E2EQ-X7B4-M1TJ-IL2

E2EQ-X-ILX OMRON | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 8

Technical content

IO-Link Proximity Sensor (Spatter-resistant Models) E2EQ-@-IL@ IO-Link Makes Sensor Level Information Visible and Solves the Three Major Issues at Manufacturing Sites! A Proximity Sensor That Can Be Used in a Welding Spatter Environment.

• Downtime can be reduced.
• Notifies you of faulty parts and changing conditions in the Sensor in real time.
• The frequency of sudden failure can be decreased.
• Notifies you of objects being too far or too close.
• The efficiency of changeover can be improved.
• The batch check for individual sensor IDs significantly decreases commissioning time.
• The fluororesin coating provides exceptional spatter resistance.

Ordering Information

Sensors [Refer to Dimensions on page 6.] DC 3-wire IO-Link Models Note: Please contact your OMRON sales representative regarding the IO-Link setup file (IODD file). Accessories (Sold Separately) Sensor I/O Connectors (Models with Pre-wired Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.) Note: Refer to Sensor I/O Connector/Sensor Controller on your OMRON website for details. * There are also straight type/L- shape type combinations available. For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Be sure to read Safety Precautions on page 5. Appearance Sensing distance Connection method Cable specifications Operation mode Pin arrangement Baud rate Model M12 Pre-wired Models (2 m) PVC NO/NC switching --- COM2 E2EQ-X3B4-IL2 2M COM3 E2EQ-X3B4-IL3 2M M12 Pre-wired Smartclick Connector Models (0.3 m) 1: +V 3: 0 V 4: C/Q output COM2 E2EQ-X3B4-M1TJ-IL2 0.3M COM3 E2EQ-X3B4-M1TJ-IL3 0.3M M18 Pre-wired Models (2 m) --- COM2 E2EQ-X7B4-IL2 2M COM3 E2EQ-X7B4-IL3 2M M12 Pre-wired Smartclick Connector Models (0.3 m) 1: +V 3: 0 V 4: C/Q output COM2 E2EQ-X7B4-M1TJ-IL2 0.3M COM3 E2EQ-X7B4-M1TJ-IL3 0.3M M30 Pre-wired Models (2 m) --- COM2 E2EQ-X10B4-IL2 2M COM3 E2EQ-X10B4-IL3 2M M12 Pre-wired Smartclick Connector Models (0.3 m) 1: +V 3: 0 V 4: C/Q output COM2 E2EQ-X10B4-M1TJ-IL2 0.3M COM3 E2EQ-X10B4-M1TJ-IL3 0.3M Type Appearance Cable length Sensor I/O Connector model number Applicable Proximity Sensor model number Socket on one cable end 2 m XS5F-D421-D80-F E2EQ-X@B4-M1TJ-IL@ 5 m XS5F-D421-G80-F 2 m XS5F-D422-D80-F 5 m XS5F-D422-G80-F Socket and plug on cable ends * 2 m XS5W-D421-D81-F 5 m XS5W-D421-G81-F 2 m XS5W-D422-D81-F 5 m XS5W-D422-G81-F Shielded 3 mm 7 mm 10 mm Straight L-shape Straight/straight L-shape/L-shape

