EI28 FERROXCUBE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Supersedes data of September 2004 2008 Sep 01 FERROXCUBE E28/17/11 EI cores

2008 Sep 01 499

Effective core parameters of an E / I combination Ordering information for I cores SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1) 0.588 mm −1 Ve effective volume 4120 mm 3 Ie effective length 49.2 mm Ae effective area 83.7 mm 2 Amin minimum area 83.7 mm 2 m mass of E core ≈ 17 g m mass of I core ≈ 5.1 g GRADE TYPE NUMBER 3C90 I28/3.5/11-3C90 handbook, halfpage handbook, halfpage 28 ± 0.55 18.6 min. 7.25 ± 0.25 12.8 ± 0.2 17.3 ± 0.25 10.75 ± 0.2 MFP090 Fig.1 E28/17/11 core. Dimensions in mm. handbook, halfpage MFP091 28 ± 0.55 3.5 ± 0.2 10.75 ± 0.2 Fig.2 I28/3.5/11. Dimensions in mm. Core halves for use in combination with an I core AL measured in combination with an I core, clamping force for AL measurements 40 ± 20 N; Properties of core sets under power conditions GRADE AL (nH) µe AIR GAP (µm) TYPE NUMBER 3C90 3625 ± 25 % ≈ 1700 ≈ 0 E28/17/11-3C90 GRADE B (mT) at CORE LOSS (W) at H=2 5 0A / m ; f = 25 kHz; T = 100 °C f = 25 kHz; = 200 mT; T = 100 °C f=1 0 0k H z ; =100 mT; T = 100 °C f = 400 kHz; =50 mT; T = 100 °C Bˆ Bˆ Bˆ

2008 Sep 01 500

DATA SHEET STATUS DEFINITIONS DISCLAIMER Life support applications  These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expec ted to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. DATA SHEET STATUS PRODUCT STATUS DEFINITIONS Preliminary specification Development This data sheet contains prelim inary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Product specification Production This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. PRODUCT STATUS DEFINITIONS STATUS INDICATION DEFINITION Prototype These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. Design-in These products are recommended for new designs. Preferred These products are recommended for use in current designs and are available via our sales channels. Support These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability.