E2011-BA NKK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Light Duty Miniature Toggles Series E 2-06NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com Distinctive Characteristics Power and logic level capabilities available to suit varying applications. High torque bushing prevents rotation and separation from metal frame during installation. Stainless steel frame resists corrosion. Case of heat resistant resin meets UL94V-0 flammability rating. Antijamming design protects contact mechanism from damage if lever is subjected to sharp downward force or other harsh treatment. Bias guard achieved by interlocking actuator block with lever and interior guide; diagonal force on toggle is not transmitted to actuator block and misalignment of contacts is prevented. Higher insulating barriers protect against crossover in double pole devices. 1,500V dielectric strength between contacts and case is accomplished by clinching the frame away from the terminals. Epoxy sealed terminals prevent entry of solder flux and other contaminants. Actual Size
Light Duty Miniature Toggles Series E 2-06NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com General Specifications Electrical Capacity (Resistive Load) Power Level (No Code or P): 3A @ 125V AC for silver contacts Logic Level (code G or PG): 0.4VA maximum @ 28V AC/DC maximum for gold contacts (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: Find additional explanation of operating range in Supplement section. Other Ratings Contact Resistance: 10 milliohms maximum for silver; 20 milliohms maximum for gold Insulation Resistance: 1,000 megohms minimum @ 500V DC Dielectric Strength: 1,000V AC minimum between contacts for 1 minute minimum; 1,500V AC minimum between contacts & case for 1 minute minimum Mechanical Life: 100,000 operations minimum Electrical Life: 20,000 operations minimum for silver; 50,000 operations minimum for gold Angle of Throw: 25° Materials & Finishes Toggle: Brass with chrome plating Bushing: Brass with nickel plating Frame: Stainless steel Case: Melamine phenolic resin (UL94V-0) Movable Contacts: Copper with silver or gold plating Stationary Contacts: Silver with silver or gold plating Terminals: Copper with silver or gold plating Environmental Data Operating Temp Range: –10°C through +70°C (+14°F through +158°F) Humidity: 90 ~ 95% humidity for 96 hours @ 40°C (104°F) Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours Shock: 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Installation Mounting Torque: 1.47Nm (13 lb •in) for double nut; .686Nm (6 lb •in) for single nut Soldering Time & Temp: Circuits 2 & 5 Manual Soldering: 3 seconds maximum @ 350°C maximum Wave Solder: 5 seconds maximum @ 270°C maximum. Circuits 1, 3, 8, & 9 Manual Soldering: 4 seconds maximum @ 410°C maximum Wave Solder: See Profile A in Supplement section. Note: On circuits 1, 3, 8, & 9 levers must be in center or off position while soldering. Standards & Certifications Flammability Standards: UL94V-0 case UL Recognized: All single & double pole models recognized at 3A @ 125V AC; UL File No. WOYR2.E44145; add “/U” to end of part number to order UL mark on switch. CSA Certified: Single pole, double throw solder lug & PC models certified at 3A @ 125V AC; double pole, double throw PC models certified at 3A @ 125V AC; CSA File No. 023535-0-000; add “/C” to end of part number to order CSA mark on switch.
Light Duty Miniature Toggles Series E 2-06NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com COLORS A Black B White C Red E Yellow F Green G Blue OPTIONAL CAPS B Bat Lever Cap C Bat Lever Conical Cap POLES
1 SPST
2 DPST
TYPICAL SWITCH ORDERING EXAMPLE
2 CE20
ON-NONE-ON CircuitSilver Contacts & Straight PC Terminals with 3-Amp Rating CIRCUITS
1 ON NONE OFF
2 ON NONE ON
3 ON OFF ON
5 ON NONE (ON)
8 (ON) OFF (ON)
9 ON OFF (ON)
( ) = Momentary CONTACTS, RATINGS, & TERMINALS No Code Silver Contacts; Solder Lug Terminals; 3A @ 125V AC G Gold Contacts; Solder Lug T erminals 0.4V A max @ 28V AC/DC max P Silver Contacts; Straight PC Terminals; 3A @ 125V AC PG Gold Contacts; Straight PC T erminals 0.4V A max @ 28V AC/DC max IMPORTANT: Switches are supplied without UL & CSA marking unless specified. Specific models & ratings noted on General Specifications page. DESCRIPTION FOR TYPICAL ORDERING EXAMPLE E2022P-CG P G Blue Bat Lever Conical Cap
