E3Z-D67

E3Z-T66A OMRON | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 15

Technical content

Photoelectric Sensor with Built-in Amplifier E3Z Compact Sensor Offers Long Sensing Distance and Superior Noise-Immunity H Photo-IC provides long sensing distance: 15 m for through-beam, 4 m for retroreflective, and 1 m for diffuse H Integrated Photo-IC improves noise immunity to interference from inverters and other inductive loads H New injection molding technology assures IP67 rating to withstand water and dust H Switch-selectable, Light-ON/Dark-ON operation H M8 connector-ready and 2-m, pre-wired models H NPN or PNP output models available

Ordering Information

Sensing method Light source Appearance Connection h d Sensing di Part numberSensing method Light source Appearance Connection method Sensing distance NPN output PNP output Through-beam IR Pre-wired 15 m E3Z-T61 E3Z-T81g Connector E3Z-T66 E3Z-T86 Polarized retroreflective RED (See Note 1.)Pre-wired 100 mm to 4 m 100 mm to 3 m E3Z-R61 E3Z-R81 retroreflective Connector 100 mm to 3 m (See Note 2.) E3Z-R66 E3Z-R86 Diffuse reflective IR Pre-wired 5t o1 0 0m m E3Z-D61 E3Z-D81Diffuse reflective IR Connector 5 to 100 mm (wide view) E3Z-D66 E3Z-D86 Pre-wired 1m E3Z-D62 E3Z-D82 Connector 1 m E3Z-D67 E3Z-D87 Note: 1. The Reflector is sold separately. Select the Reflector model most suited to the application. 2. Sensing distance can be extended to 4 meters when the E39-R1S reflector is used. The sensing distance is 3 meters when the E39-R1 reflector is used.

J ACCESSORIES (ORDER SEPARATELY) Slit for Through-beam Models (E3Z--Tjj) Order a slit for each emitter and receiver. Slit width Sensing distance (typical) Minimum sensing object (typical) Part number 0.5 mm dia. 50 mm 0.5 mm dia. E39-S65A 1m md i a . 200 mm 1m md i a . E39-S65B 2m md i a . 800 mm 2m md i a . E39-S65C 0.5×10 mm 1m 0.7 mm dia. E39-S65D 1×10 mm 2.2 m 1.2 mm dia. E39-S65E 2×10 mm 5m 2.4 mm dia. E39-S65F Reflectors for Retroreflective Models Name Sensing distance (typical) Part number Reflector 100 mm to 3 m E39-R1Reflector 100 mm to 4 m E39-R1S 100 mm to 5 m E39-R2 100 mm to 2.5 m E39-R9 100 mm to 3.5 m E39-R10 Miniature Reflector 50 mm to 1.5 m E39-R3 Tape Reflector 150 mm to 700 mm E39-RS1Tape Reflector 150 mm to 1.1 m E39-RS2 150 mm to 1.4 m E39-RS3 Note: The actual sensing distance may be reduced to approximately 70% of the typical sensing distance when using a Reflector other than the E39-R1 or the E39-R1S. J MOUNTING BRACKETS Appearance Description Part number L-bracket, horizontal E39-L104 L-bracket, vertical E39-L44 Open top, 20° angle adjustability E39-L43 Protected top 5° angle adjustability E39-L144 Appearance Description Part number Compact vertical protective cover bracket E39-L142 Vertical protective cover bracket E39-L98 Note: If a through-beam model is used, order two Mounting Brackets — one for the emitter and one for the receiver.

Appearance Cable type Part number Straight 2 m (6.56 ft) Four-wire type XS3F-M421-402-AStraight 5 m (16.40 ft) Four wire type XS3F-M421-405-A Right angle 2 m (6.56 ft) XS3F-M422-402-ARight angle 5 m (16.40 ft) XS3F-M422-405-A Specifications Item Sensing method Through-beam Polarized retroreflective Diffuse reflectiveItem NPN output E3Z-T61/T66 E3Z-R61/R66 E3Z-D61/D66 E3Z-D62/D67 PNP output E3Z-T81/T86 E3Z-R81/R86 E3Z-D81/D86 E3Z-D82/D87 Sensing distance 15 m 100 mm (4 m Note 1) (when using E39-R1S) 100 mm (3 m Note 2) (when using E39-R1) White paper (100×100 mm): 100 mm White paper (300×300 mm): Standard sensing object Opaque: 12 mm (dia. min.) Opaque: 75 mm (dia. min.) --- Hysteresis --- 20% max. of setting distance Directional angle Both emitter and receiver: 3 to 15° 2t o1 0° --- Light source (wave length) Infrared LED (860 nm) Red LED (680 nm) Infrared LED (860 nm) Power supply voltage 12 to 24 VDC±10% including 10% (p-p) max. ripple Current consumption Emitter: 15 mA Receiver: 20 mA 30 mA max. Control output 100 mA max. at 26.4 VDC, open collector output (residual voltage: 1 V max.) L-ON/D-ON, switch selectable Circuit protection Load short-circuit and reversed power supply protection Reversed power supply connection, output short-circuit, and mutual interference protection Response time 1m sm a x . Sensitivity adjustment One-turn potentiometer Ambient illumination Incandescent lamp 3,000 lux max. illumination (receiver side) Sunlight 10,000 lux max. Ambient Operating -- 2 5°Ct o5 5°C( - - 1 3°F to 131°F)Ambient temperature Storage -- 4 0°Ct o7 0°C( - - 4 0°F to 158°F) with no icing or condensation Ambient Operating 35% to 85%Ambient humidity Storage 35% to 95% with no condensation Insulation resistance 20 MΩ min. at 500 VDC Dielectric strength 1,000 VAC, 50/60 Hz for 1 min Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude or 300 m/s2 for 2 hours each in X, Y, and Z axes Shock resistance Destruction 500 m/s2 3 times each in X, Y, and Z axes Enclosure rating IP67 (IEC60529) Approvals CE Connection method 2 m cable or M8 connector Indicator Operation indicator (orange) Stability indicator (green) Emitter has power indicator (orange) only Weight Pre-wired cable (2 m) Approx. 120 g (4.2 oz) Approx. 65 g (2.3 oz)Weight (packed state) Connector Approx. 30 g (1.1 oz) Approx. 20 g (0.7 oz) Material Case: PBT (polybutylene terephthalate); Lens: Methacrylate resin Accessories Instruction manual (Order Reflector and Mounting Bracket separately.) Note: 1. Sensing distance can be extended up to 4 meters when the E39-R1S reflector is used. 2. Sensing distance can be extended up to 3 meters when the E39-R1 reflector is used.

Stability indicator (green) Operation selector Operation indicator (orange) Sensitivity adjuster Through-beam Models E3Z-T6j Receiver Retroreflective Models E3Z-R6j Operation J OUTPUT CIRCUITS Model E3Z-T61/-T66/-R61/-R66/-D61/-D66/-D62/-D67 NPN output Through-beam receiver Retroreflective model Diffuse reflective model Through-beam emitter Operation indicator Stability indicator Main circuit Orange Green 100 mA max. Load (Relay) Brown Black Blue Control output 12 to 24 VDC Power indicator (orange) Main circuit 12 to 24 VDC Brown Blue Model E3Z-T81/-T86/-R86/-D81/-D86/-D82/-D87 PNP output Through-beam receiver Retroreflective model Diffuse reflective model Through-beam emitter Operation indicator Stability indicator Main circuit Orange Green Brown Black Blue Control output 12 to 24 VDC 100 mA max. Load (Relay) Power indicator (orange) Main circuit 12 to 24 VDC Brown BlueConnector pin arrangement Pin 2 is open. Pins 2, 4 are open. J TIMING CHARTS Incident ONOperation indicator (orange) Output transistor Load (relay) Interrupted OFF ON OFF Operate Reset (Between blue and black) Incident ONOperation indicator (orange) Output transistor Load (relay) Interrupted OFF ON OFF Operate Reset (Between blue and black) Dark-ON (D-ON) OperationLight-ON (L-ON) Operation