E2EQ-@-IL@ Ratings and Specifications DC 3-wire IO-Link Models Note: Please contact your OMRON sales representative regarding the IO-Link setup file (IODD file). *1. In the Standard I/O mode (SIO mode), use the product in a range that the green stability indication lamp is lit. (Although the lamp is turned off when the object detected has approached excessively, the detection performance is stable.) In the IO-Link mode, use the product in a range that the Byte1_bit4 for instability detection is zero. (Although the Byte1_bit5 for excessive proximity detection is one if the object detected has approached excessively, the detection performance is stable.) Please contact your OMRON sales representative regarding assignment of data. *2. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance. Size M12 M18 M30 Shielded Shielded Item Model E2EQ-X3B4-IL@ E2EQ-X7B4-IL@ E2EQ-X10B4-IL@ Sensing distance 3 mm ±10% 7 mm ±10% 10 mm ±10% Set distance *1 0 to 2.4 mm 0 to 5.6 mm 0 to 8 mm Differential travel 10% max. of sensing distance Detectable object Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on pages 3.) Standard sensing object Iron, 12 × 12 × 1 mm Iron, 18 × 18 × 1 mm Iron, 30 × 30 × 1m m Response frequency *2 1 kHz 0.5 kHz 0.4 kHz Power supply voltage 10 to 30 VDC (including 10% ripple (p-p)) Current consumption 20 mA max. Control output Load current 100 mA max. Residual voltage 2 V max. (Load current: 100 mA, Cable length: 2 m) Indicators *1 In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and stability indicator (green, lit) In the IO-Link mode: Operation indicator (orange, lit) and communication indicator (green, blinking at 1 s intervals) Operation mode PNP NO/NC switching type (Factory setting: NO) Refer to the timing charts under I/O Circuit Diagrams on page 70 for details. Protection circuits Power supply reverse polarity protection, output reverse polarity protection, surge suppressor, and output short-circuit protection Ambient temperature range Operating/Storage: -25 to 70°C (with no icing or condensation) Ambient humidity range Operating/Storage: 35% to 95% (with no condensation) Temperature influence ±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C Voltage influence ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range Insulation resistance 50 MΩ min. (at 500 VDC) between current-carrying parts and case Dielectric strength 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions Shock resistance Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions Degree of protection IEC 60529 IP67, in-house standards: oil-resistant Connection method Pre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models (Standard cable length: 0.3 m) Materials Case Fluororesin coating (Base material: brass) Sensing surface Fluororesin Clamping nuts Fluororesin coating (Base material: brass) Toothed washer Zinc-plated iron Main IO-Link functions Operation mode switching between NO and NC, self diagnosis enabling, excessive proximity judgment distance selecting, timer function of the control output and timer time selecting, instability output (IO-Link mode) ON delay timer time selecting function, monitor output, operating hours read-out, and initial reset Communication specifications IO-Link specification Ver 1.1 Baud rate -IL3: COM3 (230.4 kbps), -IL2: COM2 (38.4 kbps) Data length PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2) Minimum cycle time -IL3 (COM3): 1 ms, -IL2 (COM2): 2.3 ms Accessories Instruction manual

E2EQ-@-IL@ Engineering Data (Reference Value) Sensing Area E2EQ-X@B4 (-M1TJ) -IL@ Influence of Sensing Object Size and Material E2EQ-X3B4 (-M1TJ) -IL@ E2EQ-X7B4 (-M1TJ) -IL@ E2EQ-X10B4 (-M1TJ) -IL@ Monitor Output E2EQ-X3B4 (-M1TJ) -IL@ E2EQ-X7B4 (-M1TJ) -IL@ E2EQ-X10B4 (-M1TJ) -IL@ Distance Y (mm) Distance X (mm) E2EQ-X10 E2EQ-X7 E2EQ-X3 -20 -15 -10 -5 0 5 10 15 20 X Y @d t=1 mmX Side length of sensing object: d (mm) Distance X (mm) 3.5 2.5 1.5 0.5 0 5 10 15 20 25 30 35 Stainless steel (SUS304) Iron Aluminum Copper @d t=1 mmX 0 10 20 30 40 50 Side length of sensing object: d (mm) Iron Copper Stainless steel (SUS304) Aluminum Distance X (mm) @d t=1 mmX 01 0 3 0 20 40 50 60 Stainless steel (SUS304) Iron Aluminum Copper Side length of sensing object: d (mm) Distance X (mm) Distance X (mm) 250 230 210 190 170 150 130 110 Iron Aluminum Stainless steel (SUS304) Detection level @d=12 mm t=1 mm X Distance X (mm) 250 230 210 190 170 150 130 110 6 4 2 8 10 115 317 9 120 Iron Aluminum Stainless steel (SUS304) Detection level @d=18 mm t=1 mm X Distance X (mm) 250 230 210 190 170 150 130 110 8421 2 1 6 1 8 61 0 1 4 2 00 Iron Aluminum Stainless steel (SUS304) Detection level @d=30 mm t=1 mm X

