E3F3-D11

E3F3 OMRON | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 8

Technical content

E3F3 Photoelectric Sensor 1 Photoelectric Sensor E3F3 Threaded Cylindrical Photoelec- tric Sensor with Built-in Amplifi- er for Use as an Optical Proximity Sensor High Noise-immunity with Photo-IC Technology

• Up-to-date photo-IC to increase noise immunity.  M18 DIN-sized cylindrical housing, ABS resin case.  Long sensing distance (30 cm) with sensitivity adjus- tor for diffuse type.  Short-circuit and reverse connection protection. <READ AND UNDERSTAND THIS CATALOG> Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments.

Ordering Information

Sensing distance Operating modes Model Plastic housing Metal housing NPN output PNP output NPN output PNP output Through- beam Pre-wired Light-ON E3F3-T11 E3F3-T31 E3F3-T11M E3F3-T31M M12 CN E3F3-T16 E3F3-T36 E3F3-T16M E3F3-T36M Pre-wired Dark-ON E3F3-T61 E3F3-T81 E3F3-T61M E3F3-T81M M12 CN E3F3-T66 E3F3-T86 E3F3-T66M E3F3-T86M Retrore- flective Pre-wired Light-ON Non-po- larized E3F3-R11 E3F3-R31 E3F3-R11M E3F3-R31M M12 CN E3F3-R16 E3F3-R36 E3F3-R16M E3F3-R36M Pre-wired Dark-ON E3F3-R61 E3F3-R81 E3F3-R61M E3F3-R81M M12 CN E3F3-R66 E3F3-R86 E3F3-R66M E3F3-R86M Pre-wired Light-ON Polarized E3F3-R12 E3F3-R32 E3F3-R12M E3F3-R32M M12 CN E3F3-R17 E3F3-R37 E3F3-R17M E3F3-R37M Pre-wired Dark-ON E3F3-R62 E3F3-R82 E3F3-R62M E3F3-R82M M12 CN E3F3-R67 E3F3-R87 E3F3-R67M E3F3-R87M Diffuse reflective Pre-wired Light-ON E3F3-D11 E3F3-D31 E3F3-D11M E3F3-D31M M12 CN E3F3-D16 E3F3-D36 E3F3-D16M E3F3-D36M Pre-wired Dark-ON E3F3-D61 E3F3-D81 E3F3-D61M E3F3-D81M M12 CN E3F3-D66 E3F3-D86 E3F3-D66M E3F3-D86M Pre-wired Light-ON E3F3-D12 E3F3-D32 E3F3-D12M E3F3-D32M M12 CN E3F3-D17 E3F3-D37 E3F3-D17M E3F3-D37M Pre-wired Dark-ON E3F3-D62 E3F3-D82 E3F3-D62M E3F3-D82M M12 CN E3F3-D67 E3F3-D87 E3F3-D67M E3F3-D87M 5 m 3 m 2 m 100 mm 300 mm