XS3F-M421-402-A XS3F-M421-405-A XS3F-M422-402-A XS3F-M422-405-A Classification Wire color Connector pin No. Use DC Brown A Power supply (+V)DC White B Pin 2 is not used. Blue C Power supply (0 V) Black D Output Note: The through-beam emitter does not use pins 2 and 4. Engineering Data J PARALLEL OPERATING RANGE (TYPICAL) Through-beam Models E3Z-Tj1( Tj6) Distance Y (mm) Through-beam Models E3Z-Tj1( Tj6) and Slit Distance Y (mm) Retroreflective Models E3Z-Rj1( Rj6) and Reflector Distance Y (mm) Distance X (m) 2-dia. slit 1-dia. slit Slit: 0.5 x 10 Slit: 2 x 10 E39-RS1 E39-RS2 E39-RS3 E39-R3 E39-R1 E39-R1S E39-R2 Slit: 1 x 10 Distance X (m) Distance X (m) J OPERATING RANGE (TYPICAL) Distance Y (mm) Distance Y (mm) White drawingpaper SUS (glossy surface) Black carbon Diffuse Reflective Models E3Z-Dj1( Dj6) Diffuse Reflective Models E3Z-Dj2( Dj7) Distance X (mm) Distance X (m) SUS (glossy surface) White drawingpaper Black carbon

J EXCESS GAIN RATIO VS. DISTANCE (TYPICAL) Through-beam Models E3Z-Tj1( Tj6) Excess gain ratio Distance X (m) Distance X (m) Retroreflective Models E3Z-Rj1( Rj6) and Reflector Diffuse Reflective Models E3Z-Dj1( Dj6) Distance X (mm) Diffuse Reflective Model E3Z-Dj2( Dj7) Distance X (m) E39-R3 E39-R1 E39-R1S E39-R2 Excess gain ratio Excess gain ratio Excess gain ratio Sensing target: 100 x 100 mm white paper Sensing target: 300 x 300 mm white paper Sensing Target Size vs. Sensing Distance (Typical) Distance (mm) Distance (m) Black paper White paper Black paper Side length (one side) of sensing target: d (mm) Side length (one side) of sensing target: d (mm) Diffuse Reflective Models E3Z-Dj1( Dj6) Diffuse Reflective Models E3Z-Dj2( Dj7) White paper SUS (glossy surface) SUS (glossy surface)

Unit: mm (inch) J SENSORS Through-beam (Pre-wired Models) Through-beam (Connector Models) Optical axis Lens Power indicator (orange) Vinyl-insulated round cable with two conductors, 4 dia. (0.2 mm2 with 1.1-dia. insulator);standard length:2m Emitter Operation selector Sensing adjuster Optical axis Lens Receiver Optical axis Lens Power indicator (orange) connector Emitter Operation selector Sensing adjuster Optical axis Lens Receiver connector Power indicator (orange) Power indicator (orange) Stability indicator (green) Stability indicator (green) Vinyl-insulated round cable with three conductors, 4 dia. (0.2 mm2 with 1.1-dia. insulator); standard length: 2m Tw o , M3 Tw o , M3 Two , M3 Two , M3 Retroreflective Models (Pre-wired Models) Retroreflective Models (Connector Models) T wo, 7-dia. lenses Operation selector Sensing adjuster Optical axis Stability indicator (green) Vinyl-insulated round cable with three conductors, 4 dia. (0.2 mm2 with 1.1-dia. insulator); standard length: 2m Tw o , M3Emitter Receiver Power indicator (orange) connector Power indicator (orange) Operation selector Sensing adjusterStability indicator (green) T wo, 7-dia. lenses Receiver Optical axis Emitter Two , M3 (0.79) 10.8 (0.43) (1.22) E3Z-T61 E3Z-T81 E3Z-T66 E3Z-T86 E3Z-R61 E3Z-R81 Diffuse Reflective Models (Pre-wired Models) E3Z-D61 E3Z-D62 E3Z-D81 E3Z-D82 E3Z-R66 E3Z-R86 Diffuse Reflective Models (Connector Models) E3Z-D66 E3Z-D67 E3Z-D86 E3Z-D87 (0.79) 10.8 (0.43) (1.22) (0.79) 10.8 (0.43) (1.22) (0.79) 10.8 (0.43) (1.22) (0.79) 10.8 (0.43) (1.22) (0.79) 10.8 (0.43) (1.22) (0.67) (0.67) (0.67)17 (0.67) (0.67) (0.67)

