DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 65

Technical content

[ Obsolete product ] Agilent has a new name Keysight Technologies. Keysight Technologies Inc. is the world's leading electronic measurement company, transforming today's measurement experience through innovations in wireless, modular, and software solutions. With its HP and Agilent legacy, Keysight delivers solutions in wireless communications, aerospace and defense and semiconductor markets with world-class platforms, software and consistent measurement science. Alldatasheet.com

E5071C ENA Network Analyzer

  • 9 kHz to 4.5/6.5/8.5 GHz
  • 100 kHz to 4.5/6.5/8.5 GHz (with bias tees)
  • 300 kHz to 14/20 GHz (with bias tees) E5091A Multiport Test Set E5092A Configurable Multiport Test Set Agilent Data Sheet

Corrected System Performance for 75 Ω Measurements with

This document provides technical specifications for the E5071C ENA network analyzer and the E5091A multiport test set. E5071C-230 2-port test set, 9 kHz to 3 GHz without bias tees (Discontinued) E5071C-235 2-port test set, 100 kHz to 3 GHz with bias tees (Discontinued) E5071C-240 2-port test set, 9 kHz to 4.5 GHz without bias tees E5071C-245 2-port test set, 100 kHz to 4.5 GHz with bias tees E5071C-260 2-port test set, 9 kHz to 6.5 GHz without bias tees E5071C-265 2-port test set, 100 kHz to 6.5 GHz with bias tees E5071C-280 2-port test set, 9 kHz to 8.5 GHz without bias tees E5071C-285 2-port test set, 100 kHz to 8.5 GHz with bias tees E5071C-430 4-port test set, 9 kHz to 3 GHz without bias tees (Discontinued) E5071C-435 4-port test set, 100 kHz to 3 GHz with bias tees (Discontinued) E5071C-440 4-port test set, 9 kHz to 4.5 GHz without bias tees E5071C-445 4-port test set, 100 kHz to 4.5 GHz with bias tees E5071C-460 4-port test set, 9 kHz to 6.5 GHz without bias tees E5071C-465 4-port test set, 100 kHz to 6.5 GHz with bias tees E5071C-480 4-port test set, 9 kHz to 8.5 GHz without bias tees E5071C-485 4-port test set, 100 kHz to 8.5 GHz with bias tees E5071C-2D5 2-port test set, 300 kHz to 14 GHz with bias tees E5071C-4D5 4-port test set, 300 kHz to 14 GHz with bias tees E5071C-2K5 2-port test set, 300 kHz to 20 GHz with bias tees E5071C-4K5 4-port test set, 300 kHz to 20 GHz with bias tees E5091A Multiport test set E5092A Configurable multiport test set Calibration kits and ECal modules This E5071C data sheet also provides technical specifications for the following calibration kits and ECal modules. For models not listed in this data sheet, please download the free Uncertainty Calculator from www.agilent.com/find/na_calculator to generate the curves for your calibration kit and enable ENA setup. 85032F Calibration kit 85033E Calibration kit 85052D Calibration kit 85092C Electronic calibration (ECal) module 85093C Electronic calibration (ECal) module N4691B Electronic calibration (ECal) module

Specification (spec.): Warranted performance. All specifications apply at 23 ºC (± 5 ºC), unless otherwise stated, and 90 minutes after the instrument has been turned on. Specifications include guard bands to account for the expected statistical performance distribution, measurement uncertainties, and changes in performance due to environmental conditions. Supplemental information is intended to provide information that is helpful for using the instrument but that is not guaranteed by the product warranty. Typical (typ.): Describes performance that will be met by a minimum of 80% of all products. It is not guaranteed by the product warranty. Supplemental performance data (SPD): Supplemental performance data represents the value of a parameter that is most likely to occur; the expected mean or average. It is not guaranteed by the product warranty. General characteristics: A general, descriptive term that does not imply a level of performance. Boundary Conditions In this data sheet, boundary conditions are given for the specifications. For example, system dynamic range is 98 dB with the following boundary conditions. Option: 485 Frequency: 10 MHz IF bandwidth: 3 kHz If the same boundary conditions fall under more than one category in a table, apply the best value.

