E40870-000

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 42

Technical content

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products 1Heat-shrinkable Tubing SC L Sem irigid, E ncapsulant-L ined, Polyolefin Tubing Product Facts I 3:1 shrink ratio I Splash-resistant, m oisture- resistant covering; not intended for use w here im m ersion in fluids is required I R ugged protection against abrasion, vibration, and flexing I E xcellent strain relief and insulation of w eak points I R oHS com pliant Installation Minimum shrink temperature: 125°C [257°F] Minimum full recovery temperature: 135°C [275°F] Operating Tem perature R ange -55°C to 110°C [-67°F to 230°F] Specifications/Approvals

Applications

Encapsulates components, splices, and terminations where moisture resistance and mechanical protection are required. Encapsulant melts and flows to fill surface irregularities of the substrate. While still hot, the tubing can be blocked to form a wire breakout. Available in: Am ericas Europe Asia Pacific II I Series U L M ilitary R aychem SC L E85381 A M S-DTL-23053/4*, C lass 1 R T -1301 6 00 V , 125°C *Form erly M IL-I-23053/4 and M IL-DTL-23053/4.

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 SC L (Continued) Product Dim ensions Ordering Inform ation Inside D iam eter R ecovered W all Thickness Size Additional M inim um M axim um M eltable W all Standard C olor Expanded R ecovered Total W all After H eating as Supplied After H eating After H eating (N om inal) Wall thickness w ill be less if tubing recovery is restricted during shrinkage. C olor Standard B lack (-0) for all sizes, plus one additional color per size per P roduct Dim ensions table. Size selection A lw ays order the largest size that w ill shrink snugly over the com ponent to be covered. Special order sizes are available upon request. Standard packaging In 1.2-m eter [4-foot] lengths. O rdering description* Specify product nam e, size and color (for exam ple, SC L 1/4-0). *Europe only. For supply to M IL spec., Def Stan and B S add -M S, -DS or -B S to ordering description.

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products 1Heat-shrinkable Tubing SC T Flam e-R etardant, Adhesive-L ined, Sem irigid Polyolefin Tubing (E xtended Tem perature R ange) Product Facts I 4:1 shrink ratio allow s a few sizes to cover a w ide range of splice and com ponent diam eters I Flam e-retardant and m echanically tough, the tubing provides strain relief and abrasion protection of w ire splices, term inals, and other com ponents I Thick adhesive liner form s an effective barrier against fluids and m oisture and perform s w ell at an extended tem perature range I R oHS com pliant environment. Specially formulated to function at an extended temperature range. Installation Minimum shrink temperature: 110°C [230°F] Minimum full recovery temperature: 135°C [266°F] Operating Tem perature R ange -40°C to 150°C [-40°F to 302°F] Specifications/Approvals Series R aychem SC T SC T SC D Available in: Am ericas Europe Asia Pacific II I

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 SC T (Continued) Product Dim ensions Ordering Inform ation Inside D iam eter R ecovered W all Thickness* Part M inim um M axim um Total W all M eltable W all N um ber Expanded R ecovered After H eating After H eating as Supplied After H eating (N om inal) *Wall thickness w ill be less if tubing recovery is restricted during shrinkage. C olor B lack Size selection A lw ays order the largest size that w ill shrink snugly over the com ponent being covered. Special order sizes are available upon request. Standard packaging C ut pieces. M arking Tubing w ill be printed w ith its num bered size (such as SC T -1, SC T -2, SC T -3, SC T -4). O rdering description Specify product nam e, num bered size, color and cut length (for exam ple, SC T -NO .3-E3-0-7 5M M ).

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products 1Heat-shrinkable Tubing SFR Very Flexible, Flam e-R etardant, Silicone E lastom er Tubing Product Facts I Outstanding low -tem perature flexibility I R esistance to hydraulic fluids, fuel, and lubricating oil I Very good ablative characteristics: w hen exposed to flam e, surface turns to insulative char or “ablates” I R oHS com pliant Provides cable jacketing, harness protection, and strain relief for electronic components, semi- conductor leads, and wire splices. Suitable for applications that require flexibility over a wide range of operating temperatures. Installation Minimum shrink temperature: 135°C [285°F] Minimum full recovery temperature: 175°C [347°F] Operating Tem perature R ange -75°C to 180°C [-103°F to 356°F] Specifications/Approvals Series M ilitary R aychem SFR A M S-DTL-23053/10* R T -1140 M IL-P R F-46 846 , Type II, C lass 1 *Form erly M IL-I-23053/10 and M IL-DTL-23053/10. Available in: Am ericas Europe Asia Pacific II I

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 SFR (Continued) Product Dim ensions Ordering Inform ation Inside D iam eter R ecovered W all Thickness Size M inim um Expanded M axim um R ecovered After H eating as Supplied After H eating Wall thickness w ill be less if tubing recovery is restricted during shrinkage. C olor Standard B lack (-0) Size selection A lw ays order the largest size that w ill shrink snugly over the com ponent to be covered. Special order sizes are available upon request. Standard packaging O n spools. O rdering description* Specify product nam e, size and color (for exam ple, SFR 1/4-0). *Europe only. For supply to M IL spec., Def Stan and B S add -M S, -DS or -B S to ordering description.

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products 1Heat-shrinkable Tubing SR FR Available in: Am ericas Europe Asia Pacific II I temperatures. Unlike other silicone materials, SRFR displays outstanding physical strength. It resists extreme heat shocks, and exhibits good thermal insulation. SRFR is non- burning and has outstanding ablative properties as well as excellent physical and electrical properties. SRFR is used in medical equipment where its key properties are outstanding flexibility and ability to withstand exposure to sterilization conditions. Other applications include thyristor power cable insulation, heating element and bus bar insulation, fiber optic bundle sheathing, and rocketry support cable protection. Series U L R aychem SR FR E85381 V W-1 R T -1142 6 00V , 200°C R W-2057 Highly Flexible, Silicone R ubber Tubing Product Facts I Highly flam e-retardant I E xtrem ely flexible at high and low tem peratures I Shrink ratio 1.5:1 m inim um except sizes 4/2 .9 and 2 9 /2 0 I R oHS com pliant Specifications/Approvals Installation Minimum shrink temperature: 135°C [275°F] Minimum full recovery temperature: 175°C [347°F] Operating Tem perature R ange -75°C to 200°C [-103°F to 392°F]

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 SR FR (Continued) Product Dim ensions Ordering Inform ation Inside D iam eter R ecovered W all Thickness* Size M inim um Expanded M axim um R ecovered After H eating as Supplied After H eating *Wall thickness w ill be less if tubing recovery is restricted during shrinkage. C olor Standard G ray (-8) Size selection A lw ays order the largest size that w ill shrink snugly over the com ponent to be covered. Standard packaging O n spools. O rdering description Specify product nam e, size and color (for exam ple, SR FR 2.9/1.7 -8).

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products 1Heat-shrinkable Tubing SST/SST-FR Self-Sealing, Heat-Shrinkable Tubing Product Facts I Thick adhesive liner form s an effective barrier against fluids and m oisture I Thick-w all insulation, strain relief and abrasion protection I No need for greases, tape, or epoxy I E xpansion ratios as high as 3:1 I Available in flam e-retardant m aterial I SST has the follow ing agency approvals: - AB S (Am erican B ureau of Shipping) - L loyd’s (L loyd’s R egister of Shipping) I R oHS com pliant Specifications/Approvals Series M ilitary Industry Agency R aychem SST —— R W-2011 SST -FR A M S-DTL-23053/15*, A STM D 6 85, nonburning A B S, Lloyd’s R W-2011 C lasses 1 and 2 *Form erly M IL-I-23053/I5 and M IL-DTL-23053/15. SST provides a simple, positive splice-sealing method that offers protection under adverse environmental conditions. Tubing supplied with standard sealant provides water sealing and environ - mental protection in wet or underground applications. The thermoplastic adhesive not only seals, but also provides mechanical strain relief. The polymer tubing has excellent insulating, abrasion-resistance, and strain-relief properties. Installation Minimum shrink temperature: 90°C [195°F] Minimum full recovery temperature: 121°C [250°F] Operating Tem perature R ange -55°C to 110°C [-67°F to 230°F] Available in: Am ericas Europe Asia Pacific II I

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 SST/SST-FR (Continued) Product Dim ensions Inside D iam eter W all Thickness R ecom m ended Standard M inim um M axim um N om inal W all C able Size† N om inal Expanded R ecovered Expanded After R ange for Length as Supplied After H eating H eating†† 6 00-Volt C able SST*-03 30**, 48 0.300 0.100 0.025 0.07 0 18 through 14 A WG SST*-04 30**, 48 0.400 0.150 0.025 0.07 0 14 through 10 A WG SST*-07 48 0.7 50 0.220 0.030 0.095 8 through 1 A WG SST*-11 48 1.100 0.37 5 0.040 0.120 2 through 4/0 A WG SST*-13 48 1.300 0.37 5 0.035 0.120 2 through 4/0 A WG SST*-15 48 1.500 0.500 0.050 0.140 2/0 A WG through 500 M C M SST*-17 48 1.7 00 0.500 0.045 0.140 2/0 A WG through 500 M C M SST*-20 48 2.000 0.7 50 0.050 0.16 0 350 M C M through 1000 M C M SST*-27 48 2.7 00 0.900 0.050 0.16 0 500 M C M through 1250 M C M SST*-30 48 3.000 1.250 0.050 0.16 0 900 M C M through 1500 M C M SST*-40 48 4.000 1.7 50 0.050 0.16 0 1500 M C M through 2500 M C M SST*-45 48 4.500 1.7 50 0.050 0.16 0 1500 M C M through 2500 M C M †In place of asterisk* substitute length of tubing to be ordered. For exam ple, SST*-11, as the second colum n indicates, com es in 48-inch lengths, so a 48-inch cut piece of SST tubing w ould be SST 48-11. ††Wall thickness w ill be less if tubing recovery is restricted during shrinkage. **30-inch length standard for /226 coating only. C olor Standard B lack Nonstandard White, R ed, Y ellow and C lear (C lear is non-flam e-retardant) Size selection A lw ays order the largest size that w ill shrink snugly over the com ponent to be covered. Special order sizes are available upon request. Standard packaging See P roduct Dim ensions table. O rdering description Specify product nam e, cut length, size and color (for exam ple, SST 48-07 /FR /97 ). Ordering Inform ation Part Num bering System “NM” - no marking Color Black/leave blank (standard) White/WHT Red/RED Yellow/YLW Clear/CL (non-flame retardant) Adhesive/sealant /97 standard with FR /226 standard with Non FR “FR” - flame-retardant Size Length in inches (48 inch max) Family E xam ple: SST-48-0 7/FR /9 7/NM

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products 1Heat-shrinkable Tubing TAT-12 5 Adhesive-L ined, Flexible, Polyolefin Tubing Product Facts I 2 :1 shrink ratio I Thin adhesive lining that bonds to outer tubing and surface below , form ing a positive environm ental seal I Flexibility of both tubing and adhesive I M oisture seal that is resistant to bending of the substrate I G ood m echanical strength and cut-through resistance I Adhesive that bonds to a w ide variety of plastics, rubbers, and m etals, including polyethylene, neoprene, lead, and steel I R oHS com pliant Installation Minimum shrink temperature: 95°C [203°F] Minimum full recovery temperature: 121°C [250°F] Operating Tem perature R ange -55°C to 110°C [-67°F to 230°F] Specifications/Approvals in-line splices, bimetallic joints, and components from fluids, moisture, and corrosion. Repairs damaged wire insulation, especially where flexibility is required. Provides one- step electrical insulation and moisture sealing. Available in: Am ericas Europe Asia Pacific II Series U L* M ilitary R aychem TA T -125 Type 1 (colors) E85381 A M S-DTL-23053/4*, C lass 2 R W-3032 6 00 V , 125°C TA T -125 Type 2 (clear) —— R W-3032 *Form erly M IL-I-23053/4 and M IL-DTL-23053/4. Sizes 1/4" through 1 1/2" only.

