E3S-5LE41

E3S OMRON | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 15

Technical content

Photoelectric Sensor with Built-in Amplifier E3S General-purpose Photoelectric Sensor for High Quality and Reliable Detection Be sure to read Safety Precautions on page 8.

Ordering Information

Note: Sensors with open collectors and different frequencies are available. *1. Through-beam Sensors are normally sold in sets that include both the Emitter and Receiver. Orders for individual Emitters and Receivers are accepted. *2. The difference between the E3S-@@ (@@@) 41 and E3S-@@ (@@@) 42 is in the lens direction when the Sensor is mounted. For details, refer to the dimensions that are provided on page 10 for the E3S-5E41, page 11 for the E3S-DS30E41, and page 12 fo r the E3S-5E42 and E3S-DS30E42. Sensing method Appearance Sensing distance Operation mode Model Through-beam *1 Light-ON/Dark-ON (selectable) E3S-2E4 Emitter E3S-2LE4 Receiver E3S-2DE4 E3S-5E4 Emitter E3S-5LE4 Receiver E3S-5DE4 Retro-reflective E3S-R2E4 Diffuse-reflective E3S-DS10E4 E3S-DS30E4 Through-beam *1 E3S-2E41 Emitter E3S-2LE41 Receiver E3S-2DE41 E3S-5E41 (42) *2 Emitter E3S-5LE41 (42) Receiver E3S-5DE41 (42) Retro-reflective E3S-R2E41 Diffuse-reflective E3S-DS10E41 E3S-DS30E41 (42) *2 Convergent-reflective (narrow vision field) E3S-LS10XE4 Convergent-reflective (wide vision field) E3S-LS20XE4 2 m 5 m 0.1 to 2 m 100 mm 300 mm 2 m 5 m 0.1 to 2 m 100 mm 300 mm 30 to 100 mm (variable) 50 to 250 mm (variable)

Ratings and Specifications * The ambient operating illumination is the illumination that changes the output ±20% at 200 lx. It is not the operational limit. Sensing method Through-beam Retro-re- flective Diffuse-reflective Convergent-reflective Item Model E3S-2E4 E3S-2E41 E3S-5E4 E3S-5E41 (42) E3S-R2E4 E3S- R2E41 E3S- DS10E4 E3S- DS10E41 E3S- DS30E41 (42) E3S- DS30E4S E3S- LS10XE4 E3S- LS20XE4 Sensing distance 2 m 5 m 0.1 to 2 m 100 mm (white paper 50 x 50 mm) 300 mm (white paper 100 x 100) 30 to 100 mm Continuously variable (10 x 10 mm) 50 to 250 mm Continuously variable (50 x 75 mm) Standard sensing object Opaque: 7- mm dia. min. Opaque: 11- mm dia. min. Opaque: 30- mm dia. min. Transparent, opaque Differential travel --- 20% max. of setting distance 0.5 mm max. at 30 mm 5% max. at 50 to 250 mm3 mm max. at 100 mm Directional angle Both emitter and receiver: Light source (wavelength) Infrared LED (950 nm) RED LED (660 nm) Infrared LED (950 nm) Power supply voltage 12 to 24 VDC ±10%, ripple (p-p): 10% max. Current consumption 50 mA max. (Emitter: 25 mA max., Receiver: 25 mA max.) 40 mA max. Control output (solid-state out- put) Output current: 1.5 to 4 mA, Load current: 80 mA max. (residual voltage: 2 V max.) ➜ Refer to page 4. Response time Operate or reset: 3 ms max. Operate or reset: 1 ms max. Sensitivity adjustment With an indicator Ambient illumination (Receiver side) * Incandescent lamp: 3,000 lx max. Sunlight: 10,000 lx max. Ambient temperature Operating: −25 to 55°C, Storage: −40 to 70°C (with no icing or condensation) Ambient humidity Operating: 35% to 85%, Storage: 35% to 95% (with no condensation) Insulation resistance 20 MΩ min. at 500 VDC Dielectric strength 1,000 VAC, 50/60 Hz for 1 min Vibration resistance (destruction) 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions Shock resistance (destruction) 500 m/s 2 3 times each in X, Y, and Z directions Degree of protection IEC IP65 IEC IP67 IEC IP65 IEC IP67 Connection method Pre-wired cable (standard length: 2 m) Indicators Light indicator (red), Stability indicator (green) Material Case Polybuty- lene tereph- thalate Zinc die-cast Polybuty- lene tereph- thalate Zinc die-cast Lens * Polycarbonate Mount- ing Bracket Iron