E2EQ-@-IL@ I/O Circuit Diagrams Pre-wired Connector Model Connections * If the XS5W-D42@ -@81-F Connector which has a socket and plug on the cable ends is connected to the Sensor, this part will be a plug. Timing Chart Output circuit Model Connections E2EQ-X@B4-M1TJ-IL@ Sensing object (%) 100 0802 0 Non-sensing zone Unstable sensing zone Rated sensing distance Stable sensing zone Set position Proximity Sensor Excessive proximity judgment distance *7 ON OFF ON OFF ON OFF ON OFF Flashing (1 s cycle) ON OFF Flashing (1 s cycle) ON OFF IO-Link mode Standard I/O mode (SIO mode) *8 NC NO NC NO Operation mode*1 Stability indicator (green) Operation indicator (orange) ON OFF Control output *5 Stability indicator (green) Operation indicator (orange) ON OFF Control output *5 Comunication indicator (green) Operation indicator (orange) Control output *5 (Byte1_bit0) Instability detection *6 (Byte1_bit4) Excessive proximity detection (Byte1_bit5) Comunication indicator (green) Operation indicator (orange) Control output *5 (Byte1_bit0) Instability detection *6 (Byte1_bit4) Excessive proximity detection (Byte1_bit5) *3 *2 *4 *4*3 *1. The operation mode can be changed by the IO-Link communications. *2. If the excessive proximity diagnosis function using the IO-Link communications is disabled, the lamp is lit in this zone, too, in the Standard I/O mode (SIO mode). In the IO-Link mode, diagnosis is disabled (fixed to zero). *3. If the instability detection diagnosis function using the IO-Link communications is disabled, the lamp is lit in this zone, too, in the Standard I/O mode (SIO mode). In the IO-Link mode, diagnosis is disabled (fixed to zero). *4. If both the diagnosis functions of excessive proximity and instability detection using the IO-Link communications are disabled, the lamp is not lit in all the zones. *5. The timer function of the control output can be set up by the IO- Link communications. (It is able to select ON delay, OFF delay, or one-shot function and select a timer time of 1 to 4000 ms (T).) *6. The judgment time for the instability detection diagnosis can be selected by the IO-Link communications. (For the ON delay timer function, the setting can be selected from 0 (invalid), 10, 50, 100, 300, 500, or 1000 ms. *7. The judgment distance of the excessive proximity diagnosis function can be selected by the IO-Link communications. (The distance can be selected as a combination of the material of the object detected, such as iron, aluminum, or SUS and the judgment distance of approximately 10, 20, or 30%. However, it is not allowed to select a combination of aluminum and 30%.) *8. If using the product as a general sensor, it operates in the Standard I/O mode (SIO mode). ON-delay OFF-delay One Shot T T Sensing object Present Not present NO NC ON OFF ON OFF T T Sensing object Present Not present NO NC ON OFF ON OFF T T Sensing object Present Not present NO NC ON OFF ON OFF /PUF 1MFBTFDPOUBDUZPVS0.30/TBMFTSFQSFTFOUBUJWFSFHBSEJOH BTTJHONFOUPGEBUB C/Q Brown Black Blue Proximity sensor 10 to 30V DC Load C/Q C/Q Brown Black Blue Proximity sensor IO-Link master When using as a general sensor When using the Sensor connected to IO-Link Master Unit Brown (+V) White (not used) Black (Output) Blue (0V) E2EQ XS5F

E2EQ-@-IL@ Safety Precautions Be sure to read the precautions for all models in the website at: www.omron247.com. Warning Indications Meaning of Product Safety Symbols This product is not designed or rated for ensuring safety of persons either directly or indirectly. Do not use it for such purposes. Risk of explosion. Do not connect sensor to AC power supply. The following precautions must be observed to ensure safe operation. 1. Do not use the product in an environment where flammable or explosive gas is present. 2. Do not attempt to disassemble, repair, or modify the product. 3. Power Supply Voltage Do not use a voltage that exceeds the rated operating voltage range. Applying a voltage that is higher than the operating voltage range may result in damage or burnout. 4. Incorrect Wiring Be sure that the power supply polarity and other wiring is correct. Incorrect wiring may cause explosion or burnout. 5. Connection without a Load If the power supply is connected directly without a load, the internal elements may explode or burn. Be sure to insert a load when connecting the power supply. 6. Dispose of this product as industrial waste. Do not use this product under ambient conditions that exceed the ratings.