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 TAT-12 5 (Continued) Inside D iam eter R ecovered W all Thickness M inim um M axim um Total W all Adhesive W all Size Expanded R ecovered After H eating After H eating as Supplied After H eating (N om inal) (N om inal) Wall thickness w ill be less if tubing recovery is restricted during shrinkage. Product Dim ensions C olor Standard B lack (-0) Nonstandard White (-9), red (-2), blue (-6 ), yellow (-4), green (-5), brow n (-1), orange (-3), violet (-7 ), gray (-8), clear (-X , not flam e-retardant) Size selection A lw ays order the largest size that w ill shrink snugly over the com ponent to be covered. Special order sizes are available upon request. Standard packaging In 1.2-m eter [4-foot] lengths. O rdering description Specify product nam e, size and color (for exam ple, TA T -125 1/4-0). Ordering Inform ation

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products 1Heat-shrinkable Tubing TC C aps Available in: Am ericas Europe Asia Pacific II I Widely used for wire termi - nations because of their light weight, small size and durability. Vibration-proof caps are used to insulate and terminate dead-end electrical cables, fixtures, connectors, and other elec - trical equipment. Also used to protect the ends of wire during storage. Installation Minimum shrink temperature: 110°C [230°F] Minimum full recovery temperature: 135°C [275°F] Series U L R aychem TC C aps E85381 TC C aps SC D 6 00 V , 125°C Sem irigid, Flam e- R etardant Polyolefin C aps Product Facts I 2 .5:1 shrink ratio I Flam e-retardant I Perm anent or tem porary m ethod to term inate w ires I R apid, sim ple installation I R ugged protection against abrasion, vibration, and flexing I R oHS com pliant Specifications/Approvals Operating Tem perature R ange -55°C to 135°C [-67°F to 275°F]

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 TC C aps (Continued) Product Dim ensions C olor Length Inside D iam eter R ecovered W all Thickness** N om inal M inim um O pen M inim um M axim um After H eating Size O verall as B arrel after Expanded R ecovered Supplied R ecovery* as Supplied After H eating *See glossary for definition of “barrel”. **Wall thickness w ill be less if tubing recovery is restricted during shrinkage. C olor Standard O ne color per size per the P roduct Dim ensions table. Size selection A lw ays order the largest size that w ill shrink snugly over the com ponent to be covered. Standard packaging In pieces. O rdering description Specify product nam e, size and color (for exam ple, TC -C A P S-4003-2). Ordering Inform ation

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products 1Heat-shrinkable Tubing TFE and TFE R Available in: Am ericas Europe Asia Pacific II Series M ilitary R aychem TFE, TFER A M S-DTL-23053/12*, C lasses 3 and 5 R W-2055 (TFE) Def. Stan. 59-97 Type 5A (TFE) R W-2054 (TFER ) Def. Stan. 59-97 Type 5B (TFER ) *Form erly M IL-I-23053/12 and M IL-DTL-23053/12. High-Tem perature, C hem ically Inert, M odified Tubing m ade of PTFE Product Facts I Shrink ratio: 1.8:1 (TFE ) 3.2 :1 (TFE R ) I High flam e-resistance I E xcellent chem ical resistance I R oHS com pliant Specifications/Approvals environments. Used to cover hydraulic hose and couplings to prevent contamination and corrosion. The high mechanical strength and extremely low coefficient of friction make it good for reducing damage to bearing shafts and similar applications. Installation Minimum shrink temperature: 330°C [625°F] Minimum full recovery temperature: 340°C [644°F] Operating Tem perature R ange -67°C to 250°C [-88.6°F to 482°F]

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 TFE and TFE R (Continued) Product Dim ensions TFE Inside D iam eter W all Thickness Size M inim um Expanded M axim um R ecovered N om inal R ecovered as Supplied After H eating After H eating Wall thickness w ill be less if tubing recovery is restricted during shrinkage. TFE R Inside D iam eter W all Thickness Size M inim um Expanded M axim um R ecovered N om inal R ecovered as Supplied After H eating After H eating Wall thickness w ill be less if tubing recovery is restricted during shrinkage. C olor Standard C lear (-X) Size selection A lw ays order the largest size that w ill shrink snugly over the com ponent to be covered. Special order sizes are available upon request. Standard packaging In 1.2-m eter [4-foot] lengths. O rdering description* Specify product nam e, size and color (for exam ple,TFE 22-X). *Europe only. For supply to M IL spec., Def Stan and B S add -M S, -DS or -B S to ordering description. Ordering Inform ation

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products 1Heat-shrinkable Tubing Tubing K its and M ini-Spools Sm aller Packaging Options for Single W all and Adhesive-L ined Tubing Products Product Facts I VE R SAFIT and R NF-10 0 tubing: 2 :1 shrink ratio I DW P-12 5: 3:1 shrink ratio I E S10 0 0 : 4:1 shrink ratio I VE R SAFIT tubing’s low full recovery tem perature reduces installation tim e and the risk of dam age to tem perature-sensitive com ponents I R NF-10 0 offers excellent physical, chem ical, and electrical properties that m eet or exceed com m ercial, industrial and m ilitary standards for highly reliable, general purpose tubing I DW P-12 5 and E S10 0 0 have high-shrink-ratios to allow for insulation and sealing of irregular shapes; few sizes cover a w ide range of diam eters I R oHS com pliant wide variety of electrical applications, including wire splices, terminations, break - outs and connector-to- cable transitions. Installation Minimum full recovery temperature: VERSAFIT: 90°C [194°F] ES1000: 135°C [275°F] Operating Tem perature R ange VERSAFIT and RNF-100: -55°C to 135°C [-67°F to 275°F] DWP-125: -40°C to 110°C [-40°F to 230°F] ES1000: -40°C to 130°C [-40°F to 266°F] Specifications/Approvals strain relief of in-line com - ponents, electrical connec - tions, wire terminations, and splices. They can be used to bundle wires for flexible light duty harnesses. Also to identify or color code wires, cables, terminals and electronic components. Adhesive-lined DWP-125 and ES1000 environmen - tally seal and protect a Available in: Am ericas Europe Asia Pacific II Series U L C SA R aychem V ER SA FIT E35586 V W-1 LR 31929 V W-1 R W-3009 6 00 V , 125°C 6 00 V , 125°C R NF-100 E35586 LR 31929 R T -350 6 00 V , 125°C 6 00 V , 125°C DWP -125 E35586 — DWP -125 SC D 6 00 V , 125°C ES1000 E85381 — R T -1113 6 00 V , 125°C

