E1418A HP | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
- 1-Slot, C-size, register based
- 8/16 independent channels, fl exible and confi gurable
- Individual isolation per channel
- 16-bit resolution D/A per channel
- Programmable selectable voltage/current modes
- Software controlled calibration
Description
The Agilent E1418A 8/16-Channel D/A Converter is a C–size, 1-slot, register-based VXI module. It consists of 8 or 16 fully inde- pendent, isolated or non-isolated, 16-bit D/As. Each channel can be set to voltage or current mode with local or remote sensing on voltage outputs. All outputs can be updated with register- level programming to allow fast backplane access. Each channel can be updated individually, or by using the internal data buffer, synchronized so that all channels change simultaneously. The channel output mode is set with jumpers in the terminal block for each channel or by register programming. Each D/A converter can be calibrated without removal through software commands and use of the terminal block CALBUS in conjunction with a 5.5-digit multimeter. The on/off terminal block has standard screw termi- nals for fi eld wiring. Refer to the Agilent Technologies Website for instrument driver availability and downloading instructions, as well as for recent product updates, if applicable.
All outputs can be updated with register-level programming to allow fast backplane access. Rates are limited by controller speed and analog settling time. Each channel can be updated indi- vidually, or by using the internal data buffer, synchronized so that all channels change at the same time. The channel output mode is set with jumpers in the terminal block for each channel or by register programming. In-place Calibration Each D/A converter can be cali- brated without removal through software commands and use of the terminal block CALBUS in conjunction with a 5.5-digit multimeter. In addition, a built-in self-test command provides a high level of confi dence that the module is operating properly. Choice of Connectors The easy-to-use on/off terminal block, a feature of QUIC, comes with standard screw terminals for fi eld wiring. Optional crimp and insert or ribbon cable connec- tors are available. Each channel contains a programmable output disconnect relay to open or close the channel. Product Specifi cations DC Voltage Amplitude: ± 16 V max. Resolution: 16 bits (488 µV steps) Monotonic to 2.0 mV Amplitude accuracy (dc): ± (0.05% + 3.0 mV) (90 days) DC Current Range: 0 to ± 20.00 mA Resolution: 16 bit (610 nA steps) Monotonic to 25 µA Accuracy: ± (% value + amps) (calibrated; temperature within ± 5 °C of calibration temperature and same load as at calibration) Output voltage: Compliance voltage: ± 12 V Max open circuit voltage: <18 V Output current: Compliance current: >20 mA @ 0 to ± 12 V derated linearly to 5 mA @ ± 16 mV Short circuit current: <40 mA Differential ripple and noise: <2 µA rms (20 Hz - 250 kHz, into 250 Ω load) AC Output Sample rate: 1 kSa/s per channel Modulation: No Sweep: No Amplitude accuracy (ac): Not specifi ed Standard waveforms: No Arbitrary waveform function: No General Characteristics Settling time: 300 µs (+ full scale to – full scale step, single channel, to rated accuracy) Isolation: 42 Vdc/ac peak (channel-to-chassis or channel-to-channel) Synchronization: Software commands, external trigger inputs, or TTL backplane trigger lines provide a choice of synchronizing event. Each individual channel can be updated by software command or all channels can be updated at the same time based upon a software or hardware trigger.