Engineering Data (Typical) Parallel Operating Range Operating Range E3S-DS10E4 (41) E3S-DS30E4 (41) (42) E3S-LS10XE4 E3S-LS20XE4 100 0.5 1 1.5 2 2.5 3 E3S-2E41 E3S-2E4 Distance X Parallel movement distance Y Distance X (m) Parallel movement distance Y (mm) 240 220 200 180 160 140 120 100 1 2 3 4 65 7 Distance X Parallel movement distance Y Distance X (m) Parallel movement distance Y (mm) 7.0 6.0 5.0 4.0 3.0 2.0 1.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 100 140 16040 60 8020 120 (Y) (−Y) Optical axis Operating position Y (mm) Operating distance X (mm) Operating distance (X) Standard sensing object (50 x 50 mm) Operating position 100 140 16040 60 8020 120 (Y) (−Y) Optical axis Operating position Y (mm) Operating distance (X) Standard sensing object (100 x 100 mm) Operating position Operating distance X (mm) 120100 140 16040 60 8020 Adjust the distance: 30 mm Adjust the distance: 100 mm (Y) (−Y) Optical axis Operating position Y (mm) Operating distance (X) Standard sensing object (10 x 10 mm) Operating position Operating distance X (mm) 250 300 350100 150 20050 Max. distance set (Y) (−Y) Optical axis Operating position Y (mm) Standard sensing object (50 x 75 mm) Operating position Operating distance (X) Operating distance X (mm) Min. distance set (Range at minimum setting)

Sensing Distance vs. Size of Sensing Object Parallel Operating Range E3S-DS10E4 (41) E3S-LS20XE4 Excess Gain vs. Set Distance Load Residual Voltage Characteristics E3S-LS10XE4 E3S-LS3RC4 E3S-DS30E4 (1) (2) 600 500 400 300 200 100 0 100 15050 E3S-DS10E4 (1) The larger the sensing object, the longer the operating distance. d dWhite paper Side length (one side) of sensing object d (mm) Operating distance (mm) Sensing object 500 400 300 200 100 0 100 15050 Short edge of sensing object (mm) Short edge Short: Long ratio = 2:3 White paper Operating distance (mm) Sensing object Long edge 100 Distance X Parallel movement distance Y Distance X (m) Parallel movement distance Y (mm) 10,000 5,000 3,000 1,000 500 300 100 0 140 1606040 80 100 12020 Received light output peak: 100 mm Received light output peak: 30 mm Sensitivity adjuster at maximum setting

• The characteristics are for when the distance where the received light output reaches its peak is set to 30, 50, and 100 mm using the distance adjuster. Received light output peak: 50 mm Distance (mm) Operating level Receiver output (mV) 100 0.5 0.3 0 44 5220 28 36 Setting distance Set distance (mm) Excess Gain Ratio (times) Operating voltage Standard sensing object (white paper) Standard sensing object (black carbon) 2.0 1.5 1.0 0.5 0 100 150 20050 8020 Load current (mA) Residual voltage (V)

Output circuit Timing charts Model Wire color Power polarity E3S Brown + Light-ON Blue 0 V Brown 0 V Dark-ON Blue + Brown *1 12 to 24 VDC 0 V Load 1 (relay) Load 2 Black Blue *1 1.5 to 4 mA Z Photo- electric Sensor main circuit Stability indicator (green) Light indicator (red) Z: Zener diode (Vz = 30 V) *1: Reverse the polarity of the power supply to switch the operating mode. *2: Voltage output (when connecting transistor circuit) Incident light No incident light ON OFF ON OFF Operate Reset H L Light indicator (red) Output transistor Load 1 (e.g., relay) Load 2 (Between brown and black) (Between blue and black) Brown *1 12 to 24 VDC 0 V Load 1 (relay) Load 2 Black Blue *1 1.5 to 4 mA Z Photo- electric Sensor main circuit Stability indicator (green) Light indicator (red) Z: Zener diode (Vz = 30 V) *1: Reverse the polarity of the power supply to switch the operating mode. *2: Voltage output (when connecting transistor circuit) Incident light No incident light ON OFF ON OFF Operate Reset H L Light indicator (red) Output transistor Load 1 (e.g., relay) Load 2 (Between brown and black) (Between blue and black)