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 Tubing K its and M ini-Spools (Continued) Single W all Tubing K IT 1 – 2 to 1 Shrink R atio • B lack • 60 0 V, 12 5°C , UL /C SA VW -1 (K IT 1 PN: A552 51-0 0 0 ) Expanded I.D . Q uantity (6 Inch Pieces) Fits W ire G auge Size R efill Part N um ber V ER SA FIT -3/16 ” 30 18 – 14 A WG D7 6 139-000 V ER SA FIT -1/4” 28 12 – 10 A WG F37 06 3-000 V ER SA FIT -3/8” 24 8 A WG D27 57 3-000 V ER SA FIT -1/2” 20 6 –3 A WG C 0246 2-000 V ER SA FIT -3/4” 14 2 – 1/0 A WG A 926 6 4-000 V ER SA FIT -1” 10 2/0 – 4/0 A WG C 2127 0-000 K IT 2 – 2 to 1 Shrink R atio •

7 C olors** • 60 0 V, 12 5°C ,

UL /C SA VW -1 (except clear) (K IT 2 PN: D54859 -0 0 0 ) Expanded I.D . Q uantity (6 Inch Pieces) Fits W ire G auge Size R efill Part N um ber V ER SA FIT -3/32” 35 18 A WG E31091-000 V ER SA FIT -1/8” 28 16 A WG 349256 -000 V ER SA FIT -3/16 ” 21 14 A WG C 53800-000 V ER SA FIT -1/4” 21 12 – 10 A WG C 87 6 05-000 V ER SA FIT -3/8” 14 8 A WG A 826 91-000 V ER SA FIT -1/2” 14 6 – 3 A WG E10896 -000 **C lear tubing in K it 2 and K it 2 R efills is R NF-100. Adhesive-L ined Tubing K IT 3 – B lack/W hite/R ed/C lear

• 60 0 V, 12 5°C , UL (K IT 3 PN: E 42 160 -0 0 0 ) Expanded I.D . Q uantity (6 Inch Pieces) Fits W ire G auge Size R efill Part N um ber DWP -125-1/8” 25 20 – 16 A WG (3 to 1 Shrink R atio) D14889-000 DWP -125-3/16 ” 25 14 –10 A WG (3 to 1 Shrink R atio) E87 36 7 -000 DWP -125-1/4” 24 12 –10 A WG (3 to 1 Shrink R atio) F9186 4-000 DWP -125-1/2” 10 6 –3 A WG (3 to 1 Shrink R atio) F41454-000 DWP -125-3/4” 5 2 – 1/0 A WG (3 to 1 Shrink R atio) C 6 7 6 17 -000 DWP -125-1” 3 2/0 – 4/0 A WG (3 to 1 Shrink R atio) F6 6 6 23-000 ES1000-NO .1 6 16 – 12 A WG (4 to 1 Shrink R atio) ES1000-NO .2 5 12 – 10 A WG (4 to 1 Shrink R atio) ES1000-NO .3 5 10 – 8 A WG (4 to 1 Shrink R atio) ES1000-NO .4 3 6 –3 A WG (4 to 1 Shrink R atio) K ITS 1, 2 and 3 are com prised of a durable six section plastic box w ith hinged lid. Inside the lid are product selection guidelines. A sk your Sales R epresentative about K IT 4 and K IT 6 , our Econom y Tubing K its in a reclosable plastic bag, also used on “point of sale” racks. H ere are Part Num bers for those K its and their content: K IT 4: E32151-000 (Three pieces each of 3/16 ”, 1/4”, 3/8”, 1/2”, 3/4” and 1” B lack tubing in 6 inch pieces) K IT 6 : C 7 2402-000 (Three pieces each of 3/6 4”, 1/16 ”, 3/32” and 1/8” B lack tubing in 6 inch pieces) VE R SAFIT M INI-SPOOL S 2 to 1 Shrink R atio • B lack • 60 0 V, 12 5°C , UL /C SA VW -1 Expanded I.D . Q uantity (Feet) Part N um ber V ER SA FIT -3/6 4” 100 C 16 404-000 V ER SA FIT -1/16 ” 7 5 E4087 0-000 V ER SA FIT -3/32 6 5 D7 0981-000 V ER SA FIT -1/8” 6 0 C 17 6 00-000 V ER SA FIT -3/16 ” 50 F27 135-000 V ER SA FIT -1/4” 40 F6 447 9-000 V ER SA FIT -3/8” 35 D57 591-000 V ER SA FIT -1/2” 30 E37 316 -000 V ER SA FIT -3/4” 25 449582-000 V ER SA FIT -1” 15 F27 156 -000 V ER SA FIT is a very flexible, highly flam e-retardant polyolefin tubing, 90°C full recovery tem perature, good fluid resistance w ith a U L 224/C SA V W-1 flam m ability rating. R NF-10 0 M INI-SPOOL S 2 to 1 Shrink R atio • B lack • 60 0 V, 12 5°C , UL /C SA Expanded I.D . Q uantity (Feet) Part N um ber R NF-100-3/6 4” 100 D00409-000 R NF-100-1/16 ” 7 5 A 6 6 551-000 R NF-100-3/32 6 5 D42391-000 R NF-100-1/8” 6 0 F56 6 29-000 R NF-100-3/16 ” 50 E7 7 288-000 R NF-100-1/4” 40 F7 5818-000 R NF-100-3/8” 35 D12330-000 R NF-100-1/2” 30 A 817 36 -000 R NF-100-3/4” 25 E4086 6 -000 R NF-100-1” 15 E6 2131-000 R NF-100 is a flexible, flam e-retardant polyolefin tubing, 121°C full recovery tem perature, excellent fluid resistance w ith a U L 224/C SA A ll Tubing flam m ability rating.

