E50-W

E50-R GAMEWELL-FCI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

Features

 Meets UL Standards 1971 and 1480 (model dependent).  ADA/NFPA/ANSI compliant.  Complies with OSHA 29 Part 1910.165.  Wall mount speaker strobe models with field selectable candela settings of 15/30/75/110cd or 135/185cd (Multi- candela models) or 15/75cd (single candela model).  Field selectable taps for 25 or 70 VRMS operation from 1/8 watt up to 2 watts.  High efficiency design for maximum output at minimum wattage across a frequency range of 400 to 4000 Hz.  24 VDC strobes produce 1 flash per second with wide UL “Regulated Voltage” of 16 to 33 volts using filtered DC or unfiltered VRMS input voltage.  Synchronize with the Cooper-Wheelock SM and DSM.  Mount to 4” square x 2-1/8” (10.2 x 5.5 cm) deep backbox with no extension ring required.  Snap on grille cover with no visible mounting screws.  Fast installation with IN/OUT screw terminals using 12 to 18 AWG wires. E50 SpeakerE50 Speaker Strobe An ISO 9000-2000 Company APPROVED FM SIGNALING S5391 7125-0785:165 7320-0785:166

12 Clintonville Road, Northford, CT 06472-1610 USA  Tel: (203) 484-7161  Fax: (203) 484-7118

9021-60127 Rev. A page 2 of 3 www.gamewell-fci.com NOTE: All CAUTIONS and WARNINGS are identified by the WARNING symbol. All warnings are printed in bold capital letters. WARNING: PLEASE READ THESE SPECIFI- CATIONS AND ASSOCIATED INSTALLATION INSTRUCTIONS CAREFULLY BEFORE USING, SPECIFYING OR APPLYING THIS PRODUCT. VISIT WWW.COOPERWHEELOCK.COM OR CONTACT COOPER-WHEELOCK FOR THE CURRENT INSTALLA- TION INSTRUCTIONS. FAILURE TO COMPLY WITH ANY OF THESE INSTRUCTIONS, CAUTIONS OR WARNINGS COULD RESULT IN IMPROPER APPLICATION, INSTAL- LATION AND/OR OPERATION OF THESE PRODUCTS IN AN EMERGENCY SITUATION, WHICH COULD RESULT IN PROPERTY DAMAGE, AND SERIOUS INJURY OR DEATH TO YOU AND/OR OTHERS. General Notes:  Strobes are designed to flash at 1 flash per second min- imum over their “Regulated Voltage Range”. Note that NFPA-72 specifies a flash rate of 1 to 2 flashes per second and ADA Guidelines specify a flash rate of 1 to 3 flashes per second.  All candela ratings represent minimum effective Strobe intensity based on UL Standard 1971.  Series NS Strobe products are listed under UL Standard 1971 for indoor use with a temperature range of 32°F to 120°F (0°C to 49°C) and max. humidity of 93% (± 2%).  “Regulated Voltage Range” is the newest terminology used by UL to identify the voltage range. Prior to this change, UL used the terminology “Listed Voltage Range”. * RMS current ratings are per UL average RMS method. UL max current rating is the maximum RMS current within the listed voltage range (16-33v for 24v units). For strobes the UL max current is usually at the minimum listed voltage (16v for 24v units). For unfiltered FWR ratings, see installa- tion instructions. dBA ratings are based on UL testing under UL Standard 1480. Architect and Engineer Specifications The speaker appliances shall be Cooper-Wheelock Series E50 Speakers and the speaker strobe appliances shall be Cooper-Wheelock Series E50 Speaker Strobes or approved equals. The speakers shall be UL Listed under Standard 1480 for Fire Protective Service and speakers equipped with strobes shall be listed under UL Standard 1971 for Emergency Devices for the Hearing-Impaired. In addition, the strobes shall be certified to meet the require- ments of FCC Part 15, Class B. All speakers shall be designed for a field selectable input of either 25 or 70 VRMS, with selectable power taps from 1/8 watt to 2 watts. All models shall have listed sound output of up to 89 dBA at 10 feet and a listed frequency response of 400 to 4000 Hz. The speaker shall incorporate a sealed back construction. All inputs shall employ terminals that accept 12 to 18 AWG wire sizes. The strobe portion of the appliance shall produce a flash rate of one (1) flash per second over the regulated voltage range and shall be of low current design. Where Multi Candela Speaker Strobes are specified, the strobe intensity shall have field select- able settings and shall be rated per UL Standard 1971 at 15/30/75/110cd or 135/185cd for wall mounting. The selec- tor switch for selecting the candela shall be tamper resis- tant. The 15/75 candela strobe shall be specified when 15 candela UL Standard 1971 Listing with 75 candela -on-axis is required. When synchronization is required, the strobe portion of the appliance shall be compatible with the Cooper-Wheelock’s SM-12/24-R and/or DSM-12/24-R modules. The strobes shall not drift out of synchronization at any time during operation. If the sync modules or power supply fails to operate, (i.e., contacts remain closed), the strobe shall revert to a non-synchronized flash rate. The speaker and speaker strobe appliances shall be designed for indoor flush mounting to 4” x 2-1/8” (10.2 x 5.5.cm) electrical boxes without need for an extension ring or surface mounting to Cooper-Wheelock’s E50SB or E50SSB surface boxes. The speaker and speaker strobe shall incorporate a speaker mounting plate with a snap-on grille cover. The finish of the Series E50 speakers and speakers strobes shall be white or red. Table 1: Average RMS Current E50 Speaker Strobes E50 Strobe Current - Wall Mount 241575W 24MCW 24MCWH 15/75cd 15cd 30cd 75cd 110cd 135cd 185cd Table 2: E50 UL Reverberant dBA @ 10 Feet watts 1/8 1/4 1/2 1 2 E50 Speaker 7 7 79 . 5 8 2. 5 85 8 8 E50 Speaker Strobe 77 79.5 82.5 85 88