• Operating Environment 1. Do not install the product in the following locations. Doing so may result in product failure or malfunction. (1) Outdoor locations directly subject to sunlight, rain, snow, water droplets, or oil. (2) Locations subject to atmospheres with chemical vapors, in particular solvents and acids. (3) Locations subject to corrosive gases. 2. The Sensor may malfunction if used near ultrasonic cleaning equipment, high-frequency equipment, transceivers, cellular phones, inverters, or other devices that generate a high-frequency electric field. Please refer to the Precautions for Correct Use on the OMRON website (www.ia.omron.com) for typical measures. 3. Laying the Proximity Sensor wiring in the same conduit or duct as high-voltage wires or power lines may result in incorrect operation and damage due to induction. Wire the Sensor using a separate conduit or independent conduit. 4. Never use thinner or other solvents. Otherwise, the Sensor surface may be dissolved.
• Design Influence of Surrounding Metal When mounting the Sensor within a metal panel, ensure that the clearances given in the following table are maintained. Failure to maintain these distances may cause deterioration in the performance of the Sensor. (Unit: mm) Mutual Interference When installing Sensors face-to-face or side-by-side, ensure that the minimum distances given in the following table are maintained. (Unit: mm)
• Mounting Tightening Force Do not tighten the nut with excessive force. A washer must be used with the nut. Do not use tightening force that exceeds the values in the following table.
• Wiring In the IO-Link mode, the cable between the IO-Link Master and Sensor must have a length of 20m or less. Warning Warning level Indicates a potentially hazardous situation which, if not avoided, will result in minor or moderate injury, or may result in serious injury or death. Additionally there may be significant property damage. Precautions for Safe Use Supplementary comments on what to do or avoid doing, to use the product safely. Precautions for Correct Use Supplementary comments on what to do or avoid doing, to prevent failure to operate, malfunction or undesirable effect on product performance. General prohibition Indicates the instructions of unspecified prohibited action. Caution, explosion Indicates the possibility of explosion under specific conditions. Warning Precautions for Safe Use Precautions for Correct Use Model Item l d D m n E2EQ-X3B4 (-M1TJ) -IL@ 81 8 E2EQ-X7B4 (-M1TJ) -IL@ 18 20 27 E2EQ-X10B4 (-M1TJ) -IL@ 30 40 45 Model Item A B E2EQ-X3B4 (-M1TJ) -IL@ 30 20 E2EQ-X7B4 (-M1TJ) -IL@ 50 35 E2EQ-X10B4 (-M1TJ) -IL@ 100 70 Model Item Torque E2EQ-X3B4 (-M1TJ) -IL@ 30 N·m E2EQ-X7B4 (-M1TJ) -IL@ 70 N·m E2EQ-X10B4 (-M1TJ) -IL@ 180 N·m l m n m D d dia. l A B

E2EQ-@-IL@ Dimensions Pre-wired Models Pre-wired Connector Models (Unit: mm) Tolerance class IT16 applies to dimensions in this data sheet unless otherwise specified. E2EQ-X3B4-IL@ 21 dia. 417 Indicators *2 Two clamping nuts Toothed washer M12×1 *1. 4-dia. vinyl-insulated round cable with 3 conductors (Flame-resistant, Conductor cross section: 0.3 mm2, Insulator diameter: 1.3 mm), Standard length: 2 m *2. Operation indicator (orange), stability indicator/ communication indicator (green) E2EQ-X7B4-IL@ 29 dia. Indicators *2 Two clamping nuts Toothed washer M18×1 *1. 6-dia. vinyl-insulated round cable with 3 conductors (Flame-resistant, Conductor cross section: 0.5 mm2, Insulator diameter: 1.9 mm), Standard length: 2 m *2. Operation indicator (orange), stability indicator/ communication indicator (green) E2EQ-X10B4-IL@ 42 dia. 536 M30×1.5 Indicators *2 Two clamping nuts Toothed washer *1. 6-dia. vinyl-insulated round cable with 3 conductors (Flame-resistant, Conductor cross section: 0.5 mm2, Insulator diameter: 1.9 mm), Standard length: 2 m *2. Operation indicator (orange), stability indicator/ communication indicator (green) E2EQ-X3B4-M1TJ-IL@ 21 dia. 17 4 Two clamping nutsToothed washer Indicators *2 M12×1 M12×1 *1. 4-dia. vinyl-insulated round cable (Flame-resistant), Standard length: 0.3 m *2. Operation indicator (orange), stability indicator/ communication indicator (green) E2EQ-X7B4-M1TJ-IL@ 29 dia. 24 4 Indicators *2 Two clamping nuts Toothed washer M18×1 *1 M12×1 *1. 6-dia. vinyl-insulated round cable (Flame-resistant), Standard length: 0.3 m *2. Operation indicator (orange), stability indicator/ communication indicator (green) E2EQ-X10B4-M1TJ-IL@ 42 dia. 105 Indicators *2 Two clamping nutsToothed washer *1 M12×1 M30×1.5 *1. 6-dia. vinyl-insulated round cable (Flame-resistant), Standard length: 0.3 m *2. Operation indicator (orange), stability indicator/ communication indicator (green) Mounting Hole Dimensions F Model E2EQ-X3B4 E2EQ-X7B4 E2EQ-X10B4 +0.5 +0.5

