E215

E105SD1CBE CK-COMPONENTS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

F–17 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com FToggle E Series Sealed Miniature Toggle Switches Features/Benefits

• Sealed against solder and cleaning process contaminants
• UL 94V-0 Nylon case and bushing
• Multi-positions
• ESD protection available
• RoHS compliant models available Typical Applications
• Telecommunications
• Instrumentation
• Medical equipment Specifications CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or DC max. Q contact material: E1XX & E2XX MODELS: 7.5 AMPS @ 125 V AC or 28 V DC; 3 AMPS @ 250 V AC. E3XX MODELS: 5 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC. See page F-25 for additional ratings. ELECTRICAL LIFE: E1XX and E2XX models: 40,000 make-and-break cycles at full load. E3XX models: 30,000 cycles. CONTACT RESISTANCE: Below 10 mΩ typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 Ω min. ELECTROSTATIC DISCHARGE (ESD) OPTION: F1 conductive bushing only. Dissipates up to 20,000 V DC from actuator to ground. DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level. OPERATING TEMPERATURE: –30ºC to 85ºC. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). DEGREE OF PROTECTION: IP57; Protection against harmful dust deposit, full-scale voltage protection, temporary immersion. Materials CASE & BUSHING: Glass filled nylon 6/6, flame retardant, heat stabilized (UL 94V-0). F1 conductive bushing option is impregnated with carbon fibers. ACTUATOR: Brass, chrome plated with internal o-ring seal standard. SWITCH SUPPORT: Brass or steel, matte-tin plated. SWITCH SUPPORT RETAINER: Stainless steel. CONTACTS & TERMINALS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Copper alloy, silver plated. See page F-29 for additional contact materials. TERMINAL SEAL: Epoxy. HARDWARE: Nut & Locking ring: Brass, nickel plated. Lockwasher: Steel, nickel plated. NOTE: Any models supplied with P, S, R, Q, B or G contact material ar e RoHS compliant and compatible. NOTE: Specifications and materials listed above ar e for switches with standard options. For information on specific and custom switches, consult Customer Service Center . Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages F–18 thru F–24. For additional options not shown in catalog, consult our Customer Service Center. All models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods. Switch Function E101 SP , On-None-On E103 SP , On-Off-On E105 SP , Mom.-Off-Mom. E107 SP , On-Off-Mom. E108 SP, On-None-Mom. E201 DP , On-None-On E203 DP , On-Off-On E205 DP, Mom.-Off-Mom. E207 DP, On-Off-Mom. E208 DP, On-None-Mom. E211 DP, On-On-On E213 DP , On-On-Mom. E215 DP , Mom.-On-Mom. E301 3P , On-None-On * F1 available with SP and DP versions only, please see page F-19 Actuator M .300" high S .500" high L3 Plastic, .940" high Terminations A Right angle, PC thru-hole AV2 Vertical right angle, PC thru-hole C PC Thru-hole V3 .460" high, V-bracket Z Solder lug A3 Right angle, PC thru-hole AV3 Vertical right angle, PC thru-hole V6 .460" high, V-bracket V9 1.150" high, V-bracket V31 .460" high, snap-in V-bracket V61 .460" high, snap-in V-bracket W .750" long, wire wrap Z3 Quick connect Bushing D1 .250" high F1 Conductive, .250" high* D9 .280" high Y Threaded, .350" high Contact Material B Gold P Gold, matte-tin Q Silver S Silver, matte-tin G Gold over silver R Gold over silver, matte-tin Seal E Epoxy Models Available

F–18 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com FToggle E Series Sealed Miniature Toggle Switches SWITCH FUNCTION DPDT 2-1,5-4 2-1,5-4 2-1,5-4 2-1,5-4 N/A OPEN N/A 2-3,5-4 2-3,5-6 2-3,5-6 2-3,5-6 2-3,5-6 ON NONE ON ON OFF ON MOM. OFF MOM. ON OFF MOM. ON NONE MOM. ON ON ON ON ON MOM. MOM. ON MOM. E201 E203 E205 E207 E208 E211 E213 E215 DP SPDT 2-1 2-1 2-1 N/A OPEN N/A 2-3 2-3 2-3 ON NONE ON ON OFF ON MOM. OFF MOM. ON OFF MOM. ON NONE MOM. E101 E103 E105 E107 E108 SP SCHEMATIC CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 SWITCH FUNCTION POS. 1 POS. 2 POS. 3 MODEL NO. NO. POLES Terminal Numbers For Reference Only Terminal Numbers For Reference Only DPDT SPDT Part number shown: E101SD1CBE Part number shown: E201SD1CBE MOM. = Momentary All models with all options when ordered with G,R, Q or S contact material except with F1 conductive bushing. Wiring for 3-way switch, see Section N. C&K marking on opposite sideC&K marking on opposite side