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products 1Heat-shrinkable Tubing TUG A-G P Shiny, Non-Flam e- R etardant, Polyolefin Tubing Product Facts I 2 :1 shrink ratio I C an be easily hot-stam ped I B right, shiny surface I Sem iflexible, non-flam e- retardant, halogen-free I C onform s to substrates m ore uniform ly and w ith less longitudinal change than m ost PVC -based m aterials I R oHS com pliant flame-retardant product is not needed but where electrical insulation and mechanical performance are important. TUGA-GP makes an attractive cover - ing for many automotive, appliance, and consumer- goods applications. Installation Minimum shrink temperature: 85°C [85°F] Minimum full recovery temperature: 110°C [230°F] Operating Tem perature R ange -55°C to 125°C [-67°F to 257°F] Specifications/Approvals Series R aychem TU G A -G P R W-2201 Available in: Am ericas Europe Asia Pacific I

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 TUG A-G P (Continued) Product Dim ensions Inside D iam eter W all Thickness* Size M inim um Expanded M axim um R ecovered N om inal as Supplied After H eating After H eating *Wall thickness w ill be less if tubing recovery is restricted during shrinkage. Ordering Inform ation C olor Standard B lack (-0) Size selection A lw ays order the largest size that w ill shrink snugly over the com ponent to be covered. Special order sizes available upon request. Standard packaging O n spools. O rdering description Specify product nam e, size and color (for exam ple, TU G A 3/1.5-0).

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products 1Heat-shrinkable Tubing UR HT Available in: Am ericas Europe Asia Pacific II I Series M ilitary R aychem U R H T SA E-A S817 6 5/1, Type II* U R H T SC D *heat-shrinkable, crosslinked, flexible polyolefin Ultra-High-R atio, Flam e- R etardant, Polyolefin Heat- Shrinkable Tubing Product Facts I Shrink ratios as high as 8:1 I Specially form ulated for thick w all insulation, strain relief and abrasion protection I Flam e-retardant passing ASTM D 635 I E xcellent perform ance in both hot and cold environm ents I Optional factory applied adhesive provides w atertight environm ental sealing in w et and corrosive locations I R oHS com pliant Specifications/Approvals Ultra-high-shrink-ratio, heat- shrinkable tubing, with expansion ratios as high as 8-to-1, is designed to con - form to odd shapes and shrink over large transitions, allowing for the repair and sealing of cable connectors and equipment. Cable harnesses can be repaired and released without disassembly. This product can be used to seal the back end of a connector or simply repair a damaged outer insulation of a cable or wire. URHT tubing is available with or without a hot melt adhesive lining. Installation Minimum shrink temperature: 135°C [275°F] Minimum full recovery temperature: 150°C [302°F] Operating Tem perature R ange -55°C to 135°C [-67°F to 275°F]

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 UR HT (Continued) C olor Standard B lack (-0) Size selection A lw ays order the largest size that w ill shrink snugly over the com ponent to be covered. Standard packaging In pieces. O rdering description Specify product nam e, size, cut length and color (for exam ple, U R H T -200-10-0). Ordering Inform ation Part Num bering System 42 = Std Adhesive 86 = High Performance Adhesive Unrestricted recovered length Expanded inside diameter - as supplied URHT - _ / _ / _ Inside D iam eter W all Thickness M inim um M axim um N om inal U nrestricted Full Size Expanded R ecovered R ecovered R ecovered Length as Supplied After H eating After H eating ± 6 .35 (.250) (3, 4, 6 , 10) (3, 4, 6 , 10) Product Dim ensions

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products 1Heat-shrinkable Tubing Versafit Highly Flam e-R etardant, Very Flexible, L ow -Shrink- Tem perature, Polyolefin Tubing Product Facts I 2 :1 shrink ratio I L ow shrink tem perature reduces installation tim e and the risk of dam age to tem perature-sensitive com ponents I Very flexible; doesn’t easily w rinkle w hen bent I Highly flam e-retardant I Hot stam ps extrem ely w ell I Higher tem perature rating, better therm al stability, and higher resistance to physical abuse than noncrosslinked m aterials I Free of polybrom inated biphenyls (PB B s) and polybrom inated biphenyl oxides and ethers (PB B Os and PB B E s), w hich are classified as environm entally hazardous substances I R oHS com pliant Installation Minimum shrink temperature: 70°C [158°F] Minimum full recovery temperature: 90°C [194°F] Operating Tem perature R ange -55°C to 135°C [-67°F to 275°F] Specifications/Approvals military applications; electrically insulates and protects in-line components, disconnect terminals, and splices. Bundles wires for very flexible light-duty harnesses. Strain-relieves electrical wire connections for commercial applica - tions. Identifies or color- codes wires, cables, terminals, and components. Available in: Am ericas Europe Asia Pacific II I Series U L C SA M ilitary R aychem V ersafit E35586 V W-1 LR 31929 V W-1 A M S-DTL-23053/5* R W-3009 6 00 V , 125°C 6 00 V , 125°C C lasses 1 & 3 *Form erly M IL-I-23053/5 and M IL-DTL-23053/5.

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 Versafit (Continued) Product Dim ensions Inside D iam eter R ecovered W all Thickness Size Expanded M axim um R ecovered After H eating as Supplied After H eating Wall thickness w ill be less if tubing recovery is restricted during shrinkage. *Nonstandard size; available by special order only. C olor Standard B lack (-0), w hite (-9), red (-2), blue (-6 ), yellow (-4) Nonstandard B row n (-1), orange (-3), green (-5), violet (-7 ), gray (-8) Size selection A lw ays order the largest size that w ill shrink snugly over the com ponent to be covered. Special order sizes are available upon request. Standard packaging O n spools. O rdering description* Specify product nam e, size and color (for exam ple, V ersafit 1/4-0). A vailable in the convenient M ini-Spool packaging/dispensing system , for sizes 3/6 4” up to 1” (black only). ***Europe only. For supply to M IL, Def Stan and B S add -M S, -DS or -B S to ordering description. Ordering Inform ation

