E321126

B722_V01 TDK | Alldatasheet

Document overview

• Manufacturer or author: EPCOS AG
• PDF pages: 23

Technical content

SIOV metal oxide varistors Leaded varistors, SuperioR, S25 series Series/Type: B722* Date: January 2018 © EPCOS AG 2018. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company.

Round varistor element, leaded Coating: epoxy resin, flame-retardant to UL 94 V-0 Terminals: tinned wire

Features

High-energy SuperioR series E4 Wide operating voltage range 130 … 750 V RMS All types duty cycle @ 6 kV/ 3 kA = >10 pulses, according to IEC 62368-1; G.8.2 and IEC 60950-1; Annex Q, IEC 61051-2 UL approval to UL 1449 (file number E321126 – exception 580 V) Very high surge current rating up to 20 kA Approvals UL CSA IEC VDE Delivery mode Bulk (standard) For further details refer to chapter "Taping, packaging and lead configuration" for leaded varistors. General technical data Climatic category to IEC 60068-1 40/105/56 Operating temperature to IEC 61051 40 ... +105 °C Storage temperature 40 ... +125 °C Electric strength to IEC 61051 ≥ 2.5 kVRMS Insulation resistance to IEC 61051 ≥ 100 MΩ Leaded varistors B722* SuperioR, S25 series Page 2 of 23Please read Cautions and warnings and Important notes at the end of this document.

Electrical specifications and ordering codes Maximum ratings (TA = 105 °C) Ordering code Type (untaped) SIOV- VRMS V VDC V imax (8/20 µs) 1 time A In 1) (8/20 µs) 15 times A Wmax (2 ms) J Pmax W B72225S4131K101 S25K130E4R12 130 170 20000 10000 185 1.0 B72225S4141K101 S25K140E4R12 140 180 20000 10000 195 1.0 B72225S4151K101 S25K150E4R12 150 200 20000 10000 215 1.0 B72225S4171K101 S25K175E4R12 175 225 20000 10000 245 1.0 B72225S4231K101 S25K230E4R12 230 300 20000 10000 315 1.0 B72225S4251K101 S25K250E4R12 250 320 20000 10000 345 1.0 B72225S4271K101 S25K275E4R12 275 350 20000 10000 375 1.0 B72225S4301K101 S25K300E4R12 300 385 20000 10000 410 1.0 B72225S4321K101 S25K320E4R12 320 420 20000 10000 445 1.0 B72225S4381K101 S25K385E4R12 385 505 20000 10000 600 1.0 B72225S4421K101 S25K420E4R12 420 560 20000 10000 700 1.0 B72225S4441K101 S25K440E4R12 440 585 20000 10000 710 1.0 B72225S4461K101 S25K460E4R12 460 615 20000 10000 720 1.0 B72225S4511K101 S25K510E4R12 510 670 20000 10000 750 1.0 B72225S4551K101 S25K550E4R12 550 745 20000 10000 780 1.0 B72225S4581K101 S25K580E4R12 580 780 20000 10000 800 1.0 B72225S4621K101 S25K625E4R12 625 825 20000 10000 855 1.0 B72225S4681K101 S25K680E4R12 680 895 20000 10000 940 1.0 B72225S4751K101 S25K750E4R12 750 1060 20000 10000 1025 1.0 1) Note: Nominal discharge current In according to UL 1449, 4th edition. Leaded varistors B722* SuperioR, S25 series Page 3 of 23Please read Cautions and warnings and Important notes at the end of this document.

Characteristics (TA = 25 °C) Ordering code Vv (1 mA) V ΔVv (1 mA) vc,max (ic) V ic A Ctyp (1 kHz) pF B72225S4131K101 205 ±10 340 150 3800 B72225S4141K101 220 ±10 360 150 3550 B72225S4151K101 240 ±10 395 150 3250 B72225S4171K101 270 ±10 455 150 2900 B72225S4231K101 360 ±10 595 150 2250 B72225S4251K101 390 ±10 650 150 2100 B72225S4271K101 430 ±10 710 150 1900 B72225S4301K101 470 ±10 775 150 1750 B72225S4321K101 510 ±10 840 150 1600 B72225S4381K101 620 ±10 1025 150 1250 B72225S4421K101 680 ±10 1120 150 1150 B72225S4441K101 715 ±10 1180 150 1100 B72225S4461K101 750 ±10 1240 150 1050 B72225S4511K101 820 ±10 1355 150 950 B72225S4551K101 910 ±10 1500 150 860 B72225S4581K101 940 ±10 1580 150 830 B72225S4621K101 1000 ±10 1650 150 780 B72225S4681K101 1100 ±10 1815 150 710 B72225S4751K101 1200 ±10 2000 150 650 Leaded varistors B722* SuperioR, S25 series Page 4 of 23Please read Cautions and warnings and Important notes at the end of this document.