F–19 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com FToggle E Series Sealed Miniature Toggle Switches SWITCH FUNCTION ACTUATOR BUSHING Gloss plastic Chrome finish 1/4-40 UNS-2A PANEL MOUNTING 3PDT 2-1,5-4,8-7N/A2-3,5-6,8-9 ON NONE ONE301 3P SCHEMATIC CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 SWITCH FUNCTION POS. 1 POS. 2 POS. 3 MODEL NO. NO. POLES C&K marking on opposite sideC&K marking on opposite side Terminal Nos. For Reference Only 3PDT Part number shown: E301SD1CBE MOM. = Momentary All models with all options when ordered with G, R, Q or S contact material except with F1 conductive bushing. ** Wiring for 3-way switch, see Section N. Standard when ordered with A, A3, AV2, AV3, V2-V61 terminations. Finish: Chrome. E3XX models not available with D9 bushing. NOTE: Internal o-ring actuator seal standard for all bushing options. Standard when ordered with C, Z, Z3, W & W4 terminations. Finish: Chrome Other colors available, consult Customer Service Center. No color choice required for S & M actuators. ESD protection depends on proper grounding of switch support bracket. F1 conductive bushing option is impregnated with carbon fibers; dissipates electrostatic discharge (ESD) up to 20,000 V from actuator to ground. Available with M & S actuator options and A, A3, A V2, AV3, V3-V61 termination options. Available only with C, Z, Z3, & W terminations. Available for 1&2 pole only. Hardware: One dress nut part number 299D01201, one hex nut part number 540400201 and lockwasher part number 700303202 supplied standard. Will withstand 4 in.-lbs. of torque with no distortion. M .300" HIGH S .500" HIGH L3 PLASTIC, .940" HIGH D1 .250" HIGH, UNTHREADED F1 ESD CONDUCTIVE BUSHING, .250" HIGH, UNTHREADED D9 .280" HIGH, UNTHREADED Y THREADED, INSULATED, .350" HIGH WITH KEYWAY L3 ACTUATOR COLOR OPTION CODE ACTUATOR COLOR ACTUATOR F1 bushing is not UL/CSA approved

2 BLACK

F–20 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com FToggle E Series Sealed Miniature Toggle Switches TERMINATIONS PC MOUNTING PC MOUNTING Actuator Shown In Pos. 1 SECTION A-A Actuator Shown In Pos. 1 SECTION A-A PC MOUNTING Z SOLDER LUG C PC THRU-HOLE A RIGHT ANGLE, PC THRU-HOLE A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE A RIGHT ANGLE, PC THRU-HOLE A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE Z3 QUICK CONNECT SPDT thru 3PDT SPDT thru 3PDT SPDT thru 3PDT E101MD1ABE Horizontal Actuation SPDT E201MD1ABE Horizontal Actuation DPDT Not available with F1 conductive bushing or P , R or S contact material. Mating quick connector available; order part number 530100000, page F-26. Not available with F1 conductive bushing or P, R or S contact material. Not available with Y bushing. Terminal bend radii and lead-in manufacturing option. Not available with Y bushing. Terminal bend radii and lead-in manufacturing option. Not available with F1 conductive bushing. Terminal Nos. For Reference Only Terminal Nos. For Reference Only

F–21 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com FToggle E Series Sealed Miniature Toggle Switches TERMINATIONS Actuator Shown In Pos. 1 SECTION A-A PC MOUNTING Actuator Shown In Pos. 1 SECTION A-A Actuator Shown In Pos. 1 SECTION A-A PC MOUNTING PC MOUNTING E301MD1ABE Horizontal Actuation 3PDT E201MD1AV2BE Vertical Actuation DPDT E101MD1AV2BE Vertical Actuation SPDT Not available with Y bushing. Terminal bend radii and lead-in manufacturing option. Not available with Y bushing. Terminal bend radii and lead-in manufacturing option. Not available with D9 & Y bushings. Terminal bend radii and lead-in manufacturing option. Terminal Nos. For Reference Only A RIGHT ANGLE, PC THRU-HOLE AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH A3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150" PITCH AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150" PITCH

