E250N50X4 ANAREN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
USA/Canada: Toll Free: Europe : (315) 432-8909 (800) 544-2414 +44 2392-232392 Model E2 50N50X4 Features:
- RoHS Compliant
- 250 Watts
- DC – 2.2GHz
- AlN Ceramic
- Non-Nichrome Resistive Element
- Low VSWR
- 100% Tested Flangeless Termination
Description
The E250N50X4 is high performance Aluminum Nitride ( AlN) termination intended as a cost competitive alternative to Berylli um Oxide (BeO). The termination is well suited to all cellular frequency b ands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handlin g makes the part ideal for terminating circulators and for use i n power combiners. The termination is also RoHS compliant! General Specifications Resistive Element Thick film Substrate AlN Ceramic Terminal Finish Matte Tin over Nickel Barrier Operating Temperature -50 to +200 °C (see de rating chart) Tolerance is ±0.010”, unless otherwise specified.±± Designed to m eet of exceed applicable portions of MIL-E-5400. All dimensions in inches. Electrical Specifications Resistance Value: 50 Ohms, ± 2% Power: 250 Watts Frequency Range: DC – 2.2 GHz Return Loss > 20 dB DC – 2.2 GHz Specification based on unit properly installed usin g suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change. Outline Drawing UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES 1 of 2
250 Watts, 50 ΩΩ ΩΩ
USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Model E2 50N50X4 Typical Performance: E250N50X4 E250N50X4 Power De-rating: Mounting Footprint and Procedure: *Actual performance could be limited by the solder properties of the application 2 of 2