E18-3F4

E18-3C90-A100-E FERROXCUBE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 10

Technical content

Supersedes data of September 2004 2008 Sep 01 FERROXCUBE E18/4/10 Planar E cores and accessories

2008 Sep 01 2

Planar E cores and accessories E18/4/10 CORES Effective core parameters of a set of E cores SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1) 0.616 mm −1 Ve effective volume 960 mm 3 Ie effective length 24.3 mm Ae effective area 39.3 mm 2 Amin minimum area 39.3 mm 2 m mass of core half ≈ 2.4 g Fig.1 E18/4/10 core half. Dimensions in mm. handbook, halfpage CBW297 18 ±0.35 14 ±0.3 2 ±0.1 10 ±0.2 R0.8 (12×) 4 ±0.1 4 ±0.1 Effective core parameters of an E/PLT combination Ordering information for plates SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1) 0.514 mm −1 Ve effective volume 800 mm 3 Ie effective length 20.3 mm Ae effective area 39.5 mm 2 Amin minimum area 39.5 mm 2 m mass of plate ≈ 1.7 g GRADE TYPE NUMBER 3C90 PLT18/10/2-3C90 3C92 PLT18/10/2-3C92 3C93 PLT18/10/2-3C93 3C94 PLT18/10/2-3C94 3C95 PLT18/10/2-3C95 3C96 PLT18/10/2-3C96 3F3 PLT18/10/2-3F3 3F35 PLT18/10/2-3F35 3F4 PLT18/10/2-3F4 3F45 PLT18/10/2-3F45 3E6 PLT18/10/2-3E6 Fig.2 PLT18/10/2. Dimensions in mm. handbook, halfpage CBW298 18 ±0.35 10 ±0.2 2 ±0.05 R0.8

2008 Sep 01 3

Planar E cores and accessories E18/4/10 Core halves for use in combination with an non-gapped E core AL measured in combination with a non-gapped core half, clamping force for AL measurements, 20 ±10 N, using a PCB coil containing 4 layers of 8 tracks each, total height 1.6 mm. GRADE AL (nH) µe AIR GAP (µm) TYPE NUMBER 3C90 100 ±3% ≈ 49 ≈ 800 E18/4/10-3C90-A100-E 160 ±3% ≈ 78 ≈ 420 E18/4/10-3C90-A160-E 250 ±5% ≈ 123 ≈ 220 E18/4/10-3C90-A250-E 315 ±8% ≈ 154 ≈ 170 E18/4/10-3C90-A315-E 3200 ±25% ≈ 1560 ≈ 0 E18/4/10-3C90 3C92 2330 ±25% ≈ 1140 ≈ 0 E18/4/10-3C92 3C93 2700 ±25% ≈ 1320 ≈ 0 E18/4/10-3C93 3C94 100 ±3% ≈ 49 ≈ 800 E18/4/10-3C94-A100-E 160 ±3% ≈ 78 ≈ 420 E18/4/10-3C94-A160-E 250 ±5% ≈ 123 ≈ 220 E18/4/10-3C94-A250-E 315 ±8% ≈ 154 ≈ 170 E18/4/10-3C94-A315-E 3200 ±25% ≈ 1560 ≈ 0 E18/4/10-3C94 3C95 3800 ±25% ≈ 1870 ≈ 0 E18/4/10-3C95 3C96 2900 ±25% ≈ 1410 ≈ 0 E18/4/10-3C96 3F3 100 ±3% ≈ 49 ≈ 800 E18/4/10-3F3-A100-E 160 ±3% ≈ 78 ≈ 420 E18/4/10-3F3-A160-E 250 ±5% ≈ 123 ≈ 220 E18/4/10-3F3-A250-E 315 ±8% ≈ 154 ≈ 170 E18/4/10-3F3-A315-E 2700 ±25% ≈ 1320 ≈ 0 E18/4/10-3F3 3F35 2200 ±25% ≈ 1070 ≈ 0 E18/4/10-3F35 3F4 100 ±3% ≈ 49 ≈ 800 E18/4/10-3F4-A100-E 160 ±3% ≈ 78 ≈ 420 E18/4/10-3F4-A160-E 250 ±5% ≈ 123 ≈ 220 E18/4/10-3F4-A250-E 315 ±8% ≈ 154 ≈ 170 E18/4/10-3F4-A315-E 1550 ±25% ≈ 760 ≈ 0 E18/4/10-3F4 3F45 1550 ±25% ≈ 760 ≈ 0 E18/4/10-3F45 3E6 13500 +40/-30% ≈ 6600 ≈ 0 E18/4/10-3E6