F–22 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com FToggle E Series Sealed Miniature Toggle Switches TERMINATIONS Actuator Shown In Pos. 1 SECTION A-A PC MOUNTING Actuator Shown In Pos. 1 SNAP-IN PC MOUNTING Actuator Shown In Pos. 1 SNAP-IN PC MOUNTING AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE .150" PITCH V6 VERTICAL MOUNT, V-BRACKET V61 VERTICAL MOUNT, V-BRACKET, SNAP-IN V6 VERTICAL MOUNT, V-BRACKET V61 VERTICAL MOUNT, V-BRACKET, SNAP-IN Not available with D9 & Y bushings. Terminal bend radii and lead-in manufacturing option. Not available with Y bushing. Not available with Y bushing. V6, V61 .460 (11,68) DIM ‘A’ OPTION CODE E301MD1AV2BE Vertical Actuation 3PDT E201MD1__BE DPDT E101MD1__BE SPDT V6, V61 .460 (11,68) DIM ‘A’ OPTION CODE

F–23 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com FToggle Actuator Shown In Pos. 1 SNAP-IN PC MOUNTING V9 VERTICAL MOUNT, V-BRACKET V9 1.150 (29,21) DIM ‘A’ OPTION CODE E301MD1__BE 3PDT Not available with D9 & Y bushings. E Series Sealed Miniature Toggle Switches TERMINATIONS Actuator Shown In Pos. 1 SNAP-IN PC MOUNTING Actuator Shown In Pos. 1 SNAP-IN PC MOUNTING V3, V9 VERTICAL MOUNT, V-BRACKET V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN V3, V9 VERTICAL MOUNT, V-BRACKET V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN E201MD1__BE DPDT E101MD1__BE SPDT Not available with Y bushing. Not available with Y bushing. V3, V31 .460 (11,68) V9 1.150 (29,21) DIM ‘A’ OPTION CODE V3, V31 .460 (11,68) V9 1.150 (29,21) DIM ‘A’ OPTION CODE

F–24 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com FToggle E Series Sealed Miniature Toggle Switches CONTACT MATERIAL * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. 2 END CONTACTS: Coin silver, with gold plate over nickel plate.

3 CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate

over nickel plate. 4 END CONTACTS: Coin silver, silver plated.

5 CENTER CONTACT & ALL TERMINALS: Copper alloy, with gold flash over silver

plate. Or copper alloy, silver plated. 6 TERMINALS: Copper alloy, with matte-tin over nickel plate. NOTE: Any models supplied with P , S, R, Q, B or G contact material are RoHS compliant. All models with all options when ordered with S, R, G, or Q contact material except with F1 conductive bushing. B contact material standard with all terminations. P, S & R contact materials not available with Z & Z3 terminations. OPTION CODE CONTACT MATERIAL TERMINAL PLATING RATINGS SILVER 5 MATTE-TIN 6 GOLD 1 SILVER 4,5 GOLD OVER SILVER 2,3 GOLD 3 MATTE-TIN 6 GOLD 1 MATTE-TIN 6 LOW LEVEL/ DRY CIRCUIT POWER LOW LEVEL/DRY CIRCUIT OR POWER 0.4 VA MAX. @ 20 V AC OR DC MAX. E1XX & E2XX MODELS: 7.5 AMPS @ 125 V AC OR 28 V DC; 3 AMPS @ 250 V AC. E3XX MODELS: 5 AMPS @ 125 V AC OR 28 V DC; 2 AMPS @ 250 V AC. E1XX AND E2XX MODELS: 0.4 VA MAX @20 V AC OR DC MAX. OR 7.5 AMPS @125 V AC OR 28 V DC; 3 AMPS @ 250 V AC. DC E3XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR 5 AMPS @ 125 V AC OR 28 V DC; 2 AMPS @ 250 V AC. B P Q S G R