General Specifi cations VXI Characteristics VXI device type: Register based Data transfer bus: A16 or A24, D16 Size: C Slots: 1 Connectors: P1/2 Shared memory: n/a VXI busses: n/a C-size compatibility: n/a Instrument Drivers See the Agilent Technologies Website http://www.agilent.com/fi nd/inst_drivers for driver availability and downloading. Command module Downloadable fi rmware: Command module A.08 fi rmware rev: I-SCPI Win 3.1: Yes I-SCPI Series 700: Yes C-SCPI LynxOS: Yes C-SCPI Series 700: Yes Panel Drivers: No VXIplug&play Win Yes Framework: VXIplug&play Win 95/NT Yes Framework: VXIplug&play HP-UX No Framework: Module Current I PM I DM +5 V: 0.7 0.01 +12 V: 0.04 0.01 -12 V: 0 0 +24 V: 0.44 0.01 -24 V: 0.44 0.01 -5.2 V: 0 0 -2 V: 0 0 Cooling Slot Watts/slot: 25.4 ∆P mm H2O: 0.10 Air Flow liter/s: 2.0
Ordering Information
Description Product Number 8/16-Channel D/A Converter E1418A Add 8 channels for total of 16, non-isolated* E1418A 001* Convert 8 channels to isolated* E1418A 002* Add 8 channels and convert all 16 to isolated* E1418A 003* Crimp/insert connectors** E1418A A3E** Ribbon cable connectors E1418A A3H 1-Channel Isolation Plug-on for E1418A* E1523A* 8-Non-isolated-channel Expan. Kit for E1418A E1524A 8-Isolated-channel Expan. Kit for E1418A E1525A Service Manual E1418A-OB3 Notes: * You can add isolation to single channels with the E1523A. You can add an 8-channel expansion kit to existing 8-channel units with the E1524A and E1525A. * Factory installed option. Must be ordered with the E1418A. Comes with standard screw terminals. **** Crimp-and-insert contacts are not included. See the Interconnect and Wiring section for information on ordering Crimp-and-Insert Contacts.
www.agilent.com For more information on Agilent Technologies’ products, applications or services, please contact your local Agilent office. The complete list is available at: www.agilent.com/find/contactus Americas Canada (877) 894-4414 Latin America 305 269 7500 United States (800) 829-4444 Asia Pacific Australia 1 800 629 485 China 800 810 0189 Hong Kong 800 938 693 India 1 800 112 929 Japan 0120 (421) 345 Korea 080 769 0800 Malaysia 1 800 888 848 Singapore 1 800 375 8100 Taiwan 0800 047 866 Thailand 1 800 226 008 Europe & Middle East Austria 0820 87 44 11 Belgium 32 (0) 2 404 93 40 Denmark 45 70 13 15 15 Finland 358 (0) 10 855 2100 France 0825 010 700* *0.125 € fixed network rates Germany 01805 24 6333 0.14 €/minute Ireland 1890 924 204 Israel 972-3-9288-504/544 Italy 39 02 92 60 8484 Netherlands 31 (0) 20 547 2111 Spain 34 (91) 631 3300 Sweden 0200-88 22 55 Switzerland (French) 41 (21) 8113811(Opt 2) Switzerland (German) 0800 80 53 53 (Opt 1) United Kingdom 44 (0) 118 9276201 Other European Countries: www.agilent.com/find/contactus Revised: October 24, 2007 Product specifications and descriptions in this document subject to change without notice. © Agilent Technologies, Inc. 2008 Printed in USA, January 8, 2008 5965-5534E www.agilent.com/find/emailupdates Get the latest information on the products and applications you select. www.agilent.com/find/agilentdirect Quickly choose and use your test equipment solutions with confidence. www.agilent.com/find/open Agilent Open simplifies the process of connecting and programming test systems to help engineers design, validate and manufacture electronic products. Agilent offers open connectivity for a broad range of system-ready instruments, open industry software, PC-standard I/O and global support, which are combined to more easily integrate test system development. www.lxistandard.org LXI is the LAN-based successor to GPIB, providing faster, more efficient connectivity. Agilent is a founding member of the LXI consortium. Remove all doubt Our repair and calibration services will get your equipment back to you, performing like new, when prom- ised. You will get full value out of your Agilent equipment through- out its lifetime. Your equipment will be serviced by Agilent-trained technicians using the latest factory calibration procedures, automated repair diagnostics and genuine parts. You will always have the utmost confidence in your measurements. Agilent offers a wide range of ad- ditional expert test and measure- ment services for your equipment, including initial start-up assistance onsite education and training, as well as design, system integration, and project management. For more information on repair and calibration services, go to: www.agilent.com/find/removealldoubt