Dimensional drawings Weight Nominal diameter mm VRMS V Weight g The weight of varistors in between these voltage classes can be interpolated. Dimensions Ordering code [e] ±1 mm a (typical) mm wmax mm thmax mm hmax mm lmin mm d ±0.05 mm Leaded varistors B722* SuperioR, S25 series Page 5 of 23Please read Cautions and warnings and Important notes at the end of this document.

Test Test methods/conditions Requirement Varistor voltage The voltage between two terminals with the specified measuring current applied To meet the specified value Clamping voltage The maximum voltage between two terminals with the specified standard impulse current (8/20 µs) applied. To meet the specified value Endurance at upper category temperature 1000 h at UCT After having continuously applied the maximum allowable AC voltage at UCT ±2 °C for 1000 h, the specimen shall be stored at room temperature and normal humidity for 1 to 2 h. Thereafter, the change of VV shall be measured. |ΔV/V (1 mA)| ≤10% Surge current derating, 8/20 µs 10 surge currents (8/20 µs), unipolar, interval 30 s, amplitude corresponding to derating curve for 10 impulses at 20 µs |ΔV/V (1 mA)| ≤10% (measured in direction of surge current) No visible damage Surge current derating, 2 ms 10 surge currents (2 ms), unipolar, interval 120 s, amplitude corresponding to derating curve for 10 impulses at 2 ms |ΔV/V (1 mA)| ≤10% (measured in direction of surge current) No visible damage Electric strength IEC 61051-1, test 4.9.2 Metal balls method, 2500 VRMS, 60 s The varistor is placed in a container holding 1.6 ±0.2 mm diameter metal balls such that only the terminations of the varistor are protruding. The specified voltage shall be applied between both terminals of the specimen connected together and the electrode inserted between the metal balls. No breakdown Leaded varistors B722* SuperioR, S25 series Page 6 of 23Please read Cautions and warnings and Important notes at the end of this document.

Test Test methods/conditions Requirement Climatic sequence The specimen shall be subjected to: a) dry heat at UCT, 16 h, IEC 60068-2-2, test Ba b) damp heat, 1st cycle: 55 °C, 93% r. H., 24 h, IEC 60068-2-30, test Db c) cold, LCT, 2 h, IEC 60068-2-1, test Aa d) damp heat, additional 5 cycles: 55 °C/25 °C, 93% r. H., 24 h/cycle, IEC 60068-2-30, test Db. Then the specimen shall be stored at room temperature and normal humidity for 1 to 2 h. Thereafter, the change of VV shall be measured. Thereafter, insulation resis- tance Rins shall be measured at V = 500 V. |ΔV/V (1 mA)| ≤10% Rins ≥100 MΩ Rapid change of temperature IEC 60068-2-14, test Na, LCT/UCT, dwell time 30 min, 5 cycles |ΔV/V (1 mA)| ≤5% No visible damage Damp heat, steady state IEC 60068-2-78, test Ca The specimen shall be subjected to 40 ±2 °C, 90 to 95% r. H. for 56 days without load / with 10% of the maxi- mum continuous DC operating voltage VDC. Then stored at room temperature and normal humidity for 1 to 2 h. Thereafter, the change of VV shall be measured. Thereafter, insulation resis- tance Rins shall be measured at V = 500 V (insulated varistors only). |ΔV/V (1 mA)| ≤10% Rins ≥100 MΩ Leaded varistors B722* SuperioR, S25 series Page 7 of 23Please read Cautions and warnings and Important notes at the end of this document.