Light Duty Miniature Toggles Series E 2-06NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com CONTACT MATERIALS, RATINGS, & TERMINALS Toggle Position ( ) = Momentary Connected Terminals Throw & Schematics Pole Model Down Center Up Down Center Up Note: Terminal numbers are not actually on the switch. SP E2011 ON NONE OFF 2-3 OPEN OPEN SPST SP E2012 E2013 E2015 E2018 E2019 ON ON ON (ON) ON NONE OFF NONE OFF OFF ON ON (ON) (ON) (ON) 2-3 OPEN 2-1 SPDT DP E2021 ON NONE OFF 2-3 5-6 OPEN OPEN DPST DP E2022 E2023 E2025 E2028 E2029 ON ON ON (ON) ON NONE OFF NONE OFF OFF ON ON (ON) (ON) (ON) 2-3 5-6 OPEN 2-1 5-4 DPDT PCB Footprints Solder Lug Silver Contacts Power Level 3A @ 125V AC Complete explanation of operating range in Supplement section. Wiring Specifications The .043” x .079” (1.1mm x 2.0mm) oblong terminal hole accommodates one solid 18-gauge wire or two solid or stranded 20-gauge wires. G Solder Lug Gold Contacts Logic Level 0.4VA maximum @ 28V AC/DC maximum Straight PC Silver Contacts Power Level 3A @ 125V AC Straight PC Gold Contacts Logic Level 0.4VA maximum @ 28V AC/DC maximum POLES & CIRCUITS 2 (COM) 2 (COM) 2 5(COM) 3 6 1 3 4 6 2 5 (COM) Epoxy Seal (2.0) .079 (4.0) .157 (2.0) .079 (1.1) .043 Thk (0.7) .028 (0.5) Com .020 Complete explanation of operating range in Supplement section. Epoxy Seal (1.2) .047 (4.3) .169 (6.4) .252 Thk (0.7) .028 (0.5) Com .020 (4.7) .185 (3.9) Typ .154 (1.8) Dia Typ .071 Double PoleSingle Pole (3.9) Typ .154 (1.8) Dia Typ .071 No Code P PG Keyway Keyway
Light Duty Miniature Toggles Series E 2-06NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com TYPICAL SWITCH DIMENSIONS OPTIONAL CAPS & COLORS Cap Colors Available: AT415 Bat Lever Cap Cap Lever Material Polyethylene Solder Lug Single Pole Solder Lug Double Pole E2012 E2011 model does not have terminal 1. The E Series toggles have a bat lever .413” (10.5mm) long. E2022 E2021 model does not have terminals 1 & 4. AT444 Bat Lever Conical Cap Cap Lever Material Polyethylene This standard lever is com - bined with a metric bushing. (10.5) .413 25° (2.8) Dia .110 (7.0) Dia .276 (0.8) .031 (2.5) .098 (0.7) .028 (7.9) .311 M6 P0.75 Black White Red Yellow Green Blue Keyway (7.0) .276 (11.0) .433 (2.8) Dia .110 25° .043 x .079 (0.7) Typ .028 (3.9) Typ .154 (4.0) Typ .157 (0.5) .020 (4.5) .177 (0.7) .028 (10.5) .413 (7.2) .283 (14.6) .575 (2.0) .079 (2.0) Typ .079 (4.7) .185 (2.8) Dia .110 25° .043 x .079 (0.7) Typ .028 (3.9) Typ .154 (4.0) Typ .157 (0.5) .020 (4.5) .177 (0.7) .028 (10.5) .413 (7.2) .283 (14.6) .575 Keyway (11.7) .461 (11.0) .433 A B C E F G B C 25° (5.0) Dia .197 (13.5) .532 (12.0) .472 25° (4.8) Dia .189 (13.1) .516 (11.5) .452
Light Duty Miniature Toggles Series E 2-06NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com STANDARD HARDWARE Standard Hardware
2 AT513M Metric Hexagon Nuts
1 AT507M Metric Locking Ring
1 AT509 Internal Tooth Lockwasher
Optional hardware available. See Accessories & Hardware section. AT513M Metric Hexagon Nut Material: Brass with Nickel Plating AT509 Lockwasher Material: Steel with Zinc/Chromate Face Nut Locking RingLockwasher Lock Nut Panel Thicknesses & Panel Cutouts With Standard Hardware Maximum Effective Panel Thickness: .087” (2.2mm) Without Locking Ring Maximum Effective Panel Thickness: .118” (3.0mm) Without Bottom Hex Nut Maximum Effective Panel Thickness: .154” (3.9mm) Without Locking Ring & Bottom Hex Nut Maximum Effective Panel Thickness: .185” (4.7mm) OPTIONAL SPLASHPROOF BOOT (6.35) Dia .250 (5.6) .220 (0.6) .024 (6.35) Dia .250 AT428M (Metric) Boot for Bat Toggle Material: Silicone Rubber AT507M Metric Locking Ring Material: Steel with Zinc/Chromate (8.0) .315 M6 P0.75 (9.0) .354 (1.5) .059 (2.0) .079 (5.5) .217 (6.0) Dia .236 (12.0) Dia .472 (1.7) .067 (0.8) .031 (6.4) Dia .252 (10.2) Dia .402 (0.5) .020 (11.3) .445(14.3) .563 (1.57) .062 (2.0) .079 (2.5) .098~ (10.8) .425 (4.6) Dia .181 (6.7) Dia .264 (9.8) .386 (6.5) Dia .256 (6.5) .256 (2.2) Dia .087