Terms and Conditions of Sale 1. Offer; Acceptance . These terms and conditions (these "Terms ") are deemed part of all quotes, agreements, purchase orders, acknowledgments, price lists, catalogs, manuals, brochures and other documents, whether electronic or in writing, relating to the sale of products or services (collectively, the "Products by Omron Electronics LLC and its subsidiary companies (“Omron ”). Omron objects to any terms or conditions proposed in Buyer’s purchase order or other documents which are inconsistent with, or in addition to, these Terms. 2. Prices; Payment Terms. All prices stated are current, subject to change with- out notice by Omron. Omron reserves the right to increase or decrease prices on any unshipped portions of outstanding orders. Payments for Products are due net 30 days unless otherwise stated in the invoice. 3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (i) the invoice is paid according to Omron’s payment terms and (ii) Buyer has no past due amounts. 4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or the maximum legal rate, whichever is less, on any balance not paid within the stated terms. 5. Orders . Omron will accept no order less than $200 net billing. 6. Governmental Approvals. Buyer shall be responsible for, and shall bear all costs involved in, obtaining any government approvals required for the impor- tation or sale of the Products. 7. Taxes . All taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Omron or required to be collected directly or indirectly by Omron for the manufacture, production, sale, delivery, importa- tion, consumption or use of the Products sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Omron. 8. Financial. If the financial position of Buyer at any time becomes unsatisfactory to Omron, Omron reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Omron may (without liabil- ity and in addition to other remedies) cancel any unshipped portion of Prod- ucts sold hereunder and stop any Products in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts. 9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Omron against all related costs or expenses. 10. Force Majeure . Omron shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron: a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship except in “break down” situations. b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall constitute delivery to Buyer; c. All sales and shipments of Products shall be FOB shipping point (unless oth- erwise stated in writing by Omron), at which point title and risk of loss shall pass from Omron to Buyer; provided that Omron shall retain a security inter- est in the Products until the full purchase price is paid; d. Delivery and shipping dates are estimates only; and e. Omron will package Products as it deems proper for protection against nor- mal handling and extra charges apply to special conditions. 12. Claims. Any claim by Buyer against Omron for shortage or damage to the Products occurring before delivery to the carrier must be presented in writing to Omron within 30 days of receipt of shipment and include the original trans- portation bill signed by the carrier noting that the carrier received the Products from Omron in the condition claimed. 13. Warranties . (a) Exclusive Warranty . Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Li mitations. OMRON MAKES NO WARRANTY OR REPRESENTA TION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL- ITY OR FITNESS FOR A P ARTICULAR PURPOSE OF THE PRO DUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THA T THE PRODUCTS WILL SUITABL Y MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or oth- erwise of any intellectual property right. (c) Buyer Remedy . Omron’s sole obli- gation hereunder shall be, at Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsi- ble for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were prop- erly handled, stored, installed and maintained and not subject to contamina- tion, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Compa- nies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environ- ments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron247.com or contact your Omron representative for pub- lished information. 14. Limitation on Liability; Etc . OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT , INCIDENT AL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY , NEGLIGENCE OR STRICT LIABILITY . Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. 15. Indemnities . Buyer shall indemnify and hold harmless Omron Companies and their employees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, inves- tigation, litigation or proceeding (whether or not Omron is a party) which arises or is alleged to arise from Buyer's acts or omissions under these Terms or in any way with respect to the Products. Without limiting the foregoing, Buyer (at its own expense) shall indemnify and hold harmless Omron and defend or set- tle any action brought against such Companies to the extent based on a claim that any Product made to Buyer specifications infringed intellectual property rights of another party. 16. Property; Confidentiality. Any intellectual property in the Products is the exclu- sive property of Omron Companies and Buyer shall not attempt to duplicate it in any way without the written permission of Omron. Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Omron. All information and materials supplied by Omron to Buyer relating to the Products are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. 17. Export Controls. Buyer shall comply with all applicable laws, regulations and licenses regarding (i) export of products or information; (iii) sale of products to “forbidden” or other proscribed persons; and (ii) disclosure to non-citizens of regulated technology or information. 18. Miscellaneous . (a) Waiver. No failure or delay by Omron in exercising any right and no course of dealing between Buyer and Omron shall operate as a waiver of rights by Omron. (b) Assignment . Buyer may not assign its rights hereunder without Omron's written consent. (c) Law. These Terms are governed by the law of the jurisdiction of the home office of the Omron company from which Buyer is purchasing the Products (without regard to conflict of law princi- ples). (d) Amendment . These Terms constitute the entire agreement between Buyer and Omron relating to the Products, and no provision may be changed or waived unless in writing signed by the parties. (e) Severability . If any provi- sion hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. (f) Setoff . Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. (g) Definitions . As used herein, “including” means “including without limitation”; and “Omron Compa- nies” (or similar words) mean Omron Corporation and any direct or indirect subsidiary or affiliate thereof. Certain Precautions on Specifications and Use 1. Suitability of Use . Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Prod- uct in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases but the following is a non-exhaustive list of applications for which particular attention must be given: (i) Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Use in consumer products or any use in significant quantities. (iii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equip- ment, and installations subject to separate industry or government regulations. (iv) Systems, machines and equipment that could present a risk to life or prop- erty. Please know and observe all prohibitions of use applicable to this Prod- uct. NEVER USE THE PRODUCT FOR AN APPLICA TION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON’S PRO DUCT IS PROP- ERL Y RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. 2. Programmable Products. Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof. 3. Performance Data . Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitabil- ity and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it to actual application require- ments. Actual performance is subject to the Omron’s Warranty and Limitations of Liability. 4. Change in Specifications . Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our prac- tice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifica- tions of the Product may be changed without any notice. When in doubt, spe- cial part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to confirm actual specifications of purchased Product. 5. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions.