• With Relay Load Through-beam Sensors Light Interrupted and Load Operating for E3S-2E4 (41) and -5E4 (41) (42) Note: The indicator will function as a light indication if the Emitter's pink wire is connected to the Receiver's black wire as indicated by the dotted line. The indicator will function as a power indicator if the Emitter's pink wire is connected to the Emitter's blue wire. Retro-reflective Sensors Light Interrupted and Load Operating for E3S-R2E4 (41)
• Connection with S3D2 Sensor Controller Reverse operation is possible using the signal input switch on the S3D2. Load Pink Blue Blue Brown Brown Black Receiver 80 mA max. 12 to 24 V

0 V0 V

Black80 mA max. 12 to 24 V 0 V Sensing method Through-beam Reflective Connection method 123 654 10 11 12 987 Blue Blue Brown Brown Black Receiver

0 V12 V

• Adjusting the E3S-LS10XE4 Convergent-reflective Sensor 1. Attach the distance adjustment scale as shown in the figure and set it where the * mark is equal to the sensing distance. 2. Turn the distance adjuster until the red spot is at point (center of the distance adjustment scale). 3. Remove the distance adjustment scale once the distance has been adjusted. Put a sensing object in place, and then adjust the sensitivity.
• Adjusting the E3S-LS20XE4 Convergent-reflective Sensor Adjustment Method 1 Use this method if the sensing object is more reflective than the background. 1. Set the sensitivity adjuster to the center as shown in the figure. 2. Turn the distance adjuster counterclockwise until it is fully turned (L to S). 3. Position the sensing object. 4. Slowly turn the distance adjuster clockwise (S to L). 5. Eventually the LIGHT (red) indicator will light. Turning the adjuster further will light the STABILITY (green) indicator. Leave the distance adjuster at this level. 6. Adjust the sensitivity in this state. Adjustment Method 2 Use this method if the background is more reflective than the sensing object. 1. Set the sensitivity adjuster to the center as shown in the figure. 2. Turn the distance adjuster clockwise until it is fully turned (S to L). 3. Remove the sensing object. 4. Slowly turn the distance adjuster counterclockwise (L to S). 5. Eventually the LIGHT (red) indicator will light. Turning the adjuster further will light the STABILITY (green) indicator. 6. Adjust the sensitivity in this state. Distance adjustment scale Align the distance adjustment scale with the groove on the Sensor. E3S-LS10XE4 A Distance adjuster Sensitivity adjustment A Distance adjuster Sensing object Center Background object Distance adjuster Sensing object Center Background object

This product is not designed or rated for ensuring safety of persons. Do not use it for such purposes. Do not use the product in atmospheres or environments that exceed product ratings. If the sensing object has a metallic or shiny surface, the E3S- R may not detect it properly. To avoid this situation, place the sensing object so that it is not at right angles to the Photoelectric Sensor.

