devices for the Hearing-Impaired) and Standard 1480 (Speaker Appli- ances), and use a Xenon flashtube with solid state circuitry enclosed in a rugged Lexan® lens to provide maximum reliability for effective visual signaling. All inputs are supervised and employ IN/OUT wiring terminals for fast installation using #12 to #18 AWG wiring. Color options for the E Series Speakers and Speaker Strobes offered are colored red or white.

E Low Profile Speakers & Strobes CS-2242 09/01/06 Page 2 of 4 WARNING: CONTACT COOPER-WHEELOCK FOR THE CURRENT “INSTALLATION IN- STRUCTIONS” AND “GENERAL INFORMA- TION” SHEET (P82380) ON THESE PRODUCTS. THESE DOCUMENTS UNDERGO PERIODIC CHANGES. IT IS IMPORTANT THAT YOU HAVE CURRENT INFORMATION ON THESE PROD- UCTS. THESE MATERIALS CONTAIN IMPOR- TANT INFORMATION THAT SHOULD BE READ PRIOR TO SPECIFYING OR INSTALLING THESE PRODUCTS, INCLUDING:

  • TOTAL CURRENT REQUIRED BY ALL APPLIANCES CONNECTED TO SYSTEM SECONDARY POWER SOURCES.
  • FUSE RATINGS ON NOTIFICATION APPLIANCE CIRCUITS TO HANDLE PEAK CURRENTS FROM ALL APPLIANCES ON THOSE CIRCUITS.
  • COMPOSITE FLASH RATE FROM MULTIPLE STROBES WITHIN A PERSON’S FIELD OF VIEW.
  • ADDING, REPLACING OR CHANGING APPLIANCES OR CHANGING CANDELA SETTINGS WILL AFFECT CURRENT DRAW. RECALCULATE CURRENT DRAW TO ENSURE THAT THE TOTAL AVERAGE CUR- RENT AND TOTAL PEAK REQUIRED BY ALL APPLIANCES DO NOT EXCEED THE RATED CAPACITY OF THE POWER SOURCES OR FUSES.
  • THE VOLTAGE APPLIED TO THESE PRODUCTS MUST BE WITHIN THEIR “REGULATED VOLTAGE RANGE”.
  • INSTALLATION OF 110 CANDELA STROBE PRODUCTS IN SLEEPING AREAS.
  • INSTALLATION IN OFFICE AREAS AND OTHER SPECIFICATION AND INSTALLA- TION ISSUES.
  • USE STROBES ONLY ON CIRCUITS WITH CONTINUOUSLY APPLIED OPERATING VOLTAGE. DO NOT USE STROBES ON CODED OR INTERRUPTED CIRCUITS IN WHICH THE APPLIED VOLTAGE IS CYCLED ON AND OFF AS THE STROBES MAY NOT FLASH.
  • FAILURE TO COMPLY WITH THE INSTALLATION INSTRUCTIONS OR GEN- ERAL INFORMATION SHEETS COULD RE- SULT IN IMPROPER INSTALLATION, APPLI- CATION, AND/OR OPERATION OF THESE PRODUCTS IN AN EMERGENCY SITUA- TION, WHICH COULD RESULT IN PROP- ERTY DAMAGE AND SERIOUS INJURY OR DEATH TO YOU AND/OR OTHERS.
  • CONDUCTOR SIZE (AWG), LENGTH AND AMPACITY SHOULD BE TAKEN INTO CON- SIDERATION PRIOR TO DESIGN AND IN- STALLATION OF THESE PRODUCTS, PAR- TICULARLY IN RETROFIT INSTALLATIONS. General Notes
  • Strobes are designed to flash once per second minimum over their “Regulated Voltage Range”. Note that NFPA-72 specifie s a flash rate of 1 to 2 flashes per second and ADA Guidelines specify a flash rate of 1 to 3 flashes per second.
  • All candela ratings represent min. effective Strobe intensity per UL Standard 1971.
  • Series E Speaker Strobes and Series E Speakers are listed under UL Standard 1971 for indoor use with a temperature range of 32°F to 120°F (0°C to 49°C) and maximum humidity of 85%.
  • “Regulated Voltage Range” is the newest terminology used by UL to iden- tify voltage range. Prior to this cha nge, UL used the term, “Listed Voltage Range”. Engineer’s Specifications The speaker appliances shall be Cooper-Wheelock Series E Speakers and speaker strobe appliances shall be Cooper-Wheelock Series E Speaker Strobes or approved equals. The speakers shall be UL Listed under Standard 1480 for Fire Protective Service and speakers equipped with strobes shall be listed under UL Standard 1971 for Signaling Devices for the Hearing-Impaired. In addition, the strobes shall be certified to meet the requirements of FCC Part 15, Class B. All speakers shall be designed for a field selectable input of either 25 or 70 V RMS, with selectable power taps from 1/8 watt to 2 watts. All models shall have listed sound output of up to 87 dB at 10 feet and a listed frequency response of 400 to 4000 Hz. The speaker shall also incorporat e a sealed back construction. All inputs shall employ terminals that accept #12 to #18 AWG wire sizes. The strobe portion of the appliance shall pr oduce a flash rate of one (1) flash per second over the Regulated Voltage Range and shall incorporate a Xenon flashtube enclosed in a rugged Lexan® lens. The st robe shall be of low current design. Where, Multi-Candela Speaker Strobes are specified, the strobe intensity has field selectable settings and shall be rated per UL Standard 1971 at 15/30/75/110cd or 135/185cd for wall mount and 15/30/75/95cd or 115/177cd for ceiling mount. The selector switch for select ing the candela shall be tamper resistant. The 15/75 can- dela strobe shall be specified when 15 cande la UL Standard 1971 listing with 75 candela on-axis is required (ADA compliance). When synchronization is required, the strobe portion of the appliance shall be com- patible with Cooper-Wheelock’s SM, DSM sync modules or the power supply with built-in Patented Cooper-Wheelock Sync Protocol. The strobes shall not drift out of synchronization at any time during operatio n. If the sync module or Power Supply fails to operate, (i.e., contacts remain closed), the strobe shall revert to a non- The speaker and speaker strobe appliances shall be designed for indoor surface or flush mounting. The speaker and speaker strobe shall incorporate a speaker mounting plate with a grille cover which is secured with two screws for a level, aes- thetic finish and shall mount to standard electrical hardware requiring no additional trimplate or adapter. The finish of the Se ries E speakers and speaker strobes shall be white, red or nickel plate. All speakers and speaker strobe appliances shall be backward compatible. Cooper-Wheelock products must be used within their published specifications and must be PROPERLY specified, applied, inst alled, operated, maintained and opera- tionally tested in accord ance with their installation inst ructions at the time of instal- lation and at least twice a year or more often and in accordance with local, state and federal codes, regulations and laws. S pecification, applicat ion, installation, operation, maintenance and testing must be performed by qualified personnel for proper operation in accordance with all of the latest National Fire Protection Asso- ciation (NFPA), Underwriters’ Laboratories (U L), National Electrical Code (NEC), Occupational Safety and Health Administra tion (OSHA), local, state, county, prov- ince, district, federal and other applicable building and fire standards, guidelines, regulations, laws and codes including, but not limited to, all appendices and amendments and the requirements of the local authority having jurisdiction (AHJ).

SERIES E SPEAKER & STROBE OPERATE INDEPENDENTLY (NON-SYNC OR SYNC) SERIES E SPEAKER STROBES SYNCHRONIZED WITH MULTIPLE DSM MODULES Note: Figure shows interconnection to strobe through sync module. Speaker portion requires 2 separate conductors to FACP. E Low Profile Speakers & Strobes CS-2242 09/01/06 Page 3 of 4 SERIES E SPEAKER STROBE APPLIANCES SYNCHRONIZED WITH DSM MODULE SINGLE CLASS “A” F A C P DSM #3Audible NAC Cir. Strobe NAC Cir. DSM #2 DSM #1 Strobe NAC Cir. Strobe NAC Cir. Audible NAC Cir. Audible NAC Cir. E E E E E E Sync Sync Sync DSM Interconnecting wiring shown. Maximum of twenty (20) DSM + OUT 2 +OUT 1 + IN 1 + IN 2 MINUS 1 MINUS 2 SYNC AUDIBLE STROBE NAC CIRCUIT OUT STROBE NAC CIRCUIT RETURN FACP E E E E E E TO NEXT APPLIANCE OR EOLR FROM PRECEDING APPLIANCE OR VOICE EVACUATION PANEL TO NEXT STROBE OR EOLR FROM PRECEDING STROBE, SYNC MODULE, POWER SUPPLY OR FACP SPEAKERSTROBE + - + -++