  • No averaging applied to data
  • Environmental temperature of 23 °C (±5 °C) with less than 1 °C deviation from the calibration temperature
  • Response and isolation calibration performed System dynamic range

Table 1. Option 230/235/240/245/260/265/280/285/430/435/440/445/

10 MHz to 6 GHz 98 dB

10 MHz to 6 GHz IF bandwidth = 10 Hz 123 dB 130 dB

6 GHz to 7 GHz 117 dB 128 dB

7 GHz to 8 GHz 117 dB 126 dB

Figure 1. System dynamic range (specification and actual measurement data example,

  1. The test port dynamic range is calculated as the difference between the test port rms noise fl oor

uncertainty and interfering signals into account.

  1. The specifi cation might not be met at 5 MHz or 50 MHz.

Table 2. Option 2D5/2K5/4D5/4K5

1 MHz to 10 MHz 82 dB

10 MHz to 100 MHz 95 dB

100 MHz to 6 GHz 98 dB

10.5 GHz to 15 GHz 75 dB

15 GHz to 20 GHz 71 dB

1 MHz to 10 MHz 107 dB 115 dB

10 MHz to 100 MHz 120 dB 129 dB

100 MHz to 6 GHz 123 dB 130 dB

6 GHz to 8 GHz 117 dB 129 dB

10.5 GHz to 15 GHz 100 dB 111 dB

15 GHz to 20 GHz 96 dB 105 dB

Figure 2. System dynamic range (specification and actual measurement data example,

  1. The test port dynamic range is calculated as the difference between the test port’s rms noise

uncertainty and interfering signals into account.

  1. The specifi cation might not be met at 5 MHz or 50 MHz.

Corrected system performance with calibration kit Option 230/235/240/245/260/265/280/285/430/435/440/445/460/465/480/485 Table 3. Corrected system performance with type-N device connectors,

Description

Specifi cation (dB) 9 kHz to 300 kHz 300 kHz to

10 MHz

10 MHz to

3 GHz

3 GHz to

6 GHz

6 GHz to

8.5 GHz

Directivity 49 49 46 40 38 Source match 41 41 40 36 35 Load match 49 49 46 40 37 Transmission uncertainty (specification) Reflection uncertainty (specification) S11 = S22 = 0; Cal power = -10 dBm; Meas power = -10 dBm Magnitude Transmission coefficient (dB) 0.1 0.01 Uncertainty (dB)

9 KHz to 300 KHz

300 KHz to 10 MHz

10 MHz to 3 GHz

3 GHz to 6 GHz

6 GHz to 8.5 GHz 0.1 100 S11 = S22 = 0; Cal power = -10 dBm; Meas power = -10 dBm 6 GHz to 8.5 GHz Transmission coefficient (dB) Uncertainty (degrees) Phase Reflection coefficient (linear) Uncertainty (linear) Magnitude 0.01 0.02 0.03 0.04 0.05 0 0.2 0.4 0.6 0.8 1

9 KHz to 300 KHz, 300 KHz to 10 MHz

6 GHz to 8.5 GHz S21 = S12 = 0; Cal power = -10 dBm; Meas power = -10 dBm Reflection coefficient (linear) Uncertainty (degrees) Phase 0 0.2 0.4 0.6 0.8 1 S21 = S12 = 0; Cal power = -10 dBm; Meas power = -10 dBm 6 GHz to 8.5 GHz

Table 4. Corrected system performance with type-N device connectors, Specifi cation (dB) 300 kHz to Refl ection tracking ±0.100 ±0.040 ±0.060 ±0.070 Transmission tracking ±0.055 ±0.039 ±0.068 ±0.136 Transmission uncertainty (specification) Reflection uncertainty (specification) 0.01 0.1 Uncertainty (dB) Transmission coefficient (dB) Magnitude 6G H zt o8 . 5G H z S 11 = S 22 = 0 ; Cal power = -10 dBm; Meas power = -10 dBm 0.1 100 Uncertainty (degrees) Transmission coefficient (dB) Phase 300 kHz to 10 MHz 6G H zt o8 . 5G H z S 11 = S 22 = 0 ; Cal power = -10 dBm; Meas power = -10 dBm 0.01 0.02 0.03 0.04 0.05 0 0.2 0.4 0.6 0.8 1 Uncertainty (linear) Reflection coefficient (linear) Magnitude 3 0 0k H zt o1 0M H z 6 GHz to 8.5 GHz S 2 1 = S 1 2 = 0 ; Cal power = -10 dBm; Meas power = -10 dBm 0 0.2 0.4 0.6 0.8 1 Reflection coefficient (linear) Phase 300 kHz to 10 MHz 6 GHz to 8.5 GHz Uncertainty (linear) S 2 1 = S 1 2 = 0 ; Cal power = -10 dBm; Meas power = -10 dBm

