E3Z-G82-M3J0.3M

E3Z-G61 OMRON | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Grooved-type Photoelectric Sensor with Built-in Amplifier E3Z-G Grooved Design Eliminates Optical Axis Adjustment

• One- and two-axis models available.  Provides mutual interference prevention and EN standard compliance. Be sure to read Safety Precautions on page 4.

Ordering Information

Sensors (Refer to Dimensions on page 4.) * The following table shows the model numbers of e-CON Pre-wired Connectors that are available. The Ratings and Specifications are the same as those for the E3Z- G61/G62. Accessories (Order Separately) Sensor I/O Connectors (Refer to Dimensions on XS3.) Note: Refer to Introduction to Sensor I/O Connectors for details. Protective Bracket (Refer to Dimensions on E39-L/F39-L/E39-S/E39-R) Sensing method Appearance Connection method Sensing distance No. of opti- cal axes Model NPN output PNP output Through-beam Pre-wired (2 m) E3Z-G61 2M * E3Z-G81 2M Pre-wired Connector (M8, 4 pins) E3Z-G61-M3J 0.3M E3Z-G81-M3J 0.3M Pre-wired (2 m) E3Z-G62 2M * E3Z-G82 2M Pre-wired Connector (M8, 4 pins) E3Z-G62-M3J 0.3M E3Z-G82-M3J 0.3M No. of optical axes Cable length Model 1 axis 0.3 m E3Z-G61-ECON 0.3M 0.5 m E3Z-G61-ECON 0.5M 2 m E3Z-G61-ECON 2M 2 axes 0.3 m E3Z-G62-ECON 0.3M 0.5 m E3Z-G62-ECON 0.5M 2 m E3Z-G62-ECON 2M Infrared light 25 mm Cable specification Appearance Type of cable Model Standard cable 2 m 4-wire XS3F-M421-402-A 5 m XS3F-M421-405-A 2 m XS3F-M422-402-A 5 m XS3F-M422-405-A Appearance Model Applicable model E39-L149 E3Z-G Straight L-shape

Ratings and Specifications Number of optical axes 1 2 Model NPN output E3Z-G61/E3Z-G61-M3J E3Z-G62/E3Z-G62-M3J Item PNP output E3Z-G81/E3Z-G81-M3J E3Z-G82/E3Z-G82-M3J Sensing distance (distance between arms of groove) 25 mm Standard sensing object Opaque, 1.5-mm dia. min. Light source (wavelength) Infrared LED (940 nm) Power supply voltage 12 to 24 VDC±10%, ripple (p-p): 10% max. Current consumption 25 mA max. 40 mA max. Control output Load power supply voltage: 26.4 VDC max. Load current: 100 mA max. (Residual voltage: 1 V max.) Open collector output (NPN or PNP depending on model) Light-ON/Dark-ON selectable Protection circuits Reversed power supply polarity protection, Output short-circuit protection, and Mutual interference pre- vention Response time Operate or reset: 1 ms max. Ambient illumination (Receiver side) Incandescent lamp: 3,000 lx max. Sunlight: 10,000 lx max. Ambient temperature range Operating: −25 to 55°C, Storage: −40 to 70°C (with no icing or condensation) Ambient humidity range Operating: 35% to 85%, Storage: 35% to 95% (with no condensation) Insulation resistance 20 MΩ min. at 500 VDC between lead wires and case Dielectric strength 1,000 VAC, 50/60 Hz for 1 min between lead wires and case Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions Shock resistance Destruction: 500 m/s2 3 times each in X, Y, and Z directions Degree of protection IP64 (IEC 60529) Connection method Pre-wired cable (standard length: 2 m and 0.5 m)/Pre-wired Connector (standard length: 300 mm) Indicator Operation indicator (orange) Weight (packed state) Pre-wired (with 2-m cable) Approx. 65 g Pre-wired Connectors Approx. 30 g Material Case ABS (Acrylonitril Butadiene Styrene) Accessories Instruction manual