www.gamewell-fci.com 9021-60127 Rev. A page 3 of 3 Specifications and Ordering Information Model Wall Mount Ceiling Mount Strobe Candela Grill Color Flush Mount Backbox Surface Mount Backbox Mounting Options E50-R X X - Red 4’ x 4” x 2-1/8” (10.2 x 10.2 x 5.5 cm) E50SB-R E,O,P,Q,R,U,Y,AA E50-W X X - White 4’ x 4” x 2-1/8” (10.2 x 10.2 x 5.5 cm) E50SB-W E,O,P,Q,R,U,Y,AA E50-241575W-FR X - 15 (75 on Axis) Red 4’ x 4” x 2-1/8” (10.2 x 10.2 x 5.5 cm) E50SSB-R E,Q,U,BB E50-241575W-FW X - 15 (75 on Axis) White 4’ x 4” x 2-1/8” (10.2 x 10.2 x 5.5 cm) E50SSB-W E,Q,U,BB E50-24MCW-FR X - 15/30/75/110 Red 4’ x 4” x 2-1/8” (10.2 x 10.2 x 5.5 cm) E50SSB-R E,Q,U,BB E50-24MCW-FW X - 15/30/75/110 White 4’ x 4” x 2-1/8” (10.2 x 10.2 x 5.5 cm) E50SSB-W E,Q,U,BB E50-24MCWH-FR X - 135/185 Red 4’ x 4” x 2-1/8” (10.2 x 10.2 x 5.5 cm) E50SSB-R E,Q,U,BB E50-24MCWH-FW X - 135/185 White 4’ x 4” x 2-1/8” (10.2 x 10.2 x 5.5 cm) E50SSB-W E,Q,U,BB NOTE: Due to continuous development of our products, specifcations and offerings are subject to change without notice in accor- dance with Cooper-Wheelock Inc. standard terms and conditions. Mounting Accessories Mounting Options Description Max. Number of Conductors AWG.#18 AWG.#16 AWG.#14 AWG.#12 AA E50SB-R or E50SB-W BB E50SSB-R or E50SB-W E See Note 1 4 ” S q u a r e b y 2 1 / 8 ” D e e p , F l u s h ( B O ) 8888 O RP-R Retrofit Plate P See Note 2 SBB-R or SBB-W Backbox For surface mounting speakers, chimes and electronic appliances 8888 Q See Note 3 4” Square 2-1/8” or 1-1/2” Deep with Extension Ring, Flush (BO) 1-1/2” 8 2-1/8” 8 1-1/2” 8 2-1/8” 8 1-1/2” 8 2-1/8” 8 1-1/2” 4 2-1/8” 8 R SFP-R or SFP-W Semi-Flush Plate Stamped aluminum surface wall plate which mounts behind the basic unit and serves to cover recessed backboxes in semi-flush mounting applications. It is painted to match the signal. U 5” Square Backbox with Extension Ring, Flush (BO) Note 1: Option E is typical of a steel city 52171 box or equal. Note 2: Option P use with Series RSSP. Note 3: Option Q is typical of a steel city 52171 box with a steel city 53151 extension ring or equal.