2 E3F3 Photoelectric Sensor

■ Model Number Legend ■ Accessories (Order Separately) Note: E39-R1 is included in E3F3-R@@ and E3F3-R@@M. Specifications ■ Ratings/Characteristics D: Reflector L: Emitter None: Reflective model M: Metal housing None: Plastic housing 1/2/3/4: Pre-wired 6/7/8/9: M12 connector 1: NPN L/ON 3: PNP L/ON 6: NPN D/ON 8: PNP D/ON T: Through-beam R: Retroreflective D: Diffuse reflective Reflector E39-R1, E39-R3 Reflector (tape type) E39-RS1, E39-RS2, E39-RS3 Lens Cap E39-F31 Mounting Bracket Y92E-B18 Item Sensing method Through-beam Retroreflective Diffuse reflective NPN output E3F3-T11 E3F3-R11 E3F3-R12 E3F3-D11 E3F3-D12 E3F3-T16 E3F3-R16 E3F3-R17 E3F3-D16 E3F3-D17 E3F3-T61 E3F3-R61 E3F3-R62 E3F3-D61 E3F3-D62 E3F3-T66 E3F3-R66 E3F3-R67 E3F3-D66 E3F3-D66 PNP output E3F3-T31 E3F3-R31 E3F3-R32 E3F3-D31 E3F3-D32 E3F3-T36 E3F3-R36 E3F3-R37 E3F3-D36 E3F3-D37 E3F3-T81 E3F3-R81 E3F3-R82 E3F3-D81 E3F3-D82 E3F3-T86 E3F3-R86 E3F3-R87 E3F3-D86 E3F3-D87 Sensing distance 5 m 3 m (Non-polarized when us- ing E39-R1) 2 m (Non-polarized when us- ing E39-R1) 100 mm 300 mm Standard sensing object Opaque object: 11 mm min. Opaque object: 56 mm min. 100 × 100 mm white mat paper Hysteresis --- 20% max. of sensing distance Light source (wavelength) Infrared LED (860 mm) Red LED (680 mm) Infrared LED (860 mm) Power supply voltage 12 to 24 VDC±10%, ripple (p-p): 10% max. Current consumption 45 mA max. (light source and receiver) 25 mA max. Control output Open collector transistor output, 100 mA max., residual voltage: 1 V max. at 100 mA Protective circuit Output short-circuit protection, DC power supply reverse polarity protection Response time 1.0 ms max. Sensitivity adjustment --- Single-turn adjuster Ambient illumination Incandescent lamp: 3,000 lx max., Sunlight: 10,000 lx max. Ambient temperature Operating: –25 to 55 °C (with no icing or condensation) Storage: –30 to 70 °C (with no icing or condensation) Ambient humidity Operating: 45% to 85% (with no condensation) Storage: 35% to 95% (with no condensation) Insulation resistance 20 MΩ min. (at 500 VDC) between current carry parts and case Dielectric strength 1,000 VAC at 50/60 Hz for 1 min between current carry parts and case Vibration resistance (destruction) 10 to 55 Hz, 1.5-mm double amplitude for 1 hour each in X, Y, and Z directions Shock resistance (destruction) 500 m/s 2 for 3 times each in X, Y, and Z directions Degree of protection IEC 60529 IP66 Connecting method Pre-wired (standard length: 2 m)/M12 connector Indicators Operation indicator (orange) [Power indicator of emitter (orange)] Weight Pre-wired Metal: 200 g max. Metal housing: 100 g max. Plastic: 170 g max. Plastic housing: 85 g max. M12 connector Metal: 120 g max. Metal housing: 60 g max. Plastic: 40 g max. Plastic housing: 20 g max. Packing Nylon bag Material Case Plastic: ABS, Metal: Nickel-brass Lens PMMA Accessories Screw nuts: ABS or Nickel-brass Accessories Screw nuts (4), Instruction sheet Screw nuts (2), E39-R1 reflector, Instruction sheet Screw nuts (2), Instruction sheet Screw nuts (2), Instruction sheet, Adjusting driver

E3F3 Photoelectric Sensor 3 Engineering Data Parallel Operating Range (Typical) Through-beam Models E3F3-T@1@/T@6@ Operating Range (Typical) Retroreflective Models E3F3-R@1@/R@6@+E39-R1 Retroreflective Models E3F3-R@2@/R@7@+E39-R1 Operating position Y (cm) Operating position Y(cm) Operating position Y(cm) Distance X (m) Distance X (m) Distance X (m) −40 −30 −20 −10 −10 61 0 1 2428 X YSensor Emitter 0.5 1 1.5 2 2.5 3 3.5 YSensor Reflector Diffuse-reflective Models E3F3-D@1@/D@6@ Diffuse-reflective Models E3F3-D@2@/D@7@ Excess gain ratio Distance (cm) 0 5 10 15 20 25 0.1 0.7 0.5 0.3 100 Excess Gain Ratio vs. Set Distance (Typical) Through-beam Models E3F3-T@1@/T@6@ Retroreflective Models E3F3-R@1@/R@6@+E39-R1 Retroreflective Models E3F3-R@2@/R@7@+E39-R1 Excess gain ratio Excess gain ratio Excess gain ratio Distance (m) Distance (m) Distance (m) 0.1 0.7 0.5 0.3 100 0.1 0.7 0.5 0.3 100 0 5 10 15 20 25 30 0123456 X Excess gain ratio Distance (cm) 0 20 40 60 80 100 120 0.1 0.7 0.5 0.3 100

