1426 CNC | Alldatasheet
Document overview
- Manufacturer or author: JosephChou
- PDF pages: 2
Technical content
PVC Insulated Marine Cable UL Style 1426 Type BC-5W2 UL Recognized: E333812 Tinned Copper Conductor Lead free PVC Insulation P/N: 1426-XX-1-XXX-0XX-1-TS Conductor Insulation Electrical Character Solid Diameter or Stranding Diameter AWG (mm²) Composition No/Diameter of Component Wire (mm) Insulation Nominal Thickness (mm) Approximate Overall Diameter (mm) Rated Voltage Maximum Conductor Resistance Ω/km 16AWG (1.31mm²) 26/0.254 Tinned Strands 0.85 3.2 ±0.15 600V 14.7 14AWG (2.08mm²) 41/0.254 Tinned Strands 0.85 3.6 ±0.15 600V 9.25
12 AWG
(3.31mm²) 65/0.254 Tinned Strands 0.85 4.1 ±0.2 600V 5.82 10AWG (5.26mm²) 105/0.254 Tinned Strands 0.85 4.7 ±0.2 600V 3.66 8AWG (8.37mm²) 7/24/0.254 Tinned Strands 1.30 6.7 ±0.4 600V 2.35 6AWG (13.3mm²) 7/38/0.254 Tinned Strands 1.65 8.5 ±0.4 600V 1.48 1. Surface Printing: MARINE CABLE NO. AWG E333812 (UL) BOAT CABLE BC-5W2 VW-1 105°C DRY 75°C WET 600V OIL RESISTANT PACIFIC LF Note: Marking may be some modification which must be complied with UL requirements. 2. Conductor: Tinned annealed copper strands wire 3. Rated Temperature: 105°C DRY 75°C WET 4. Insulation Material: Lead free PVC 5. The Lead Free cable can meet EU RoHS requirements.
- Electrical Properties: Insulation Resistance(15°C): 16AWG：Min. 210MΩ-km 14AWG：Min. 175MΩ-km 12AWG：Min. 150MΩ-km 10AWG：Min. 125MΩ-km 8AWG：Min. 130MΩ-km 6AWG：Min. 135MΩ-km Dielectric Test: 1500V/1min, No breakdown (10~16AWG) 2000V/1min, No breakdown (6~8AWG) Physical Properties Insulation： Tensile Strength: Min. 2000psi Elongation: Min. 150% Aging test: 136℃ for 168 hours Retention of Tensile Strength: Min. 75% Retention of Elongation: Min. 65% Deformation Test: The thickness of insulation shall not decrease more than 50% when subjected to a temperature of 121℃ for 1 hour and loaded a 400~750 grams (16~6AWG) weight. Heat Shock Test: No crack shall be shown on the surface after 1 hour at 121℃ when the finished wire tightly wound for 4 turns onto a mandrel of 2~16 mm (16~6AWG) diameter. Cold Bend Test: No crack shall be shown on the surface after 4 hours at -25℃ when the finished wire tightly wound for 5 turns onto a mandrel of 6~32 mm (16~6AWG) diameter. Oil Resistance Test: The retention of tensile strength and elongation of the insulation shall not be less than 50% of the unconditioned value after immersion of the finished wire in IRM 902 oil for 96 hours at 100℃. Flame Retardant Test: UL subject 758 VW-1 7. Packing: 6-8AWG: 100M/reel, 10-16AWG: 250M/ reel 8. Country of Origin: Taiwan P/N’s & COLORS 1426-XX-1-XXX-001-1-TS BLACK 1426-XX-1-XXX-002-1-TS WHITE 1426-XX-1-XXX-003-1-TS YELLOW 1426-XX-1-XXX-004-1-S RED 1426-XX-1-XXX-007-1-TS GREEN