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products 1Heat-shrinkable Tubing Versafit-3X Available in: Am ericas Europe Asia Pacific II I Very Flexible, High-Shrink- R atio, Highly Flam e- R etardant, L ow -Shrink- Tem perature, Polyolefin Tubing Product Facts I Highly flam e-retardant I 3:1 shrink ratio easily accom m odates irregular shapes; few sizes cover a w ide range of diam eters I L ow shrink tem perature reduces installation tim e and the risk of dam age to tem perature-sensitive com ponents I Free of polybrom inated biphenyls (PB B s) and polybrom inated biphenyl oxides and ethers (PB B Os and PB B E s) w hich are classified as environm entally hazardous substances I R oHS com pliant Specifications/Approvals Provides electrical insula - tion and strain relief of in-line components, electrical connections, wire terminations, and splices. Bundles wires for flexible light duty harnesses. Identifies or color codes wires, cables, terminals and electrical and electronic components. Installation Minimum shrink temperature: 70°C [158°F] Minimum full recovery temperature: 90°C [194°F] Operating Tem perature R ange -55°C to 135°C [-67°F to 275°F] Series U L C SA R aychem V ersafit-3X E35586 V W-1 LR 31929 V W-1 R W-3009 6 00 V , 125°C 6 00 V , 125°C

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 Versafit-3X (Continued) Product Dim ensions Inside D iam eter R ecovered W all Thickness* Size M inim um Expanded M axim um R ecovered After as Supplied After H eating H eating *Wall thickness w ill be less if tubing recovery is restricted during shrinkage. C olor Standard B lack (-0) Nonstandard White (-9), red (-2), blue (-6 ), yellow (-4), green (-5), brow n (-1), orange (-3), violet (-7 ), gray (-8) Size selection A lw ays order the largest size that w ill shrink snugly over the com ponent to be covered. Standard packaging O n spools. O rdering description Specify product nam e, size and color (for exam ple, V ersafit-3X-1/4-0). Ordering Inform ation

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products 1Heat-shrinkable Tubing Versafit V2 Available in: Am ericas Europe Asia Pacific II I Highly Flam e-R etardant, Very Flexible, L ow -Shrink- Tem perature, Polyolefin Tubing Product Facts I 2 :1 shrink ratio I L ow shrink tem perature reduces installation tim e and the risk of dam age to tem perature-sensitive com ponents I Very flexible; doesn’t easily w rinkle w hen bent I Highly flam e-retardant I Hot stam ps extrem ely w ell I Higher tem perature rating, better therm al stability, and higher resistance to physical abuse than noncrosslinked m aterials I Free of polybrom inated biphenyls (PB B s) and polybrom inated biphenyl oxides and ethers (PB B Os and PB B E s), w hich are classified as environm entally hazardous substances I R oHS com pliant Specifications/Approvals applications; electrically insulates and protects in-line components, disconnect terminals, and splices. Bundles wires for very flexible light-duty harnesses. Strain-relieves electrical wire connections. Identifies or color-codes wires, cables, terminals, and components. Installation Minimum shrink temperature: 70°C [158°F] Minimum full recovery temperature: 90°C [194°F] Operating Tem perature R ange -30°C to 125°C [-22°F to 257°F] Series U L C SA R aychem V ersafit V 2 E35586 V W-1 LR 31929 V W-1 R W-3023 6 00 V , 125°C 6 00 V , 125°C

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 Versafit V2 (Continued) Inside D iam eter W all Thickness Expanded M axim um Expanded as R ecovered* Size as Supplied R ecovered Supplied After H eating After H eating (N om inal) (M inim um ) *Wall thickness w ill be less if tubing recovery is restricted during shrinkage. Product Dim ensions C olor Standard B lack (-0) Nonstandard White (-9), red (-2), blue (-6 ), yellow (-4), green (-5), orange (-3), violet (-7 ), brow n (-1), gray (-8) Size selection A lw ays order the largest size that w ill shrink snugly over the com ponent to be covered. Special order sizes are available upon request. Standard packaging O n spools. O rdering description Specify product nam e, size and color (for exam ple, V 2-3.0-0). Ordering Inform ation

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products 1Heat-shrinkable Tubing Versafit V4 Available in: Am ericas Europe Asia Pacific II I Very-Thin-W all, Very Flexible, Highly Flam e-R etardant, Polyolefin Tubing Product Facts I 2 :1 shrink ratio I Very thin w all provides space savings and rapid shrinking I L ow shrink tem perature further reduces installation tim e and risk of dam age to tem perature-sensitive com ponents I Very flexible; doesn’t easily w rinkle w hen bent I Free of polybrom inated biphenyls (PB B s) and polybrom inated biphenyl oxides and ethers (PB B Os and PB B E s), w hich are classified as environm entally hazardous substances I R oHS com pliant Specifications/Approvals space saving is important. Offers the ability to pack components more closely than is possible with standard tubings. Cost- effective choice for many commercial applications; electrically insulates and protects in-line compo - nents, disconnect terminals, and splices. Used for strain relief on high-density connectors. Installation Minimum shrink temperature: 70°C [158°F] Minimum full recovery temperature: 90°C [194°F] Operating Tem perature R ange -30°C to 125°C [-22°F to 257°F] Series U L C SA R aychem V ersafit V 4 E85381 V W-1 LR 31929 V W-1 R W-3023

300 V , 125°C 150 V , 125°C

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 Versafit V4 (Continued) Inside D iam eter W all Thickness Expanded M axim um Expanded as R ecovered* Size as Supplied R ecovered Supplied After H eating After H eating (N om inal) (M inim um ) Inside D iam eter R ecovered W all Thickness* Inch M inim um Expanded M axim um R ecovered After Size as Supplied After H eating H eating *Wall thickness w ill be less if tubing recovery is restricted during shrinkage. Product Dim ensions C olor Standard B lack (-0) Nonstandard O ther colors available upon request. Size selection A lw ays order the largest size that w ill shrink snugly over the com ponent to be covered. Special order sizes are available upon request. Standard packaging O n spools. M arking M arked w ith U L/C SA /-F- legends (m etric sizes) or unm arked (inch sizes). O rdering description Specify product nam e, size (m m or in.) and color (for exam ple, V 4-1.0-0). Ordering Inform ation