30 Operating position Y (cm)

Distance X (cm) Diffuse-reflective Models E3F3-D@2@/D@7@ 20 40 60 80 100 120 Sensor X Y White paper (100 x 100 mm) Operating position Y (cm) Distance X (cm) Diffuse-reflective Models E3F3-D@1@/D@6@ 2 4 6 8 10 12 14 Sensor X Y White paper (100 x 100 mm) −10 123 4 0.1 100 0123 4 YSensor ReflectorX

4 E3F3 Photoelectric Sensor

■ NPN Output ■ PNP Output Object size (cm) Sensing distance (cm) Object size (cm) Sensing distance (cm) 0 5 10 15 20 25 30 0 100 150 200 250 300 350 400 450 0 5 10 15 20 25 30 SUS SUS Sensing Distance vs. Object Size (Typical) White paper Black paper White paper Black paper Model Output transistor status Timing chart Output circuit E3F3-T1@@ E3F3-R1@@ E3F3-D1@@ Light-ON E3F3-T6@@ E3F3-R6@@ E3F3-D6@@ Dark-ON Operation indicator (orange) Control output Load (relay) Incident light No incident light ON OFF ON OFF Operate Release (Between brown and black) Load Brown 100 mA max. (control output) Black Main circuit Operation indicator (Orange) ZD 12 to

24 VDC

(relay) ON OFF Operate Incident light No incident light Operation indicator (orange) ON OFF Release (Between brown and black) 100 mA max. (control output) Main circuit(Orange) Blue Black Load ZD 12 to Timing chart Output circuit E3F3-T3@@ E3F3-R3@@ E3F3-D3@@ Light-ON E3F3-T8@@ E3F3-R8@@ E3F3-D8@@ Dark-ON Operation indicator (orange) Control output Load (relay) Incident light No incident light ON OFF ON OFF Operate Release (Between blue and black) Main circuit Operation indicator (Orange) 100 mA max. (control output) Blue Black Load ZD Brown 12 to (relay) ON OFF Operate Incident light No incident light Operation indicator (orange) ON OFF Release (Between blue and black) Main circuit Operation indicator (Orange) 100 mA max. (control output) Blue Black Load ZD Brown 12 to

E3F3 Photoelectric Sensor 5 Dimensions Note:All units are in millimeters unless otherwise indicated. ■ Sensors Note:Pre-wired Cord: Polyvinyl chloride-covered cord, 4-mm dia. (18/0.12), Standard length: 2 m Emitter: 2-conductor (brown and blue) Receiver and Reflective model: 3-conductor (brown, blue, and black) M12 connector: 1: +V, 2: NC, 3: 0 V, 4: Output Plastic housing Metal housing Pre-wired M12 connector Pre-wired M12 connector 49.4 42.4 M18 Sensitivity adjuster Operation indicator 4 dia. (See note.) 16.6 dia. E3F3-D@2 49.4 42.4 M18 Sensitivity adjuster Operation indicator 4 dia. (See note.) 16.6 dia.24 27.7 E3F3-D@2M 73.1 49.4 42.4 M18 Sensitivity adjuster Operation indicator M12 16.6 dia. E3F3-D@7 73.1 49.4 42.4 M18 Sensitivity adjuster Operation indicator M12 16.6 dia. 27.7 E3F3-D@7M 42.4 M18 Operation indicator 4 dia. (See note.) 16.6 dia. E3F3-T@1 E3F3-R@1 E3F3-R@2 E3F3-D@1 42.4 M18 Operation indicator 4 dia. (See note.) 16.6 dia. 27.7 E3F3-T@1M E3F3-R@1M E3F3-R@2M E3F3-D@1M 73.1 42.4 M18 Operation indicator 16.6 dia. M12 E3F3-T@6 E3F3-R@6 E3F3-R@7 E3F3-D@6 73.1 42.4 M18 Operation indicator 16.6 dia. M12 27.7 E3F3-T@6M E3F3-R@6M E3F3-R@7M E3F3-D@6M