Test Test methods/conditions Requirement Solderability IEC 60068-2-20, test Ta, method 1 with modified conditions for lead-free solder alloys: 245 °C, 3 s: After dipping the terminals to a depth of approximately 3 mm from the body in a soldering bath of 245 °C for 3 s, the terminals shall be visually examined. The inspection shall be carried out under adequate light with normal eyesight or with the assistance of a magnifier capable of giving a magnification of 4 to 10 times. The dipped surface shall be covered with a smooth and bright solder coating with no more than small amounts of scattered imperfections such as pinholes or un-wetted or de-wetted areas. These imperfections shall not be concentrated in one area. Resistance to soldering heat IEC 60068-2-20, test Tb, method 1A, 260 °C, 10 s: Each lead shall be dipped into a solder bath having a temperature of 260 ±5 °C to a point 2.0 to 2.5 mm from the body of the specimen, be held there for 10 ±1 s and then be stored at room temperature and normal humidity for 1 to 2 h. The change of VV shall be measured and the specimen shall be visually examined. |ΔV/V (1 mA)| ≤5% No visible damage Tensile strength IEC 60068-2-21, test Ua1 After gradually applying the force specified below and keeping the unit fixed for 10 s, the terminal shall be visually examined for any damage. Force for wire diameter: 0.6 mm = 10 N 0.8 mm = 10 N 1.0 mm = 20 N |ΔV/V (1 mA)| ≤5% No break of solder joint, no wire break Leaded varistors B722* SuperioR, S25 series Page 8 of 23Please read Cautions and warnings and Important notes at the end of this document.

Test Test methods/conditions Requirement Vibration IEC 60068-2-6, test Fc, method B4 |ΔV/V (1 mA)| ≤5% No visible damageFrequency range: Amplitude: Duration: Pulse: 10 … 55 Hz 0.75 mm or 98 m/s2 6 h (3 · 2 h) sine wave After repeatedly applying a single harmonic vibration according to the table above. The change of VV shall be measured and the specimen shall be visually examined. Bump IEC 60068-2-29, test Eb |ΔV/V (1 mA)| ≤5% No visible damagePulse duration: Max. acceleration: Number of bumps: Pulse: 6 ms 400 m/s2 4000 half sine Fire hazard IEC 60695-11-5 (needle flame test) Severity: vertical 10 s 5 s max. Note: UCT = Upper category temperature LCT = Lower category temperature Rins = Insulation resistance Leaded varistors B722* SuperioR, S25 series Page 9 of 23Please read Cautions and warnings and Important notes at the end of this document.

v = f (i) - for explanation of the characteristics refer to "General technical information", 1.6.3 A = Leakage current, B = Protection level } for worst-case varistor tolerances SIOV-S25 ... E4R12 Leaded varistors B722* SuperioR, S25 series Page 10 of 23Please read Cautions and warnings and Important notes at the end of this document.

Maximum surge current imax = f (tr, pulse train) For explanation of the derating curves refer to "General technical information", section 1.8.1 SIOV-S25K130 ... K750E4R12 Leaded varistors B722* SuperioR, S25 series Page 11 of 23Please read Cautions and warnings and Important notes at the end of this document.

Taping, packaging and lead configuration

1 EPCOS ordering code system

B722 or B723 10 S 2 271 K 1 0 1 Monolithic varistor Nominal disc diameter Design: F = Fail-safe varistor Q = EnergetiQ S = Leaded varistor T = ThermoFuse U = Disk type, SNF X = Disk type, SNF (AEC-Q200) Series: 0 = StandarD 1 = Automotive 2 = AdvanceD 3 = SuperioR 4 = SuperioR Max. AC operating voltage: 271 = 27 101 = 275 VAC 140 = 14 100 = 14 VAC 141 = 14 101 = 140 VAC Tolerance of varistor voltage: K = ±10% J = ±5% S = Special tolerance Lead configuration: 1 = Straight leads 2 thru 9 = Kinked form Packaging: 0 = Bulk, 1 thru 7 = Taping style Internal coding: 1 = Standard Leaded varistors B722* SuperioR, S25 series Page 12 of 23Please read Cautions and warnings and Important notes at the end of this document.

2 Taping and packaging of leaded varistors

Tape packaging for lead spacing = 5 fully conforms to IEC 60286-2, while for lead spacings = 7.5 and 10 the taping mode is based on this standard. 2.1 Taping in accordance with IEC 60286-2 for lead spacing 5.0 mm 2.2 Taping based on IEC 60286-2 for lead spacing 7.5 and 10 mm Leaded varistors B722* SuperioR, S25 series Page 13 of 23Please read Cautions and warnings and Important notes at the end of this document.