OMRON CANADA, INC. • HEAD OFFICE OMRON ELECTRONICS DE MEXICO • HEAD OFFICE OMRON ELECTRONICS DE MEXICO • SALES OFFICE OMRON ELETRÔNICA DO BRASIL L TDA • HEAD OFFICE OMRON ARGENTINA • SALES OFFICE Cono Sur • 54.11.4783.5300 OMRON CHILE • SALES OFFICE Santiago • 56.9.9917.3920 OTHER OMRON LATIN AMERICA SALES 54.11.4783.5300 Authorized Distributor: Printed on recycled paper. Controllers & I/O

• Machine Automation Controllers (MAC) • Motion Controllers
• Programmable Logic Controllers (PLC) • Temperature Controllers • Remote I/O Robotics
• Industrial Robots • Mobile Robots Operator Interfaces
• Human Machine Interface (HMI) Motion & Drives
• Machine Automation Controllers (MAC) • Motion Controllers • Servo Systems
• Frequency Inverters Vision, Measurement & Identification
• Vision Sensors & Systems • Measurement Sensors • Auto Identification Systems Sensing
• Photoelectric Sensors • Fiber-Optic Sensors • Proximity Sensors
• Rotary Encoders • Ultrasonic Sensors Safety
• Safety Light Curtains • Safety Laser Scanners • Programmable Safety Systems
• Safety Mats and Edges • Safety Door Switches • Emergency Stop Devices
• Safety Switches & Operator Controls • Safety Monitoring/Force-guided Relays Control Components
• Power Supplies • Timers • Counters • Programmable Relays
• Digital Panel Meters • Monitoring Products Switches & Relays
• Limit Switches • Pushbutton Switches • Electromechanical Relays
• Solid State Relays Software
• Programming & Configuration • Runtime