Table 5. Corrected system performance with 3.5 mm device connector type, Specifi cation (dB) 9 kHz to 300 kHz 300 kHz to Directivity 46 46 44 38 38 Source match 43 43 40 37 36 Load match 46 46 44 38 38 Transmission uncertainty (specification) Reflection uncertainty (specification) Transmission coefficient (dB) Uncertainty (dB) Magnitude 0.01 0.1 S11 = S22 = 0; Cal power = -10 dBm; Meas power = -10 dBm 6 GHz to 8.5 GHz 0.1 100 S11 = S22 = 0; Cal power = -10 dBm; Meas power = -10 dBm 6 GHz to 8.5 GHz Transmission coefficient (dB) Uncertainty (degrees) Phase Reflection coefficient (linear) Uncertainty (linear) Magnitude 0.01 0.02 0.03 0.04 0.05 0 0.2 0.4 0.6 0.8 1 S21 = S12 = 0; Cal power = -10 dBm; Meas power = -10 dBm 6 GHz to 8.5 GHz Reflection coefficient (linear) Uncertainty (degrees) Phase 0 0.2 0.4 0.6 0.8 1 S21 = S12 = 0; Cal power = -10 dBm; Meas power = -10 dBm 6 GHz to 8.5 GHz

Table 6. Corrected system performance with 3.5 mm device connector type, Specifi cation (dB) 300 kHz to Refl ection tracking ±0.100 ±0.040 ±0.050 ±0.070 Transmission tracking ±0.055 ±0.049 ±0.068 ±0.117 Transmission uncertainty (specification) Reflection uncertainty (specification) 0.01 0.1 Uncertainty (dB) Transmission coefficient (dB) Magnitude 6G H zt o8 . 5G H z S 11 = S 22 = 0 ; Cal power = -10 dBm; Meas power = -10 dBm 0.1 100 Uncertainty (degrees) Transmission coefficient (dB) Phase 300 kHz to 10 MHz 1 0M H zt o3G H z 6G H zt o8 . 5G H z S 11 = S 22 = 0 ; Cal power = -10 dBm; Meas power = -10 dBm 0.01 0.02 0.03 0.04 0.05 0 0.2 0.4 0.6 0.8 1 Uncertainty (linear) Reflection coefficient (linear) Magnitude 300 kHz to 10 MHz 6G H zt o8 . 5G H z S 2 1 = S 1 2 = 0 ; Cal power = -10 dBm; Meas power = -10 dBm 0 0.2 0.4 0.6 0.8 1 Uncertainty (degrees) Reflection coefficient (linear) Phase 300 kHz to 10 MHz 6 GHz to 8.5 GHz S 2 1 = S 1 2 = 0 ; Cal power = -10 dBm; Meas power = -10 dBm

Table 7. Corrected system performance with 3.5 mm device connectors, Specifi cation (dB) 300 kHz to

500 MHz

500 MHz to

2 GHz

2 GHz to

20 GHz

Refl ection tracking ±0.003 ±0.003 ±0.004 ±0.008 Transmission tracking ±0.068 ±0.034 ±0.100 ±0.208 Transmission uncertainty (specification) Reflection uncertainty (specification) 0.01 0.1

300 KHz to 500 MHz

2 GHz to 6 GHz

S11 = S22 = 0; Cal power= -10 dBm; Meas power= -10 dBm Uncertainty (dB) Transmission Coefficient (dB) Magnitude 0.1 100

500 MHz to 2 GHz

S11 = S22 = 0; Cal power= -10 dBm; Meas power= -10 dBm Phase Uncertainty (Degrees) Transmission Coefficient (dB ) 0.01 0.02 0.03 0.04 0.05 0 0.2 0.4 0.6 0.8 1 Uncertainty (linear) Reflection coefficient (linear) Magnitude