2.3 Tape dimensions (in mm)

= 5.0 Tolerance = 7.5 Tolerance = 10.0 Tolerance Remarks w max. max. max. see tables in each series th max. max. max. under "Dimensions" sprocket holes Δh 0 ±2.0 depends on s depends on s measured at Δp 0 ±1.3 0 ±2.0 0 ±2.0 top of compo- nent body force > 5 N H0 16.0 (18.0) ±0.5 16.0 (18.0) ±0.5 16.0 ±0.5 3) L1 0.5 max. 1) Taping with P 0 = 15.0 mm upon request 2) Applies only to uncrimped types 3) Applies only to crimped types (H 0 = 18 upon request) Leaded varistors B722* SuperioR, S25 series Page 14 of 23Please read Cautions and warnings and Important notes at the end of this document.

2.4 Taping mode

Example: B72210S0271K1 5 1 Digit 14 Digit 14 Taping mode Reel type Seating plane height H0 for crimped types mm Seating plane height H for uncrimped types mm Pitch distance mm

0 Bulk

1 G I 16 18 12.7 2 G2 I 18 12.7 3 G3 II 16 18 12.7 4 G4 II 18 12.7 5 G5 III 16 18 12.7 6 GA Ammo pack 16 18 12.7 7 G2A Ammo pack 18 12.7 Internal coding for special taping G6 III 18 12.7 G10 II 16 18 15.0 G11 II 18 15.0 G10A Ammo pack 16 18 15.0 G11A Ammo pack 18 15.0

2.5 Reel dimension

Dimensions (in mm) Reel type d f n w I 360 max. 31 ±1 approx. 45 54 max. II 360 max. 31 ±1 approx. 55 64 max. III 500 max. 23 ±1 approx. 59 72 max. If reel type III is not compatible with insertion equipment because of its large diameter, nominal disk diameter 10 mm and 14 mm can be supplied on reel II upon request (taping mode G3). Leaded varistors B722* SuperioR, S25 series Page 15 of 23Please read Cautions and warnings and Important notes at the end of this document.

2.6 Ammo pack dimensions

3 Lead configuration

Straight leads are standard for disk varistors. Other lead configurations as crimp style or cus- (non-standard) are differently crimped for technical reasons; the individual crimp styles are denot- ed by consecutive numbers (S, S2 through S5) as shown in the dimensional drawings below. The crimp styles of the individual types can be seen from the type designation in the ordering ta- bles.

3.1 Crimp style mode

Example: B72210S0271K 5 01 Digit 13 Digit 13 of ordering code Crimp style Figure

1 Standard, straight leads 1

2 S2 2

3 S3 3

5 S5 4

Leaded varistors B722* SuperioR, S25 series Page 16 of 23Please read Cautions and warnings and Important notes at the end of this document.

3.2 Standard leads and non-standard crimp styles

The basic dimensions in figure 1 to 5 are valid for types with either round or square (EnergetiQ series) component head. Standard, straight leads Non-standard, crimp style S2 Non-standard, crimp style S3 Figure 1 Figure 2 Figure 3 Non-standard, crimp style S5 Figure 4 Leaded varistors B722* SuperioR, S25 series Page 17 of 23Please read Cautions and warnings and Important notes at the end of this document.

3.3 Trimmed leads (non-standard)

Varistors with cut leads available upon request. Lead length tolerances: Straight leads +/ 0.8 mm Crimped leads +/ 0.5 mm Minimum lead length 3.0 mm Figure 5 Leaded varistors B722* SuperioR, S25 series Page 18 of 23Please read Cautions and warnings and Important notes at the end of this document.

1. EPCOS metal oxide varistors are designed for specific applications and should not be used for purposes not identified in our specifications, application notes and data books unless oth- erwise agreed with EPCOS during the design-in-phase. 2. Ensure suitability of SIOVs through reliability testing during the design-in phase. SIOVs should be evaluated taking into consideration worst-case conditions. 3. For applications of SIOVs in line-to-ground circuits based on various international and local standards there are restrictions existing or additional safety measures required. Storage 1. Store SIOVs only in original packaging. Do not open the package prior to processing. 2. Recommended storage conditions in original packaging: Storage temperature: 25 °C ... +45 °C, Relative humidity: <75% annual average, <95% on maximum 30 days a year. Dew precipitation: is to be avoided. 3. Avoid contamination of an SIOV's during storage, handling and processing. 4. Avoid storage of SIOVs in harmful environments that can affect the function during long-term operation (examples given under operation precautions). 5. The SIOV type series should be soldered after shipment from EPCOS within the time speci- fied: SIOV-S, -Q, -LS, -B, -SNF 24 months ETFV/ T series, -CU 12 months. Handling 1. SIOVs must not be dropped. 2. Components must not be touched with bare hands. Gloves are recommended. 3. Avoid contamination of the surface of SIOV electrodes during handling, be careful of the sharp edge of SIOV electrodes. Soldering (where applicable) 1. Use rosin-type flux or non-activated flux. 2. Insufficient preheating may cause ceramic cracks. 3. Rapid cooling by dipping in solvent is not recommended. 4. Complete removal of flux is recommended. 5. Temperatures of all preheat stages and the solder bath must be strictly controlled especially for T series (T14 and T20). Leaded varistors B722* SuperioR, S25 series Page 19 of 23Please read Cautions and warnings and Important notes at the end of this document.