Unit: mm (inch) J SLITS E39-S65D E39-S65E E39-S65F Side A Material SUS301 stainless steel Model E39-S65A E39-S65B E39-S65C 0.5 dia. 1.0 dia. 2.0 dia. Side A Material SUS301 stainless steel Model E39-S65D E39-S65E E39-S65F 0.5 1.0 2.0 E39-S65A E39-S65B E39-S65C 32.2 (1.27) 32.2 (1.27) 10.4 (0.41) 10.4 (0.41) 15.5 (0.61)15.5 (0.61) Material Surface: Acrylic resin Backside: ABS resin T wo, 3.5 dia. J REFLECTORS E39-R1 E39-R1S 40.3 (1.59) 59.9 (2.36) 7.5 (0.30) 5.2 (2.05) 2.7 (0.11) 34 (1.34) 1.6 (0.06) E39-R2 Material Surface: Acrylic resin Backside: ABS resin Four, 3.5 dia. 80.8 (3.18) 74.5 (2.93) 59.9 (2.36) (2.05) 1.6 (0.06) 7.5 (0.30) 34 (1.34) 7 (0.28) 6.5 (0.26) 2.7 (0.11) E39-R9 42.3 (1.67) 25 (0.98) 35.4 (1.39) (0.31) 3.5 (0.14) 5.5 (0.22)Material Reflecting surface: Acrylic resin Back: ABS resin 30.9 (1.22) 4 (0.16) 8 (0.31)

Reflecting surface: Acrylic resin Back: ABS resin 61.4 (2.42) 30.4 (1.20) (0.20) 8 (0.31) 10 (0.39) 30 (1.18) 40 (1.57) 51.6 (2.03) 3.5 (0.14) 5.5 (0.22) 47 (1.85) J MINIATURE REFLECTOR Tw o , M3 SUS304 stainless steel Adhesive tape side Tw o , 3.2 dia. Material Surface: Acrylic resin Backside: ABS resin E39-R3 41.8 (1.65) 25.4 (1.00) 22.5 (0.89) 34.8 (1.37) (1.50) (1.34) 22.9 (0.90) (0.63) 10.1 (0.40) 1.2 19.3 3.4 2.6 1.2 10° 18.45 3.4 4.5 6 3.4 29 (1.14) 0.2 0.211 14° 13.7 (0.54) (0.79) J TAPE REFLECTORS E39-RS2 E39-RS3 Adhesive tape side Adhesive tape side Adhesive tape side Material: Acrylic resin Material: Acrylic resin Material: Acrylic resin E39-RS1 35 (1.38) 40 (1.57) (1.38) 0.6 (0.02) 80 (3.15) (2.76) 0.6 (0.02) 0.6 (0.02) (0.39)

(E3Z-D62) E39-L43 With Mounting Bracket (E3Z-D62) Material: SUS304 stainless steel Material: SUS304 stainless steel E39-L104 T wo, 3.2 dia. Tw o , M3 29 (1.14) 13.7 (0.54) 13.7 (0.54) (0.28) 29 (1.14) (0.63) (1.54) 8.8 (0.35) 38.3 (1.51) 1.2 (0.05) 25.4 (1.00) Optical axis 37.8 Tw o , M3 Four, 3.2 dia. Optical axis (0.51) 3.5 (0.14) 30 (1.18) 3.5 (0.14) 7.5 (0.3) 15 (0.59) 25.4 (1.00) 40 (1.57) 30 (1.18)3.5 (0.14) 3.5 (0.14) (1.57) (0.59) 7.5 (0.3) 25.4 (1.00) 1.2 (0.05) Unit: mm (inch) (1.22) (0.79) (0.51) E39-L44 Material: SUS304 stainless steel With Mounting Bracket (E3Z-D62) Optical axis Tw o , 3.2 dia. 16.2 (0.64) 8.7 (0.34) 1.2 (0.05) (0.35) (0.71) 23.2 (0.91) 31.2 (1.23) (1.42) (1.42) 31.2 (1.23) 23.2 (0.91) 25.4 (1.00) 8.7 (0.34) 16.2 (0.64) (0.71) (0.35) (0.79) 35.3 (1.39) (1.22) 14.1 (0.56) 10.8 (0.43)