Specifications and wiring information are provided for information only and are be- lieved to be accurate. Gamewell-FCI assumes no responsibility for their use. Data and design are subject to change without notice. Installation and wiring instruc- tions shipped with the product shall always be used for actual installation. For more information, contact Gamewell-FCI. Page 4 of 4 E Low Profile Speakers & Strobes CS-2242 09/01/06 NOTE: All CAUTIONS and WARNINGS are identified by the symbol . All warnings are printed in bold capital letters. PLEASE READ THESE SPECIFICATIONS AND ASSOCIATED INSTALLATION INSTRUCTIONS CARE- FULLY BEFORE USING, SPECIFYING OR APPLYING THIS PRODUCT. FAILURE TO COMPLY WITH ANY OF THESE INSTRUC- TIONS, CAUTIONS OR WARNINGS COULD RESULT IN IMPROPER APPLICATION, IN- STALLATION AND/OR OPERATION OF THESE PRODUCTS IN AN EMERGENCY SITUATION, WHICH COULD RESULT IN PROPERTY DAMAGE, AND SERIOUS IN- JURY OR DEATH TO YOU AND/OR OTHERS.

Ordering Information

  • Average RMS Current is per UL average RM S method and Average Mean Current is per UL average mean method. For rate In Rush and Peak current across the UL Listed voltage range for both filtered DC and unfiltered VRMS (FWR), see installation instruc- tions. ** Refer to mounting options data sheet. Gamewell-FCI

12 Clintonville Road

Northford, CT 06472-1610 Phone: 203-484-7161 Fax: 203-484-7118 www.gamewell-fci.com A Honeywell Company © 2006 Gamewell-FCI MO D E L NUM BER IN P UT VOLTAGE (VDC) AVERAGE ME A N CURRENT @ 24 VDC MO U N T I N G OPTIONS SM -1 2/24-R 24 .028 W DSM -1 2/24-R 24 .035 W SYNC M ODELS/POWER SUPPLY SM Sync Module is rated for 3.0 amperes @ 24 VDC. DSM Sync Module is rated for 3.0 amperes per circuit. The maxi- mum number of interconnected DSM modules is twenty (20). Refer to Data Sheet S3000 or Installation Instructions P83123 for SM and P83177 for DSM. UL M EA CSFM FM BFP E70-24MCW-FR 15/30/75/110 X X Red Wall L,O,P,Q,U,Y X X X * X E70-24MCW-FW 15/30/75/110 X X White Wall L,O,P,Q,U,Y X X X * X E70-241575W-FR 15 (75 on Axis) X X Red Wall L,O,P,Q,U,Y X X X * X E70-R - - - Red W all/Ceiling Q,V X X X * X E70-W - - - W hite W all/Ceiling Q,V X X X * X E70-24MCWH-FR 135/185 X X Red Wall L,O,P,Q,U,Y X * * * * E70-24MCWH-FW 135/185 X X White Wall L,O,P,Q,U,Y X * * * * E90-24MCC-FW 15/30/75/95 X X W hite Ceiling Q,V X * X * * E90-W - - - W hite W all/Ceiling Q,V X X X * X E90-R - - - Red W all/Ceiling Q,V X X X * X E90-24MCCH-FW 115/177 X X W hite Ceiling Q,V X * * * * MO D E L STROBE CANDE LA NON- SYNC SYNC W/SM, MO D E L COLOR WALL/ CE I LING MO U N TI N G OPTIONS*** AGE NCY APPROVALS 241575W 15/75cd 15cd 30cd 75cd 110cd 135cd 185cd 15cd 30cd 75cd 95cd 115cd 177cd TABLE 1: AV ERAGE RM S CURRENT* E70/E90 SPEAKER STROBES 24M CW E70 STROBE CURRENT - WALL M OUNT 24M CC 24M CCH E90 STROBE CURRENT - CEILING M OUNT 24M CWH w atts 1/8 1/4 1/2 1 2 TABLE 2: E70/E90 UL REVERBERANT dBA @ 10 Feet dBA ratings based on UL testing under UL Standard 1480