1. Potting, sealing or adhesive compounds can produce chemical reactions in the SIOV ceramic that will degrade the component’s electrical characteristics. 2. Overloading SIOVs may result in ruptured packages and expulsion of hot materials. For this reason SIOVs should be physically shielded from adjacent components. Operation 1. Use SIOVs only within the specified temperature operating range. 2. Use SIOVs only within the specified voltage and current ranges. 3. Environmental conditions must not harm SIOVs. Use SIOVs only in normal atmospheric con- ditions. Avoid use in deoxidizing gases (chlorine gas, hydrogen sulfide gas, ammonia gas, sulfuric acid gas etc), corrosive agents, humid or salty conditions.Contact with any liquids and solvents should be prevented. Display of ordering codes for EPCOS products The ordering code for one and the same EPCOS product can be represented differently in data sheets, data books, other publications, on the EPCOS website, or in order-related documents such as shipping notes, order confirmations and product labels. The varying representations of the ordering codes are due to different processes employed and do not affect the specifications of the respective products. Detailed information can be found on the Internet under www.epcos.com/orderingcodes Leaded varistors B722* SuperioR, S25 series Page 20 of 23Please read Cautions and warnings and Important notes at the end of this document.

ic Current at which Vc, max is measured Ileak Leakage current imax Maximum surge current (also termed peak current) Imax Maximum discharge current In Nominal discharge current to UL 1449 LCT Lower category temperature Ltyp Typical inductance Pmax Maximum average power dissipation Rins Insulation resistance Rmin Minimum resistance TA Ambient temperature tr Duration of equivalent rectangular wave UCT Upper category temperature v Voltage Vclamp Clamping voltage vc, max Maximum clamping voltage at specified current ic VDC DC operating voltage Vjump Maximum jump start voltage vmax Maximum voltage Vop Operating voltage VRMS AC operating voltage, root-mean-square value VRMS, op, max Root-mean-square value of max. DC operating voltage incl. ripple current Vsurge Super imposed surge voltage VV Varistor voltage ΔVV Tolerance of varistor voltage WLD Maximum load dump Wmax Maximum energy absorption Lead spacing All dimensions are given in mm. The commas used in numerical values denote decimal points. Leaded varistors B722* SuperioR, S25 series Page 21 of 23Please read Cautions and warnings and Important notes at the end of this document.

The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application . These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule we are either unfamiliar with individual customer applicat ions or less familiar with them than the customers themselves. For these reasons, it is always ultim ately incumbent on the customer to check and decide whether a product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applicat ions in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third p arties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in c ertain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.tdk-electronics.tdk.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product d escriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of pro ducts. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to our General Terms and Conditions of Supply. 7. Our manufacturing sites serving the automotive business apply the IATF 16949 standard. The IATF certifications confirm our compliance with requirement s regarding the quality management system in the automotive industry. Referring to cust omer requirements and customer specific requirements (“CSR”) TDK always has and will continue to have the policy of respecting individual agreements. Even if IATF 16949 may appear to support the acceptance of unilateral requirements, we hereby like to emphasize that only requirements mutually agreed upon can and will be implemented in our Quality Management Syst em. F o r c l a r i f i c a t i o n purposes we like to point out that obligations from IATF 16949 shall only become legally binding if individually agreed upon.

1. The trade names EPCOS, CeraCharge, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CTVS, DeltaCap, DigiSiMic, ExoCore, FilterCap, FormFit, LeaXield, Min iBlue, MiniCell, MKD, MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PowerHap, PQSine, PQvar, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineF ormer, SIOV, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.tdk-electronics.tdk.com/trademarks. Release 2018-10