P6KE_V01 LITTELFUSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 6

Technical content

Features

The P6KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

Description

Parameter Symbol Value Unit Peak Pulse Power Dissipation by 10/1000μs Test Waveform (Fig.2) (Note 1), (Note 4) P PPM 600 W Steady State Power Dissipation on Infinite Heat Sink at T L=75ºC PD 5.0 W Peak Forward Surge Current, 8.3ms Single Half Sine Wave Unidirectional Only (Note 2) I FSM 100 A Maximum Instantaneous Forward Voltage at 50A for Unidirectional Only (Note 3) V F 3.5/5.0 V Operating Junction and Storage Temperature Range T J, TSTG -55 to 175 °C Typical Thermal Resistance Junction to Lead R θJL 20 °C/W Typical Thermal Resistance Junction to Ambient R θJA 75 °C/W Notes: 1 . Non-repetitive current pulse , per Fig. 4 and derated above TJ (initial) = 25OC per Fig. 3. 2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per minute maximum. 3. VF < 3.5V for single die parts and VF< 5.0V for stacked-die parts. 4. The PPPM of stacked-die parts is 800W and please contact littelfuse for the detail stacked-die parts. Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Agency Approvals

  • 600W peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles):0.01%
  • Glass passivated chip junction in DO-15 Package
  • Fast response time: typically less than 1 .0ps from 0 Volts to BV min
  • Excellent clamping capability
  • Typical failure mode is short from over-specified voltage or current
  • Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
  • IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact)
  • ESD protection of data lines in accordance with IEC 61000-4-2
  • EFT protection of data lines in accordance with IEC 61000-4-4
  • Low incremental surge resistance
  • Typical I R less than 1μA when VBR min>12V
  • High temperature to reflow soldering guaranteed: 260°C/40sec / 0.375” ,(9.5mm) lead length, 5 lbs., (2.3kg) tension
  • V BR @ TJ= VBR@25°C x (1+αT x (TJ - 25)) (αT :Temperature Coefficient, typical value is 0.1%)
  • Plastic package is flammability rated V-0 per Underwriters Laboratories
  • Matte tin lead–free plated
  • Halogen free and RoHS compliant
  • Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/JEDEC J-STD- 609A.01) P6KE Series Functional Diagram Bi-directional Uni-directional Cathode Anode Bi-directional Uni-directional RoHS Pb e3 Datasheet Additional Infomarion Resources Samples

T ransient Voltage Suppression Diodes © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/20/15 Axial Leaded – 600W > P6KE series Electrical Characteristics (TA=25°C unless otherwise noted) Part Number (Uni) Part Number (Bi) Reverse Stand off Voltage VR (Volts) Breakdown Voltage VBR (Volts) @ IT Test Current IT (mA) Maximum Clamping Voltage VC @ Ipp (V) Maximum Peak Pulse Current Ipp (A) Maximum Reverse Leakage IR@ VR (µA) Agency Approval MIN MAX For bidirectional type having VR of 10 volts and less, the IR limit is double. For parts without A , the VBR is ± 10% and VC is 5% higher than with A parts

T ransient Voltage Suppression Diodes © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/20/15 Axial Leaded – 600W > P6KE series Physical Specificationst C Weight 0.015oz., 0.4g Case JEDEC DO-204AC (DO-15) molded plastic body over passivated junction. Polarity Color band denotes the cathode except Bipolar. T erminal Matte Tin axial leads, solderable per JESD22-B102. Dimensions D A A C B Cathode Band (for Uni-directional products only) DO-204AC (DO-15) Soldering Parameters Temperature (T Time (t) Ts(min) Ts(max) TL TP ts Preheat tL tp Ramp-up Critical Zone TL to TP Ramp-down t 25˚C to Peak 25˚C Reflow Condition Lead–free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus Temp (TA) to peak 3°C/second max TS(max) to TA - Ramp-up Rate 3°C/second max Reflow - Temperature (TA) (Liquidus) 217°C - Time (min to max) (ts) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 260°C Flow/Wave Soldering (Solder Dipping) Peak T emperature : 265OC Dipping Time : 10 seconds Soldering : 1 time Dimensions Inches Millimeters Min Max Min Max A 1 .000 - 25.40 - B 0.230 0.300 5.80 7 .60 C 0.028 0.034 0.71 0.86 D 0.104 0.140 2.60 3.60 Environmental Specifications High T emp. Storage JESD22-A103 HTRB JESD22-A108 T emperature Cycling JESD22-A104 H3TRB JESD22-A101 RSH JESD22-B106

T ransient Voltage Suppression Diodes © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/20/15 Axial Leaded – 600W > P6KE series Part Numbering System Packaging Part Number Component Package Quantity Packaging Option Packaging Specification P6KExxxXX DO-204AC 4000 Tape & Reel EIA STD RS-296 P6KExxxXX-B DO-204AC 1000 BULK Littelfuse Spec. OPTION CODE: BLANK Reel Tape -B Bulk Packaging SERIES CODE P6KE xxxXXX TYPE CODE: A Uni-Directional (5% VBR Voltage Tolerance) CA Bi-Directional (5% VBR Voltage Tolerance) VBR VOLTAGE CODE (Refer to the Electrical Characteristics table) Part Marking System F P6KEXXX YYWW Trace Code Marking YY:Year Code WW: Week Code Product Type Littelfuse Logo Cathode Band (for Uni-directional products only) T ape and Reel Specification 0.197+/-0.020 2.75 0.047 (330.2) Recess Depth Max. 0.75 (19.05) Off Center either side 0.028(0.7) Dimensions are in inches/mm 0.236 (65.0) (5.0+/- 0.5) (53.0+2.0/-1.0) (6.0)(1.2) (69.85) 13.0 (76.2) 3.0 0.68 (17.27) Direction of Feed