300 KHz to 500 MHz, 500 MHz to 2 GHz

S 2 1 = S 1 2 = 0 ; Cal power = -10 dBm; Meas power = -10 dBm 0 0.2 0.4 0.6 0.8 1 Uncertainty (degrees) Reflection coefficient (linear) Phase S 2 1 = S 1 2 = 0 ; Cal power = -10 dBm; Meas power = -10 dBm

Table 8. Corrected system performance with 3.5 mm device connectors, Specifi cation (dB) Refl ection tracking ±0.050 ±0.020 ±0.030 ±0.040 Transmission tracking ±0.087 ±0.086 ±0.097 ±0.130 Transmission uncertainty (specification) Reflection uncertainty (specification) 0.01 0.1

10 MHz to 500 MHz

Uncertainty (dB) Transmission Coefficient (dB) Magnitude S 11 = S 22 = 0 ; Cal power = -10 dBm; Meas power = -10dBm 0.1 100 Uncertainty (Degrees) Transmission Coefficient (dB) Phase S 11 = S 22 = 0 ; Cal power = -10 dBm; Meas power = -10dBm 0.01 0.02 0.03 0.04 0.05 0 0.2 0.4 0.6 0.8 1 Uncertainty (linear) Reflection coefficient (linear) Magnitude S 2 1 = S 1 2 = 0 ; Cal power = -10 dBm; Meas power = -10 dBm 0 0.2 0.4 0.6 0.8 1 Uncertainty (degrees) Reflection coefficient (linear) Phase S 2 1 = S 1 2 = 0 ; Cal power = -10 dBm; Meas power = -10 dBm

Uncorrected System Performance Table 9. Option 230/235/240/245/260/265/280/285/430/435/440/445/ Specifi cation (dB) 9 kHz to 300 kHz 300 kHz to to 8.5 GHz Directivity 20 dB 25 dB 20 dB 15 dB Source match 20 dB 25 dB 20 dB 15 dB Load match 12 dB 17 dB 12 dB 10 dB Transmission tracking ±1.5 dB ±1.0 dB ±1.0 dB ±1.0 dB Refl ection tracking ±1.5 dB ±1.0 dB ±1.0 dB ±1.0 dB Table 10. Option 2D5/2K5/4D5/4K5 Specifi cation (dB) 300 kHz to 1 MHz

1 MHz to

1 GHz

1 GHz to

8.5 GHz to

11 GHz

11 GHz to

Directivity 20 dB 25 dB 25 dB 20 dB 15 dB 15 dB 15 dB Source match 20 dB 25 dB 25 dB 20 dB 15 dB 15 dB 15 dB Load match 9 dB 17 dB 15 dB 11 dB 9 dB 8 dB 7 dB Transmission tracking Refl ection tracking

Table 11. Option 230/235/240/245/260/265/280/285/430/435/440/

Table 12. Option 230/235/240/245/260/265/280/285/430/435/440/

50 MHz absolute)

5 GHz to 6 GHz

6 GHz to 7 GHz

  1. Source output performance on port 1 only. Other port output performance is typical.
  2. Level accuracy is taken at 0 dBm, relative to 50 MHz reference unless otherwise stated.
  3. Level linearity given is relative to 0 dBm.
  4. The specifi cation might not be met at 5 MHz or 50 MHz.
  5. The level accuracy specifi cation needs to be taken into account for test port output power level.
  6. Power calibration using an external power meter improves level accuracy of the test port output power.

Proper power meters/sensors, and the 82357B USB-GPIB interface are required to conduct power calibration.

Table 13. Option 2D5/2K5/4D5/4K5

1 MHz to 5 MHz

8.5 GHz to 20 GHz

1 MHz to 6 GHz

6 GHz to 8 GHz

10.5 GHz to 15 GHz

15 GHz to 20 GHz

  1. Level accuracy is taken at –5 dBm, relative to 50 MHz reference unless otherwise stated.
  2. Level accuracy is taken at –5 dBm, relative to 50 MHz reference.
  3. Level linearity given is relative to –5 dBm.
  4. The sweep range shifts based on the selected source attenuator value (0 dB to 60 dB, 10 dB step).
  5. The level accuracy specifi cation needs to be taken into account for test port output power level.
  6. Power calibration using an external power meter improves level accuracy of the test port output power.