2008 Sep 01 4

Planar E cores and accessories E18/4/10 Core halves for use in combination with a plate (PLT) AL measured in combination with a plate (PLT), clamping force for AL measurements, 20 ±10 N, using a PCB coil containing 4 layers of 8 tracks each, total height 1.6 mm. GRADE AL() (nH) µe AIR GAP (µm) TYPE NUMBER 3C90 100 ±3% ≈ 41 ≈ 870 E18/4/10-3C90-A100-P 160 ±3% ≈ 65 ≈ 470 E18/4/10-3C90-A160-P 250 ±5% ≈ 102 ≈ 240 E18/4/10-3C90-A250-P 315 ±8% ≈ 129 ≈ 170 E18/4/10-3C90-A315-P 3680 ±25% ≈ 1500 ≈ 0 E18/4/10-3C90 3C92 2690 ±25% ≈ 1100 ≈ 0 E18/4/10-3C92 3C93 3100 ±25% ≈ 1270 ≈ 0 E18/4/10-3C93 3C94 100 ±3% ≈41 ≈870 E18/4/10-3C94-A100-P 160 ±3% ≈65 ≈470 E18/4/10-3C94-A160-P 250 ±5% ≈102 ≈240 E18/4/10-3C94-A250-P 315 ±8% ≈129 ≈170 E18/4/10-C94-A315-P 3680 ±25% ≈ 1500 ≈ 0 E18/4/10-3C94 3C95 4340 ±25% ≈ 1780 ≈ 0 E18/4/10-3C95 3C96 3250 ±25% ≈ 1320 ≈ 0 E18/4/10-3C96 3F3 100 ±3% ≈41 ≈870 E18/4/10-3F3-A100-P 160 ±3% ≈65 ≈470 E18/4/10-3F3-A160-P 250 ±5% ≈102 ≈240 E18/4/10-3F3-A250-P 315 ±8% ≈129 ≈170 E18/4/10-3F3-A315-P 3100 ±25% ≈ 1270 ≈ 0 E18/4/10-3F3 3F35 2500 ±25% ≈ 1020 ≈ 0 E18/4/10-3F35 3F4 100 ±3% ≈41 ≈870 E18/4/10-3F4-A100-P 160 ±3% ≈65 ≈470 E18/4/10-3F4-A160-P 250 ±5% ≈102 ≈240 E18/4/10-3F4-A250-P 315 ±8% ≈129 ≈170 E18/4/10-3F4-A315-P 1800 ±25% ≈ 740 ≈ 0 E18/4/10-3F4 3F45 1800 ±25% ≈ 740 ≈ 0 E18/4/10-3F45 3E6 15500 +40/-30% ≈ 6400 ≈ 0 E18/4/10-3E6

2008 Sep 01 5

Planar E cores and accessories E18/4/10 Properties of core sets under power conditions Properties of core sets under power conditions (continued) GRADE B (mT) at CORE LOSS (W) at H = 250 A/m; f = 10 kHz; T = 100 °C f = 100 kHz; = 100 mT; T = 100 °C f = 100 kHz; = 200 mT; T=2 5 °C f = 100 kHz; = 200 mT; T=1 0 0 °C f = 400 kHz; =5 0m T ; T = 100 °C f=5 0 0k H z ; =5 0m T ; T=1 0 0 °C 1. Measured at 140 °C. −≤ 0.6(1) −− GRADE B (mT) at CORE LOSS (W) at H = 250 A/m; f = 10 kHz; T = 100 °C f = 500 kHz; =1 0 0m T ; T = 100 °C f=1M H z ; =3 0m T ; T = 100 °C f=1M H z ; =5 0m T ; T = 100 °C f=3M H z ; =1 0m T ; T=1 0 0 °C Bˆ Bˆ Bˆ Bˆ Bˆ Bˆ Bˆ Bˆ Bˆ

2008 Sep 01 6

Planar E cores and accessories E18/4/10 MOUNTING INFORMATION handbook, 4 columns 18.5 min. 13.5 max. 4.25 min. 10.4 min. R 0.8 max. CBW551 Fig.3 Recommended PCB cut-out for glued planar E18/4/10 cores.

2008 Sep 01 7

Planar E cores and accessories E18/4/10 BLISTER TAPE AND REEL DIMENSIONS handbook, full pagewidth CBW404 E F W B0 S direction of unreeling T cover tape Fig.4 Blister tape. For dimensions see Table 1. Table 1 Physical dimensions of blister tape; see Fig.4 SIZE DIMENSIONS (mm) A0 10.5 ±0.2 B0 18.7 ±0.2 K0 4.5 ±0.2 T0 . 3 ±0.05 W 32.0 ±0.3 E1 . 7 5 ±0.1 F 14.2 ±0.1 D0 1.5 +0.1 D1 ≥ 2.0 P0 4.0 ±0.1 P1 16.0 ±0.1 P2 2.0 ±0.1 S 28.4 ±0.1

2008 Sep 01 8

Planar E cores and accessories E18/4/10 handbook, full pagewidth CBW405 cover film blister tape direction of unreeling Fig.5 Construction of blister tape. handbook, full pagewidth CBW406 trailer minimum number of empty compartments cover tape only leader 552 mm direction of unreeling Fig.6 Leader/trailer tape. Leader: length of leader tape is 552 mm minimum covered with cover tape. Trailer: 160 mm minimum (secured with tape). Storage temperature range for tape: −25 to +45 °C.

2008 Sep 01 9

Planar E cores and accessories E18/4/10 Table 2 Reel dimensions; see Fig.7 SIZE DIMENSIONS (mm) AN W 1 W2 32 330 100 ±5 32.4 ≤36.4 handbook, full pagewidth 12.75 0.15 020.5 NA W 1 MSA284 Fig.7 Reel. Dimensions in mm. For dimensions see Table 2.

2008 Sep 01 10

Planar E cores and accessories E18/4/10 DATA SHEET STATUS DEFINITIONS DISCLAIMER Life support applications  These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS DATA SHEET STATUS PRODUCT STATUS DEFINITIONS Preliminary specification Development This data sheet contains prelimin ary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Product specification Production This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. STATUS INDICATION DEFINITION Prototype These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. Design-in These products are recommended for new designs. Preferred These products are recommended for use in current designs and are available via our sales channels. Support These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability.