E505794 ETC2 | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Features
Single chip ASIC design for compact integration Supports both USB and RS232 interfaces with autodetection Serial Interface: bidirectional communication as a DCE 9,600 and 19,200 baud rates supported Frame configuration 8 data, 1 stop, No Parity, Full Duplex Software or hardware handshaking supported: XON/XOFF; DSR, DTR, RTS, CTS USB Interface: Full speed USB device Self-powered Supports both Five and Four wire touchscreens with autodetection Resolution: 4096x4096, size independent Conversion time approximately 10 ms per coordinate set Improved measurement algorithm eliminates the need for touch filter adjustments Full AccuTouch SmartSet protocol. Multiple output formats: Binary or ASCII E261-280, E271-140, E281A-4002 compatibility modes On-board calibration, coordinate scaling, and programmable output rates allow for application-specific performance tuning Configuration parameters including serial number are storable in off-chip NVRAM (EEPROM) Power requirements: 5 VDC, nominal (4.00 min, 5.25 max); 30 mA, typical 64-pin LQFP package (12 mm x 12 mm x 1.6 mm) Temperature: Operating: -20°C to +85°C Storage: -40°C to +125°C ESD rating (human body model): 2.0 kV Look up product statement of compliance by part number Print Page Worldwide eCommerce Sign In © Elo Touch Solutions, Inc. All rights reserved. Privacy Policy Products Solutions Technologies Support How To Buy Partners About Elo Resources