Proper power meters/sensors, and the 82357B USB-GPIB interface are required to conduct power calibration.

  1. Source output performance on port 1 only. Other port output performance is typical.

1 MHz to 10 GHz

10 GHz to 13 GHz

13 GHz to 15 GHz

15 GHz to 18 GHz

18 GHz to 20 GHz

Table 14. Option 230/235/240/245/260/265/280/285/430/435/440/ Table 15. Option 2D5/2K5/4D5/4K5

1 GHz to 20 GHz

  1. This includes 6th and 7th harmonics when the test frequency is from 1 MHz to 1 GHz.

1/8th spurious is excluded from 8.76 GHz to 17.52 GHz.

  1. The level accuracy specifi cation needs to be taken into account for test port output power level.
  2. Power calibration using an external power meter improves level accuracy of the test port output power.

Proper power meters/sensors, and the 82357B USB-GPIB interface are required to conduct power calibration.

  1. Maximum output power is the maximum power of "Range" in Table 13 Test port output power.
  2. Source output performance on port 1 only. Other port output performance is typical.

Table 16. Option 230/235/240/245/260/265/280/285/430/435/440/

10 MHz to 5 GHz

7 GHz to 8 GHz

  1. The specifi cation might not be met at 5 MHz or 50 MHz.

Table 17. Option 2D5/2K5/4D5/4K5

5 MHz to 10 MHz

10 MHz to 45 MHz

45 MHz to 4 GHz

4 GHz to 6 GHz

8.5 GHz to 15 GHz

1 MHz to 10 MHz

10 MHz to 100 MHz

  1. The specifi cation might not be met at 5 MHz or 50 MHz.

Table 18. Option 230/235/240/245/260/265/280/285/430/435/440/

3 GHz to 5 GHz

4.38 GHz to 5 GHz (IFBW = 70 kHz)

5 GHz to 6 GHz (IFBW = 70 kHz)

6 GHz to 7 GHz (IFBW = 70 kHz)

  1. The specifi cation might not be met at the following frequencies: 333.333 kHz, 406.25 kHz,
  2. The specifi cation might not be met at 5 MHz or 50 MHz.

Table 19. Option 2D5/2K5/4D5/4K5

10 MHz to 10 GHz

10 GHz to 15 GHz

5 GHz to 10 GHz

1 MHz to 10 MHz (IFBW = 3 kHz)

13.137 GHz to 17 GHz (IFBW = 70 kHz)

17 GHz to 20 GHz (IFBW = 70 kHz)

  1. The specifi cation might not be met at the following frequencies: 406.25 kHz, 666.667 kHz,
  2. The specifi cation might not be met at 5 MHz or 50 MHz.
  3. Trace noise SPD is defi ned with transmission measurements only.

Table 20. Option 230/235/240/245/260/265/280/285/430/435/440/ Table 21. Option 2D5/2K5/4D5/4K5

6 GHz to 20 GHz

  1. Stability is defi ned as a ratio measurement at the test port.

Table 22. Option 230/235/240/245/260/265/280/285/430/435/440/

Table 23. Option 2D5/2K5/4D5/4K5

Table 24. Option 230/235/240/245/260/265/280/285/430/435/440/ within the minimum aperture. calibration and a 10 Hz IF bandwidth. Calibration kit (85032F). Insertion loss is assumed to be < 2 dB. the frequency span and the number of points per sweep).

Table 25. Option 2D5/2K5/4D5/4K5 within the minimum aperture. 2-port calibration and a 10 Hz IF bandwidth. Calibration kit (85052D). Insertion loss is assumed to be < 2 dB.

  1. Group delay is computed by measuring the phase change within a specified step (determined by

the frequency span and the number of points per sweep).

Table 26. System bandwidth Table 27. Front panel information green or red are not regarded as failure.

Table 28. Rear panel information

Table 28. Rear panel information (continued)

264 VAC (automatically

Table 29. LXI compliance

  1. USB Test and Measurement Class (TMC) interface that communicates over USB, complying with

the IEEE 488.1 and IEEE 488.2 standards.