• Attaching the E39-S Slit
• The Slit can be fitted vertically or horizontally as indicated by the dotted line. Make sure that Slits for the Emitter and the Receiver are fitted in the same orientation.
• Place the packing in the supporter and hook the claws on the indentations in the Sensor head.
• If the supporter is contacting the mounting surface, insert a spacer to separate it. (Refer to Slit Dimensions.)
• An operating position accuracy of 0.1 mm max. can be achieved for a Through-beam Sensor without Slits. Sensor with Slits
• Sensors with Open-collector Outputs Sensors with Open-collector Outputs The model numbers are as follows: Example: E3S-DS10E4 (E type) E3S-DS1C4 (C type) E3S-DS1B4 (B type) C4 (C41, C42) Sensors C4 (B41, B42) Sensors Note 1. Only C42 models with die-cast cases are available. 2. The Emitter for a Through-beam C4-type Sensor is the same as the Emitter for an E4-type Sensor. (E.g., E3S-5LE4) 3. When a C- or B- type Sensor experiences a load short-circuit or overload, the output transistor will be turned OFF. Check the load conditions before turning the power back ON. WARNING Precautions for Correct Use Applicable Photoelectric Sensor E3S-5E4, -5E41 (42) E3S-2E4, -2E41 Model E39-S1 E39-S2 Item Slit width 0.5 mm 1 mm 2 mm 4 mm 0.5 mm 1 mm 2 mm Sensing distance 230 mm 580 mm 1200 mm 2500 mm 170 mm 420 mm 820 mm Sensing object 0.5 mm 1 mm 2 mm 4 mm 0.5 mm 1 mm 2 mm Degree of protection IP60 Create an angle. Glossy surface Sensing object 10° to 20° Reflector Supporter Cut-out section Claws Slit Sensor head Indentation Protrusion Packing B Packing A Type Output type Output transistor Rated current output Switching current Output protection circuit E Voltage or current output NPN 1.5 to 4m A 80 mA max. (sinking) Provided against an increase in the residual output voltage C Open- collector output NPN --- 100 mA max. (sinking) Provided: Output transistor cutoff B Open- collector output PNP --- 100 mA max. (sourcing) Provided: Output transistor cutoff Brown * 0 V Load (relay) Black (output) Blue * Photo- electric Sensor main circuit Z 2.2 Ω Brown * 0 V Load (relay) Black (output) Blue * Photo- electric Sensor main circuit Z2.2 Ω Z: Zener diode (Vz = 30 V) * The operation mode depends on the wiring of the brown and blue lines.

• Sensors with Different Orientations The E3S-5, E3S-DS30, and E3S-R2 that sense in different directions can be made. Sensing method Sensing direction Through- beam E3S-5E43 E3S-5E44 Retro- reflective Diffuse- reflective E3S-DS30E43 E3S-R2E43 Emitter Receiver Emitter Receiver

(Unit: mm) Dimensions Unless otherwise specified, the tolerance class IT16 is used for dimensions in this data sheet. General-purpose Sensors Note: Models numbers for Through-beam Sensors (E3S-@E4, E3S-@E41) are for sets that include both the Emitter and Receiver. The model number of the Emitter is expressed by adding "L" to the set model number (example: E3S-2LE4), the model number of the Receiver, by adding "D" (example: E3S-2DE4.) Refer to Ordering Information to confirm model numbers for Emitter and Receivers. 15.4 3.2 9 16.716.7 16.2 25.1 1.2 2.7 18.8 Indicator 9.9 (50) 16 9 43.2 5.5 20 11.4 Two, M3 a*1 Lens: 7 dia. E39-L3 6 dia. 12.8 dia. Sensitivity adjuster*2 4-dia. vinyl-insulated round cable with 2/3 conductors (Conductor cross section: 0.2 mm2, Insulator diameter: 1.1 mm), Standard length: 2 m Weight: Emitter and Receiver, 80 g each *1 The mounting bracket can also be used on side a. *2 Receiver only. E3S-2E4 15.4 3.2 9 16.716.7 25.1 1.2 18.8 32.3 (50) 8.3 9 43.2 5.5 20 11.4 Indicator Two, M3 a*1 Lens: 7 dia. 6 dia. 12.8 dia. Sensitivity adjuster*2 *1 The mounting bracket can also be used on side a. *2 Receiver only. 4-dia. vinyl-insulated round cable with 2/3 conductors (Conductor cross section: 0.2 mm2, Insulator diameter: 1.1 mm), Standard length: 2 m Weight: Emitter and Receiver, 80 g each E3S-2E41 4.2 5 1.96.5 4.220 22.2 20.4 (32) 1.6 2.1R 25.4 (67) 11 13 7 2.1R Indicator E39-L6 a*1 Lens: 11 dia. 13 dia. Sensitivity adjuster*2 4-dia. vinyl-insulated round cable with 2/3 conductors (Conductor cross section: 0.2 mm2, Insulator diameter: 1.1 mm), Standard length: 2 m Weight: Emitter and Receiver, 155 g each Two, M4 slotted hexagonal bolts 1 The mounting bracket can also be used on side a. *2 Receiver only. E3S-5E4 4.2 5 1.96.5 4.220 22.2 20.4 (32) 1.6 2.1R 2.1R 18.6 25.4 (75) 11 13 7 Indicator a*1 Lens: 11 dia. 13 dia. Sensitivity adjuster*2 4-dia. vinyl-insulated round cable with 2/3 conductors (Conductor cross section: 0.2 mm2, Insulator diameter: 1.1 mm), Standard length: 2 m Weight: Emitter and Receiver, 165 g each Two, M4 slotted hexagonal bolts 1 The mounting bracket can also be used on side a. *2 Receiver only. E3S-5E41

15.4 3.2 9 16.7 10.5 (50) 16 9 43.2 5.5 20 11.4 16.7 16.8 27.3 1.2 Indicator Two, M3 a*Lens: 7 x 13 6 dia. 12.8 dia. Sensitivity adjuster 4-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.2 mm2, Insulator diameter: 1.1 mm), Standard length: 2 m Weight: Approx. 80 g Emitter Receiver * The mounting bracket can also be used on side a. E3S-DS10E4 115 15.4 3.2 9 16.7 29.5 (50) 5.5 43.2 5.5 20 16.7 27.3 1.2 Indicator Two, M3 Lens: 7 x 13 Sensitivity adjuster Emitter Receiver 4-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.2 mm2, Insulator diameter: 1.1 mm), Standard length: 2 m Weight: Approx. 80 g 6 dia. 12.8 dia. * The mounting bracket can also be used on side a. E3S-DS10E41 20.4 (32) 6.5 4.2 2.1R 2.1R 4.2 25.4 39 1.9 (67) 13 711 7.1 22.2 520 24.9 1.6 Indicator Two, M4 slotted hexagonal bolts Lens: 10 x 15 13 dia. Sensitivity adjuster Emitter Receiver 4-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.2 mm2, Insulator diameter: 1.1 mm), Standard length: 2 m Weight: Approx. 155 g * The mounting bracket can also be used on side a. E3S-R2E4 E3S-DS30E4 18.6 (32) 22.2 6.5 4.2 2.1R 2.1R 4.2 25.4 (75) 13 711 520 1.6 20.4 1.9 Indicator Two, M4 slotted hexagonal bolts Lens: 10 x 15 13 dia. Sensitivity adjuster Emitter Receiver 4-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.2 mm2, Insulator diameter: 1.1 mm), Standard length: 2 m Weight: Approx. 165 g * The mounting bracket can also be used on side a. E3S-R2E41 E3S-DS30E41