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products 1Heat-shrinkable Tubing Versaflex Available in: Am ericas Europe Asia Pacific II Versaflex sleeving is suited for the mechanical protec - tion of wire harnesses, hoses, and all other appli - cations where exceptional flexibility combined with superior abrasion/cut resist - ance is required. It also serves as an economical means for wire bundling that will not trap heat or moisture; expanding easily to fit over irregular shapes, then contracting to conform and grip. To prevent fraying, these products should be cut to length using a hot knife. Series U L R aychem V ersaflex-FR E306 97 6 V W-1, 125° C V ersaflex — R K -6 7 7 2 E xpandable, B raided, Polyester Sleeving Product Facts I E xcellent abrasion and cut- through resistance I L ightw eight I Flexible (even at low tem peratures) I Fungus proof I Not affected by m ost chem ical and solvents, non-hygroscopic I Versaflex-FR sleeving m eets UL VW -1 and is self- extinguishing I W ide range of sizes available I R oHS com pliant Specifications/Approvals Installation This product is cold applied. Operating Tem perature R ange -50° C to 150° C [-58° F to 302° F] (220° C [-58° F to 302° F] for short periods)

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 Versaflex (Continued) Versaflex (m etric) N om inal Size Size R ange M inim um M axim um 50 (1.96 9) 40 (1.57 5) 6 0 (2.36 2) Versaflex (Im perial) Size N om inal Size Size R ange 3/4 19 (0.7 48) 13 – 32 (0.512 – 1.26 0) 1-1/4 32 (1.256 ) 19 – 45 (0.7 48 – 1.7 7 2) 1-3/4 45 (1.7 7 2) 32 – 7 0 (1.26 0 – 2.7 56 ) 2 51 (2.008) 38 – 7 6 (1.496 – 2.992) Versaflex-FR flam e retardant, expandable polyester braid Size N om inal Size Size R ange 3/4 19 (0.7 48) 13 – 32 (0.512 – 1.26 0) 1-1/4 32 (1.256 ) 19 – 45 (0.7 48 – 1.7 7 2) 1-3/4 45 (1.7 7 2) 32 – 7 0 (1.26 0 – 2.7 56 ) 2 51 (2.008) 38 – 7 6 (1.496 – 2.992) Product Dim ensions C olor Standard V ersaflex (m etric) : B lack (-0) G rey (-8) V ersaflex (im perial) : B lack (-0) V ersaflex-FR : B lack w ith a w hite X tracer (-09) Standard packaging O n spools. O rdering description Specify product nam e, size and color (for exam ple, V ER SA FLEX-FR -1/4-09-SP ) Ordering Inform ation

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products 1Heat-shrinkable Tubing XFFR Halogen-Free, Flam e-R etardant, Heat-Shrinkable Tubing Product Facts I E m its m inim al am ounts of toxic or acid gasses during com bustion I M eets perform ance requirem ents of M IL -C -2 4640 and M IL -C -2 4643 cable jackets I R esists m oisture, fungus, and w eathering I Available in expansion ratios as high as 3:1 I XFFR has the follow ing approvals: - AB S (Am erican B ureau of Shipping) - L loyd’s (L loyd’s R egister of Shipping) I R oHS com pliant Specifications/Approvals Series M ilitary Industry R aychem XFFR M IL-C -246 40 NES 7 13 R W-2016 M IL-C -246 43 NES 7 11 can be used for rejacketing and repairing halogen-free cables in any enclosed area where a flame-retardant , halogen-free environment is required. These environments include tunnels, buildings, mass transit vehicles, and ships. When installed with S-1305 tape, the tubing can also be used in applica - tions requiring water seal - ing and protection from abrasion and corrosion. Installation Minimum shrink temperature: 70°C [158°F] Minimum full recovery temperature: 121°C [250°F] Operating Tem perature R ange -55°C to 110°C [-67°F to 230°F] Available in: Am ericas Europe Asia Pacific II I

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 XFFR (Continued) C olor Standard B lack (-0) Size selection A lw ays order the largest size that w ill shrink snugly over the com ponent to be covered. Standard packaging 1.2-m eter [4-foot] or 7 .5-m eter [25-foot] lengths. Ordering Inform ation Part Num bering System “NM” - no mark□ Length in feet (4 feet standard)□ Size□ Family XFFR - 03 X 4 / NM Product Dim ensions Inside D iam eter R ecovered W all Thickness* Size M inim um Expanded M axim um R ecovered After H eating as Supplied After H eating (N om inal) *Wall thickness w ill be less if tubing recovery is restricted during shrinkage.

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products 1Heat-shrinkable Tubing ZH2 Available in: Am ericas Europe Asia Pacific II I Flexible, Highly Flam e- R etardant, L ow R ecovery Tem perature, ZE R OHAL Polyolefin Tubing Product Facts I 2 :1 shrink ratio I Highly flam e-retardant; UL /C SA VW -1 flam m ability rating I E nvironm entally friendly tubing essentially free of halogens I E m its m inim al am ounts of toxic or acid gasses w hen burned I R oHS com pliant Specifications/Approvals strain relief of connections and terminations in comput - ers, appliances, and other commercial electronic products. Jacketing and bundling of light duty har - nesses in rail and mass transit vehicles, buildings, and other enclosed areas where emission of toxic gasses from burning mate - rials containing halogens is very undesirable. Installation Minimum shrink temperature: 70°C [158°F] Minimum full recovery temperature: 90°C [194°F] Operating Tem perature R ange -30°C to 125°C [-22°F to 257°F] Series U L C SA R aychem ZH 2 E35586 V W-1 LR 31929 V W-1 R W-3036 6 00 V , 125°C 6 00 V , 125°C