  1. A third-wire ground is required.

Table 30. EMC, safety and environment this electrical/electronic product in domestic household waste. and Control instrumentation” product. Do not dispose in domestic household waste. see www.agilent.com/environment/product/ for more information.

Table 31. Analyzer environmental specifications and dimensions

Table 32. Option 230/235/240/245/260/265/280/285/430/435/440/445/

  1. Supplemental performance data.
  2. Measured with fi rmware version A.09.30.

Table 33. Option 230/235/240/245/260/265/280/285/430/435/440/445/

  1. Supplemental performance data.
  2. Measured with fi rmware version A.09.30.

Table 34. Option 230/235/240/245/260/265/280/285/430/435/440/445/

  1. Supplemental performance data.
  2. Measured with fi rmware version A.09.30.

Table 35. Option 2D5/2K5/4D5/4K5

  1. Supplemental performance data.
  2. Measured with fi rmware version A.09.30.

Table 35. Option 2D5/2K5/4D5/4K5 (continued)

Table 36. Option 2D5/2K5/4D5/4K5

  1. Supplemental performance data.
  2. Measured with fi rmware version A.09.30.

Table 36. Option 2D5/2K5/4D5/4K5 (continued)

Table 37. Option 2D5/2K5/4D5/4K5

  1. Supplemental performance data.
  2. Measured with fi rmware version A.09.30.

Table 37. Option 2D5/2K5/4D5/4K5 (continued)

Table 38. Option 230/235/240/245/260/265/280/285/430/435/440/445/ Table 39. Option 2D5/2K5/4D5/4K5

  1. Supplemental performance data.
  2. Measured with fi rmware version A.09.30.

Table 40. All options

4 G 20000 13 10 G 20000 11

4 G 15000 16 10 G 15000 14

4 G 10000 23 10 G 10000 21

4 G 7000 31 10 G 7000 29

4 G 5000 42 10 G 5000 40

4 G 4000 52 10 G 4000 50

4 G 3000 68 10 G 3000 66

4 G 2000 100 10 G 2000 98

4 G 1500 133 10 G 1500 132

4 G 1000 198 10 G 1000 196

4 G 700 278 10 G 700 276

4 G 500 391 10 G 500 389

4 G 400 487 10 G 400 485

4 G 300 648 10 G 300 646

4 G 200 970 10 G 200 968

4 G 150 1291 10 G 150 1289

4 G 100 1935 10 G 100 1933

4 G 70 2739 10 G 70 2739

4 G 50 3864 10 G 50 3869

4 G 40 4829 10 G 40 4837

4 G 30 6437 10 G 30 6449

4 G 20 9653 10 G 20 9671

4 G 15 12870 10 G 15 12892

4 G 10 19302 10 G 10 19330

  1. Supplemental performance data.
  2. Measured with fi rmware version A.09.30.

Table 41. All options

  1. Supplemental performance data.
  2. Measured with fi rmware version A.09.30.
  3. Measured using a VEE Pro 7.0 program running on a 3.2 GHz Pentium 4 DELL Precision 370,

11 data, using :CALC{1-36}:DATA:FDAT?.

  1. Measured using an E5071C VBA macro running inside the analyzer. Transferred complex S 11 data.

The section provides port performance of test set without calibration. Table 42. Test set input/output performance Table 43. Option E5091A-009 port performance

Table 44. Option E5091A-016 port performance Table 45. Front panel information Table 46. Rear panel information

  1. A third-wire ground is required.

Figure 15. Block diagram

The section provides test input/output performance without calibration by the E5071C. Table 48. Test set input/output performance Table 49. Option E5092A-020 port performance

50 MHz to 2 GHz

2 GHz to 4 GHz

4 GHz to 8 GHz

8 GHz to 10 GHz

10 GHz to 18 GHz

2 GHz to 3 GHz

3 GHz to 8 GHz

50 MHz to 3 GHz

3 GHz to 10 GHz

10 GHz to 16 GHz

16 GHz to 18 GHz

  1. SPDT: Single-pole-double-throw switches. Applies to SW5, SW6, SW7, SW8, SW9 and SW10 in the E5092A. (See Figure 20.)
  2. SP4T: Single-pole-four-throw switches. Applies to SW1, SW2, SW3 and SW4 in the E5092A. (See Figure 20.)

10 GHz to 20 GHz

1.3 GHz to 4 GHz

50 MHz to 100 MHz

100 MHz to 2 GHz

3 GHz to 4 GHz

10 GHz to 14 GHz

14 GHz to 18 GHz

50 MHz to 6 GHz

50 MHz to 500 MHz

500 MHz to 1 GHz

1 GHz to 2 GHz

6 GHz to 10 GHz

Table 49. Option E5092A-020 port performance (continued)

  1. SPDT: Single-pole-double-throw switches. Applies to SW5, SW6, SW7, SW8, SW9 and SW10 in the E5092A. (See Figure 20.)
  2. SP4T: Single-pole-four-throw switches. Applies to SW1, SW2, SW3 and SW4 in the E5092A. (See Figure 20.)
  3. This specifi cation is defi ned when all ports are terminated with a 50 ohm load.

Table 50. Control line Table 51. DC source

1 M ohm load impedance

Table 52. Operating storage environment Table 53. Non-operating storage environment

  1. Input voltage will be clipped at about ±5.2 V when over this range.
  2. The output voltage can be set in this range.
  3. The output voltage resolution becomes effective between 0 V to 5.2 V.

Table 54. Front panel information Table 55. Rear panel information Table 56. Test set dimensions and block diagram Figure 16. Dimensions (front view, with Option E5092A-020, in millimeters, nominal)

  1. 1A third-wire ground is required.

Figure 22. Control line pin assignment (E5092A-020)

Table 55. Corrected system performance with type-N 75 Ω device connectors,

0.01 Mag (dB)

0.1 Phase (deg)

www.agilent.com/find/emailupdates Get the latest information on the products and applications you select. www.agilent.com/find/agilentdirect Quickly choose and use your test equipment solutions with confidence. Agilent Email Updates Agilent Direct www.lxistandard.org LXI is the LAN-based successor to GPIB, providing faster, more efficient connectivity. Agilent is a founding member of the LXI consortium. Remove all doubt Our repair and calibration services will get your equipment back to you, performing like new, when promised. You will get full value out of your Agilent equipment through- out its lifetime. Your equipment will be serviced by Agilent-trained technicians using the latest factory calibration procedures, automated repair diagnostics and genuine parts. You will always have the utmost confidence in your measurements. For information regarding self main- tenance of this product, please contact your Agilent office. Agilent offers a wide range of additional expert test and measurement services for your equipment, including initial start-up assistance, onsite education and training, as well as design, system integration, and project management. For more information on repair and calibration services, go to: www.agilent.com/find/removealldoubt For more information on Agilent Technologies’ products, applications or services, please contact your local Agi- lent office. The complete list is available at: www.agilent.com/find/contactus Americas Canada (877) 894-4414 Latin America 305 269 7500 United States (800) 829-4444 Asia Pacific Australia 1 800 629 485 China 800 810 0189 Hong Kong 800 938 693 India 1 800 112 929 Japan 0120 (421) 345 Korea 080 769 0800 Malaysia 1 800 888 848 Singapore 1 800 375 8100 Taiwan 0800 047 866 Thailand 1 800 226 008 Europe & Middle East Austria 01 36027 71571 Belgium 32 (0) 2 404 93 40 Denmark 45 70 13 15 15 Finland 358 (0) 10 855 2100 France 0825 010 700* *0.125 €/minute Germany 07031 464 6333 Ireland 1890 924 204 Israel 972-3-9288-504/544 Italy 39 02 92 60 8484 Netherlands 31 (0) 20 547 2111 Spain 34 (91) 631 3300 Sweden 0200-88 22 55 Switzerland 0800 80 53 53 United Kingdom 44 (0) 118 9276201 Other European Countries: www.agilent.com/find/contactus Revised: March 24, 2009 Product specifications and descriptions in this document subject to change without notice. © Agilent Technologies, Inc. 2007-2009 Printed in USA, July 30, 2009 5989-5479EN www.agilent.com www.agilent.com/find/ena