No. of optical axes/model Operation mode Timing charts Operation selector Output circuit 1 axis E3Z-G61 E3Z-G61-M3J Light-ON L side (LIGHT ON) Dark-ON D side (DARK ON) 2 axes E3Z-G62 E3Z-G62-M3J Light-ON L side (LIGHT ON) Dark-ON D side (DARK ON) Control output Output transistor Incident light No incident light ON OFF ON OFF Operate Reset Operation indicator (orange) Load (e.g., relay) (Between brown and black leads) (S1) ZD 2 4 e-CON Connector Pin Arrangement Connector Pin Arrangement Pin 2 is not used. 12 to 24 VDCBrown Black(Control output) Blue 100mA max.Operation indicator (orange) Load (relay) Photo- electric Sensor Main Circuit Incident light No incident light ON OFF ON OFF Operate Reset Operation indicator (orange) Load (e.g., relay) (Between brown and black leads) Control output Output transistor Incident light No incident light ON OFF ON OFF Operate Reset Operation indicator (orange) Load (e.g., relay) Control output Output transistor (Between brown and black (white) leads) e-CON Connector Pin Arrangement (S1) (S2) 0 V ZD White ZD 2 4 Connector Pin Arrangement 12 to 24 VDC Brown Black(Control output) Blue 100mA max. Operation indicator (orange) Operation indicator (orange) Load (relay) 100mA max. Load (relay) (Control output) Photo- electric Sensor Main Circuit Incident light No incident light ON OFF ON OFF Operate Reset Operation indicator (orange) Load (e.g., relay) (Between brown and black (white) leads) Control output Output transistor No. of optical axes/model Operation mode Timing charts Operation selector Output circuit 1 axis E3Z-G81 E3Z-G81-M3J Light-ON L side (LIGHT ON) Dark-ON D side (DARK ON) 2 axes E3Z-G82 E3Z-G82-M3J Light-ON L side (LIGHT ON) Dark-ON D side (DARK ON) Incident light No incident light ON OFF ON OFF Operate Reset Operation indicator (orange) Load (e.g., relay) (Between blue and black leads) Control output Output transistor 2 4 3 0 V ZD Connector Pin Arrangement Pin 2 is not used. 12 to 24 VDCBrown Black (Control output) Blue 100mA max. Operation indicator (orange) Load (relay) Photo- electric Sensor Main Circuit Incident light No incident light ON OFF ON OFF Operate Reset Operation indicator (orange) Load (e.g., relay) (Between blue and black leads) Control output Output transistor (Between blue and black (white) leads) Incident light No incident light ON OFF ON OFF Operate Reset Operation indicator (orange) Load (e.g., relay) Control output Output transistor 2 2 4 0 V ZD ZD White Connector Pin Arrangement 12 to 24 VDC Brown Black (Control output) Blue 100mA max. Operation indicator (orange) Operation indicator (orange) Load (relay) 100mA max. Load (relay) (Control output) Photo- electric Sensor Main Circuit (Between blue and black (white) leads) Incident light No incident light ON OFF ON OFF Operate Reset Operation indicator (orange) Load (e.g., relay) Control output Output transistor

Plugs (Sensor I/O Connectors) Safety Precautions Refer to Warranty and Limitations of Liability. This product is not designed or rated for ensuring safety of persons either directly or indirectly. Do not use it for such purposes.

• Do not use the product in atmospheres or environments that exceed product ratings.
• The degree of protection for this Product is IP64 (IEC). The degree of protection for other models in the E3Z Series is IP67. Dimensions Sensors Accessories (Order Separately) Mounting Brackets Refer to E39-L for details. Sensor I/O Connectors Refer to XS3F and E3Z (E39-ECON@) for details. 1234 E39-ECON@M E39-ECONW@M 1234 4 3 12 Pin arrangement Note: Pin 2 of 1-axis models is not used. Classifi- cation Wire color Connector pin No. Application 1-axis models 2-axis models DC Brown 1 Power supply (+V) White 2 --- Output 2 (S2) Blue 3 Power supply (0 V) Black 4 Output Output 1 (S1) Brown White Blue Black Wire color XS3F-M421-402-A XS3F-M421-405-A XS3F-M422-402-A XS3F-M422-405-A e-CON connectorM8 connector WARNING Precautions for Correct Use (Unit: mm) Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified. Operation mode selector * On the other side Note: Both 1 and 2-axis models have S1; only 2-axis models have S2. *S1 output: Black *S2 output: White Operation Indicator (orange) 5050 Two, 4.5 dia. Optical axis S1 * Optical axis S2 * 4040 7.5 9 19 10.5 1111 204 4-dia. vinyl-insulated round cable with 3 or 4 conductors (Conductor cross section: 0.2 mm 2 (AWG24), Insulator diameter: 1.1 mm), Standard lengths: 2 m, 0.5 m 4 dia. vinyl-insulated round cable with 3 or 4 conductors, Standard length: 0.3 m Pre-wired Connector Models (E3Z-G@@@-M3J) e-CON Pre-wired Connector Model 4 dia. vinyl-insulated round cable with 3 or 4 conductors, Standard length: 0.3 m, 0.5m, and 2m Connector: 37104-3122-000FL (made by Sumitomo 3M) 5.9 15.6 E3Z-G61 E3Z-G62

Read and Understand This Catalog Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranty and Limitations of Liability WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. LIMITATIONS OF LIABILITY OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR. Application Considerations SUITABILITY FOR USE OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the products. At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:

• Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.
• Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations.
• Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. PROGRAMMABLE PRODUCTS OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof. Disclaimers CHANGE IN SPECIFICATIONS Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchased products. DIMENSIONS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown. PERFORMANCE DATA Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability. ERRORS AND OMISSIONS The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading errors, or omissions. 2009.5 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2009 All Right Reserved.