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 ZH2 (Continued) Inside D iam eter W all Thickness Expanded M axim um Expanded as R ecovered* Size as Supplied R ecovered Supplied After H eating After H eating (N om inal) (M inim um ) *Wall thickness w ill be less if tubing recovery is restricted during shrinkage. Product Dim ensions C olor Standard B lack (-0) Size selection A lw ays order the largest size that w ill shrink snugly over the com ponent to be covered. Standard packaging O n spools. O rdering description Specify product nam e, size and color (for exam ple, ZH 2-6 .0-0). Ordering Inform ation

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products 1Heat-shrinkable Tubing ZH4 Available in: Am ericas Europe Asia Pacific II I Very-Thin-W all, Very Flexible, Highly Flam e- R etardant, L ow R ecovery Tem perature, ZE R OHAL Polyolefin Tubing Product Facts I 2 :1 shrink ratio I Highly flam e-retardant; UL /C SA VW -1 flam m ability rating I Very thin w all provides space savings and rapid shrinking I L ow shrink tem perature further reduces installation tim e and risk of dam age to tem perature-sensitive com ponents I E nvironm entally friendly tubing essentially free of halogens I E m its m inim al am ounts of toxic or acid gasses w hen burned I R oHS com pliant Specifications/Approvals protection of in-line compo - nents, disconnect terminals, and splices in computers, appliances, and other com - mercial electronic products. Typically used where space saving is important. Offers the ability to pack compo - nents more closely than is possible with standard tubings. Used for strain relief on high-density con - nectors. Suitable for use in rail and mass transit vehi - cles, buildings, and other enclosed areas where emission of toxic gasses from burning materials con - taining halogens is very undesirable. Installation Minimum shrink temperature: 70°C [158°F] Minimum full recovery temperature: 90°C [194°F] Operating Tem perature R ange -30°C to 125°C [-22°F to 257°F] Series U L C SA R aychem ZH 4 E85381 V W-1 LR 31929 V W-1 R W-3036

300 V , 125ºC 150 V , 125ºC

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 ZH4 (Continued) Inside D iam eter W all Thickness Expanded M axim um Expanded as R ecovered* Size as Supplied R ecovered Supplied After H eating After H eating (N om inal) (M inim um ) *Wall thickness w ill be less if tubing recovery is restricted during shrinkage. Product Dim ensions C olor Standard B lack (-0) Size selection A lw ays order the largest size that w ill shrink snugly over the com ponent to be covered. Standard packaging O n spools. O rdering description Specify product nam e, size and color (for exam ple, ZH 4-2.0-0). Ordering Inform ation

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products 1Heat-shrinkable Tubing ZH-10 0 Flexible, Thin-W all, L ow - Fire-Hazard Tubing Product Facts I 2 :1 shrink ratio I L ow sm oke em issions I Flexible, flam e-retardant I No added halogens I L ow evolution of acid gases I R oHS com pliant Specifications/Approvals Series Industry R aychem ZH -100 B R 1326 A R W-2031 ZH-100 is a flexible, thin-wall, heat-shrinkable tubing designed for low- fire-hazard applications. ZH-100 contains no added halogens, and exhibits excellent fire safety characteristics combined with low evolution of acid gases, while retaining good mechanical and fluid resistance properties. Installation Minimum shrink temperature: 80°C [176°F] Minimum full recovery temperature: 120°C [248°F] Operating Tem perature R ange -30°C to 105°C [-22°F to 221°F] Available in: Am ericas Europe Asia Pacific II I

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 ZH-10 0 (Continued) C olor Standard B lack (-0) Size selection A lw ays order the largest size that w ill shrink snugly over the com ponent to be covered. Special order sizes are available upon request. Standard packaging O n spools. O rdering description Specify product nam e, size and color (for exam ple, ZH -100 1/8-0). Ordering Inform ation Product Dim ensions Inside D iam eter R ecovered W all Thickness* Size M inim um Expanded M axim um R ecovered After H eating as Supplied After H eating *Wall thickness w ill be less if tubing recovery is restricted during shrinkage.

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 R AYCH EM Tubing Products 1Heat-shrinkable Tubing ZHTM Heat-Shrinkable, Flexible Tubing w ith L ow Toxicity for Fire Safety Applications Product Facts I 2 :1 shrink ratio I L ow sm oke em ission I System 10 0 tubing I R oHS com pliant properties. Used for insulation and protection of cables, harnesses, and electrical and electronic components in enclosed spaces, such as in marine applications, mass transit systems, and offshore installations, to reduce toxicity risks, or where equipment would be irreparably damaged by corrosive products of combustion. Installation Minimum shrink temperature: 80°C [176°F] Minimum full recovery temperature: 121°C [250°F] Operating Tem perature R ange -30°C to 105°C [-22°F to 221°F] Specifications/Approvals A flexible, thick-wall, heat- shrinkable tubing to be used in conjunction with -100 molded parts and Zerohal cable to form Raychem System 100. This material exhibits excellent fire safety characteristics combined with low smoke emission and low evolution of acid gases while retaining good mechanical and fluid-resistance Available in: Am ericas Europe Asia Pacific II I Series M ilitary Agency Industry R aychem ZH TM Def. Stan. 59-97 B S 4G -198 Part 3 Type 15 B R 1326 A R W-2058 Issue 3 Type 8 V G 95343 Part 5 Type L V DE 0341/P t 9005

9-17734 4 7-9 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -5 22-6 75 2 G erm any: 4 9-6 25 1-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5 -4 75 -6 222 China: 86 -4 0 0 -820 -6 0 15 specified. Values in brackets Specifications subject M exico: 5 2-5 5 -110 6 -0 80 0 Japan: 81-4 4 -84 4 -80 13 ZHTM (Continued) C olor Standard B lack (-0) Size selection A lw ays order the largest size that w ill shrink snugly over the com ponent to be covered. Special order sizes are available upon request. Standard packaging O n spools. O rdering description Specify product nam e, size and color (for exam ple, ZH TM 8/4-0). Europe only. For supply to Def Stan and B S add -DS or -B S to ordering description. Ordering Inform ation Product Dim ensions Inside D iam eter R ecovered W all Thickness* Size M inim um Expanded M axim um R ecovered After H eating as Supplied After H eating *Wall thickness w ill be less if tubing recovery is restricted during shrinkage.