Note: Models numbers for Through-beam Sensors (E3S-5E42) are for sets that include both the Emitter and Receiver. The model number of the Emitter is expressed by adding "L" to the set model number (example: E3S-5LE42), the model number of the Receiver, by adding "D" (example: E3S-5DE42.) Refer to Ordering Information to confirm model numbers for Emitter and Receivers. 1311 (32) 1.6 (32) 22.2 1.6 22.2 6.5 4.2 2.1R 2.1R 4.2 25.4 39 1.9 (75) 24 7 13 dia. 6.5 4.2 2.1R 2.1R 4.2 25.4 18.6 18.6 1.9 (75) 20.4 20.4 10.2 10.2 Indicator Two, M4 slotted hexagonal bolts Lens: 11 dia. 13 dia. Sensitivity adjuster Emitter Receiver 4-dia. vinyl-insulated round cable with 2/3 conductors (Conductor cross section: 0.2 mm2, Insulator diameter: 1.1 mm), Standard length: 2 m Weight: Approx. 165 g Two, M4 slotted hexagonal bolts Lens: 11 dia. Indicator * The mounting bracket can also be used on side a. E3S-5E42 4.2 5 1.96.5 4.220 13 dia. 22.2 10.2 20.4 (32) 1.6 7.1 21.5 18.6 2.1R 25.4 (75) 11 13 7 2.1R Indicator Two, M4 slotted hexagonal bolts Sensitivity adjuster Emitter Receiver 4-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.2 mm2, Insulator diameter: 1.1 mm), Standard length: 2 m Weight: Approx. 165 g Lens: 10 x 15 E3S-R2E42 E3S-DS30E42 20 6 4.9 2.1R 26 11 3 4.2 24 4.2 1.6 Indicator Two, M4 slotted hexagonal bolts Sensitivity adjuster Emitter Receiver 4-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.2 mm2, Insulator diameter: 1.1 mm), Standard length: 2 m Weight: Approx. 225 g Lens: 14 x 47 Distance adjuster Optical axis Two, 4.4 dia. 8 dia. * The mounting bracket can also be used on side a. E3S-LS10XE4 E3S-LS20XE4 Two, M3 Mounting Hole Dimensions E3S-2E4 E3S-2E41 E3S-DS10E4 E3S-DS10E41 E3S-LS10XE4 E3S-LS20XE4 Two, M4 25.4 E3S-5E4 E3S-5E41 E3S-R2E4 E3S-R2E41 (42) E3S-DS30E4 E3S-DS30E41 (42)

Accessories (Order Separately) 4.2 10.2 20.2 25.4 5.6 2.1R 4.2 25.4 92.1 82.1 9 29.1 25.4 Two, M4 slotted hexagonal bolts Two, M4 Mounting Holes Applicable models: E3S-5E41 E3S-R2E41 E3S-DS30E41 Special Mounting Bracket E39-L2 3.2 15.70 2033 3.2 68.5 60.8 20 28.54 Two, M3 Mounting Holes Applicable models: E3S-2E41 E3S-DS10E41 Two, M3 E39-L4 40.3 5259.9 2.7 1.6 7.5 Two, 3.5 dia. Material: Reflective surface: Acrylic Rear surface: ABS Reflector E39-R1 (Provided with the E3S-R2E4(41) Retro-reflective Reflector.) 13 dia.9.3 dia. Applicable models: Provided with the E3S-5E4(41), E3S-DS30E4(41), E3S-R2E4(41). Note: Cannot be used for the E3S-DS10E4 (41). Sensitivity Adjuster (Provided) E39-G1

17.8 10.5 1.8 1.2 17.9 (16.7) E39-S2 *Spacer Slit (Order Separately) E39-S2 Note 1. Three sets of slits are provided: 6.5 x 0.5 mm, 6.5 x 1 mm and 6.5 x 2 mm 2. One set consists of two slits, one each for the Emitter and Receiver. Slit E39-S2 Applicable Sensors E3S-2E4 E3S-2E41 8.3 2.1 22.4 1.2 23.4 (22.2) E39-S2 *Spacer E39-S1 Note 1. Four sets of slits are provided: 11 x 0.5 mm, 11 x 1 mm, 11 x 2 mm, and 11 x 4 mm 2. One set consists of two slits, one each for the Emitter and Receiver. Slit E39-S1 Applicable Sensors E3S-5E4 E3S-5E41 Note: The dimensions in parentheses are for when the Spacer is not used. * With the E3S-2E4 (41), use the Spacer as shown in the figure above so that the supporter and Mounting Bracket will not be struck when the optical axis is adjusted. With the E3S-5E4 (41), the Spacer is not particularly required. Use the Spacer, however, to directly mount both the E3S-2E4 (41) and -5E4 (41). In the interest of product improvement, specifications are subject to change without notice.

Read and Understand This Catalog Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranty and Limitations of Liability WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. LIMITATIONS OF LIABILITY OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR. Application Considerations SUITABILITY FOR USE OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the products. At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:  Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.  Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations.  Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. PROGRAMMABLE PRODUCTS OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof. Disclaimers CHANGE IN SPECIFICATIONS Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchased products. DIMENSIONS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown. PERFORMANCE DATA Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability. ERRORS AND OMISSIONS The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading errors, or omissions. 2011.9 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2011 All Right Reserved.