6 E3F3 Photoelectric Sensor

■ Accessories (Order Separately) E39-R1 Retroreflector 7.5 2.7 Two, 3.5 dia. 59.9 40.3 E39-R3 Retroreflector E39-RS1 Retroreflector E39-RS2 Retroreflector 34.8 19.3 Two, M3 2.6 1.2 34 38 41.8 10.1 25.4+0.1 1.2 Two, M3 0.2 1.2 105 34R25.4 16 Two, 3.2 dia. 20 0.2 0.2 14513.7 29 3.4 R20 4.5 3.4 18.45 28 22.9 3.4 Adhesive side 25.4 Mounting Bracket for E39-K3 (Sold Together) E39-RS3 Retroreflector Adhesive tape side Adhesive tape side Adhesive tape side Material: Acrylic resin Material: Acrylic resin Material: Acrylic resin

E3F3 Photoelectric Sensor 7 Precautions If the input/output lines of the photoelectric sensor are placed in the same conduit or duct as power lines or high-voltage lines, the photo- electric sensor could be induced to malfunction, or even be dam- aged, by electrical noise. Separate the wiring, or use shielded lines as input/output lines to the photoelectric sensor. Do not subject the photoelectric sensor to excessive shock when mounting, in keeping with IP66 standards. When you use the photoelectric sensor in the vicinity of an inverter motor, be sure to connect the protective ground wire of the motor to ground. Failure to ground the motor may result in malfunction of the sensor. Mounting Do not exceed a torque of 20 kgf·cm (2.0 N·m) when tightening mounting nuts. !WARNING The E3F3 Photoelectric sensor is not a safety component for en- suring the safety of people as defined by EC Directives (91/386 EEC) and covered by separate European standards or by any oth- er regulations or standards. Y92E-B18 Mounting Bracket E39-F31 Lens Cap Note: Hexagonal bolt: M5 x 32 Material: plastic 32+0.2 17 max. 18 dia.30 47 max. 20 dia. 4 max. Metal rim Gasket E3F3 Glass plate

READ AND UNDERSTAND THIS DOCUMENT Please read and understand this document before using the products. Please consult your OMRON representative if you have any qu estions or comments. WARRANTY OMRON’s exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. LIMITATIONS OF LIABILITY OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY , NEGLIGENCE, OR STRICT LIABILITY . In no event shall responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted . IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY , REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON’S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR. SUITABILITY FOR USE THE PRODUCTS CONTAINED IN THIS DOCUMENT ARE NOT SAFETY RATE D. THEY ARE NOT DESIGNED OR RATED FOR ENSURING SAFETY OF PERSONS, AND SHOULD NOT BE RELIED UPON AS A SAFETY COMPONENT OR PROTECTIVE DEVICE FOR SUCH PURPOSES. Please refer to separate catalogs for OMRON's safety rated products. OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer’s application or use of the product. At the customer’s request, OMRON will provide applicable third party certification documents identifying ratings and limitation s of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exh austive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:

• Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described i n this document.
• Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations.
• Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. PERFORMANCE DATA Performance data given in this document is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability. CHANGE IN SPECIFICATIONS Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when significant construction cha nges are made. However, some specifications of the product may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchased products. DIMENSIONS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown. ERRORS AND OMISSIONS The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assum ed for clerical, typographical, or proofreading errors, or omissions. PROGRAMMABLE PRODUCTS OMRON shall not be responsible for the user’s programming of a programmable product, or any consequence thereof. COPYRIGHT AND COPY PERMISSION This document shall not be copied for sales or promotions without permission. This document is protected by copyright and is intended solely for use in conjunction with the product. Please notify us before copying or reproducing this document in any manner, for any other purpose. If copying or transmitting this document to another, please copy or transmit it in its entirety. In the interest of product improvement, specifications are subject to change without notice. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. E365-E1-01 OMRON Corporation Industrial Automation Company Sensing Devices Division H.Q. Industrial Sensors Division Shiokoji Horikawa, Shimogyo-ku, Kyoto, 600-8530 Japan Printed in Japan 0605-?M (0605) (?)