Material: SUS304 stainless steel (0.98) (0.91) 14.2 (0.56) 38.5 (1.52) 1.5 (0.06) 25.4 (1.00) Optical axis 2-50° (0.79) 10.5 (0.41) 12.3 (0.48) 3.5 (0.14) 25.4 (1.00) 7.3 (0.28) With Sensor (Example: E3Z-L61) E39-L144 Material: SUS304 stainless steel 15.8 (0.62) (0.55) 8.7 (0.34) 722 (0.87) (0.22) (1.46) 1.5 (0.06) (0.55) 25.4 (1.00) 15.3 (0.60) 4.5 4.5 4.0 7.8 (0.47) 5.0 6.9 (0.27) (1.10) 14° Optical axis Four 3.4 dia. 4.5 With Sensor (Example: E3Z-L61) E39-L142

Unit: mm (inch) E39-L98 Material: SUS304 stainless steel Mounting Holes Tw o , M6 56 dia. (2.2) Screw provided (2.4) (0.63) 56 (2.2) 34(1.34) (0.79) (1.73¦0.01) 25.4 (1.00) 35.3 (5.33)

XS3F-M421-402-A (L=2 m) XS3F-M421-405-A (L=5 m) Right Angle XS3F-M422-402-A (L=2 m) XS3F-M422-405-A (L=5 m) J M8 CONNECTOR CORDSETS 4 (0.16) dia. 9d i a . (0.35) 21.5 (0.85) 31.4 (1.24) 50 (1.97) 20.5 (0.81) 23.1 (0.91) 4 (0.16) dia. 50 (1.97) 9 (0.35) dia. 2.15 0.5 3.4 1.95 30 5 Precautions To ensure safe sensor operation, please follow the following precautions: J WIRING Power Supply Voltage Make sure that the power supply to the Sensor is within the rated voltage range. Load Short-circuiting Do not short-circuit the load, or the Sensor may be damaged. Polarity Correct polarity wiring is required to prevent damage to the sensor. Connection Without Load Do not connect power supply to the Sensor with no load connected, or the internal elements may explode or burn. J OPERATING ENVIRONMENT Do not use the Sensor in locations with explosive or flammable gas. J SETTINGS Power Reset Time The Sensor is ready to operate 100 ms after the Sensor is turned ON. If the load and Sensor are connected to independent power supplies respectively, be sure to turn ON the Sensor before turning the load ON. J CONNECTIONS M8 Metal Connector

• Turn off power before disconnecting the sensor.
• Remove the connector cover before connecting or discon- necting the metal connector.
• Secure the connector cover by hand. Do not use any pliers, or the connector may be damaged.
• The proper tightening torque range is between 0.3 and 0.4 N S m. Be sure to tighten the connector securely in order to maintain the the specified degree of protection and to keep the connector from loosening due to vibration. J MOUNTING Use M3 screws to mount the sensor and tighten each screw to a maximum torque of 0.53 NS m. E3Z-jjj E39-L104 Mounting Bracket (sold separately)

Slits for Through-beam Models (E39-S65A/B/C/D/E/F) Sold Separately Hook Protruding portion Lower indented portion Upper indented mounting portion SensorSlit Mounting Method 1. Hook the upper protruding portion of the Slit to the upper indented mounting portion of the Sensor and adjust the posi- tion of the Slit so that the Slit will be in parallel to the lens side of the Sensor. 2. Press the lower protruding portion of the Slit onto the indented mounting portion of the Sensor until the Slit snaps in. Mounting Condition Side View Front View Removal Method 1. Press the upper portion of the Slit. 2. Disconnect the lower protruding portion of the Slit from the Sensor and remove the Slit. OMRON ELECTRONICS LLC One East Commerce Drive Schaumburg, IL 60173 NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4. 1-800-55-OMRON OMRON CANADA, INC.

885 Milner Avenue

Scarborough, Ontario M1B 5V8 416-286-6465 R OMRON ON- -LINE Global - -http://www.omron.com USA - -http://www.omron.com/oei Canada - -http://www.omron.com/oci

Schaumburg, IL 60173 NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4. 1-800-55-OMRON OMRON CANADA, INC. Scarborough, Ontario M1B 5V8 416-286-6465 R OMRON ON- -LINE Global - -http://www.omron.com USA - -http://www.omron.com/oei Canada - -http://www.omron.com/oci