MIC-3398 ADVANTECH | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Features
Supports Intel® Atom™ E38xx, Celeron N2930 and J1900 processors, up to quad-core at 2 GHz Up to 8GB of 1333MHz DDR3L memory 2.5" SATA-II HDD/SSD mounting site Comprehensive I/O capabilities: DVI, USB 3.0/USB 2.0, Gigabit Ethernet, Serial Ports, SATA-II/CFast 4HP single slot high with dual GbE interfaces or 8HP dual slot high with quad GbE interfaces PICMG 2.1 R2.0, PICMG 2.6 R1.0 compliant 6U CompactPCI Intel® Atom™ Processor Blade Introduction The MIC-3398 is a Low-Power 6U CompactPCI® CPU blade with best in class price/performance ratio tailored for applications that require a state of the art processor platform based on Intel® Architecture with full IO capability at an attractive cost point. The MIC-3398 supports Intel ® Atom™ E3845 and Celeron N2930, J1900 SoC (system on a chip) family previously codenamed Bay trail with a maximum of quad-core 2.00 GHz processing performance. Intel® Atom™ technology provides significant increases in performance and energy efficiency by using the 22nm Intel ® manufacturing process making it an ideal choice for control and workstation applications that require passive cooling with a power dissipation as low as 10W. Up to 8GB, dual channel 1333 MHz DDR3L memory with ECC support provide a high performance and robust memory interface for demanding applications. With built-in graphics based on Intel ® HD Graphics Technology this blade offers a significant improvement in graphics performance compared to previous generation platforms. Support for an onboard 2.5” SATA-II drive as well as CFast SSDs adds comprehensive mass storage support. On the system side, the MIC-3398 supports 32-bit, 33MHz and 64-bit, 66MHz PCI bus interfaces to a CompactPCI backplane. A rich set of I/O interfaces such as DVI-D, USB3.0/2.0, Gigabit Ethernet and RS-232/422/485 ports round off the feature set. In addition to the single slot wide (4HP) board offering, a dual slot wide (8HP) version of the blade offers additional network connectivity by increasing Gigabit Ethernet port count from two to four. Specifications Processor System CPU Intel® Atom™TM SoC (22nm) E38xx and Celeron N2930 and J1900, up to quad core 2.00 GHz BIOS AMI 8MByte SPI flash CompactPCI Interface J1 Connector 32-bit PCI local bus J2 Connector 64-bit PCI local bus Memory Technology DDR3L 1333 MHz, dual channel without ECC support Max. Capacity Up to 8GB Socket SODIMM x2 Graphic Controller Intel® Gen 7 Graphics Engines and media encode/decode engine; GPU Frequency 750MHz VRAM Shared memory up to 224 MB SDRAM Resolution High resolution display up to 2560 x 1600 @ 60Hz Ethernet Controller 2 or 4 Intel® I210AT single-port Gigabit Ethernet controllers (on PCIe x1 channel) Interface 10/100/1000Base-T Ethernet I/O Connector 2 RJ45 (4HP), 4 RJ45 (8HP) Storage Onboard HDD/SSD 1 2.5" mounting site (SATA-II) Channels 1 CFast socket (SATA-II) Front I/O USB3.0 1 type A USB2.0 3 type A DVI-D 1 COM 2 RS232/422/485 on D-Sub-9 LAN 2 10/100/1000 Mbps on RJ45 (4HP) 4 10/100/1000 Mbps on RJ45 (8HP) Front Panel LEDs 1x yellow for HDD, x1 green for Master/Drone mode, and x1 green for Power Buttons CPU reset button and power button Hardware Monitor HWM NCT7904 All product specifications are subject to change without notice. Last updated: 21-Jun-2017
www.advantech.com/productsOnline Download MIC-3398 Specifications (Cont.) Operating System Compatibility Win7/WES7, Win8/WES8, Linux, VxWorks 6.x(on request) Power Requirement CPU J1900 E3845 Voltage +3.3 V +5 V +3.3 V +5 V Current 0.02 A 3.91 A 0.02 A 4.02 A Maximum 0.07 W 20.41 W 0.07 W 20.94 W Physical Dimension (W x D) 233.35 x 160.0 mm Environment Operating Non-operating Temperature 0 ~ 55° C (32 ~ 122° F) -40 ~ 85° C (-40 ~ 185° F) Humidity 95 % @ 40° C, non-condensing 95 % @ 60° C, non-condensing Vibration (5-500 Hz) 2 Grms (without on-board 2.5" SATA HDD) 3.5 Grms Shock 10G 11ms Altitude 15000ft, 55° C, above sea level 40000 ft, -40° C, above sea level Regulatory Conformance FCC Class A, CE, RoHS
Ordering Information
Front I/O Main On-board Features DVI-D USB3.0 (type A) USB2.0 (type A) Ethernet (RJ45) Console (D-Sub9) CPU Installed SODIMM ECC Support CFast Socket Storage Channel SODIMM Sockets Front Panel MIC-3398A-M2E 1 1 3 2 2 J1900 1x 2GB No 1 1 SATA II 2 4HP MIC-3398B-M4E 1 1 3 4 2 J1900 1x 4GB No 1 1 SATA II 2 8HP For availability of other configurations please contact your Advantech representative. CPU Configuration Intel® CPU Model Number # Cores Freq. Turbo Freq. Cache CPU TDP ECC E3845 4 1.91 GHz Na 2 MB 10 W Yes N2930 4 1.83 GHz 2.16 GHz 2 MB 7. 5 W Yes J1900 4 2.00 GHz 2.42 GHz 2 MB 10 W No MIC-3398x-MxE Series 2.5" HDD/SSD mounting site Passive CPU Heatsink SODIMM sockets One CFast socket 2x D-Sub9 pin Consoles 1x USB 3.0 1x DVI-D 3 x USB 2.0 2x GbE RJ45 ports 4x GbE RJ45 ports