E010 CK-COMPONENTS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com APu shbu tt on E010 Series Sealed Momentary Pushbutton Switches Features/Benefits
- Process sealed, withstands soldering and cleaning
- Long life contact design
- Snap-fitting plunger available, accepts a variety of caps
- RoHS compliant models available Typical Applications
- Instrumentation
- Telecommunications and networking equipment
- Computers and peripherals Specifications CONTACT RATING: Q contact material: 4 AMPS @ 125 V AC or 28 V DC. See page A-50 for additional ratings. ELECTRICAL LIFE: 40,000 make-and-break cycles at full load. CONTACT RESISTANCE: Below 20 mΩ typ. initial @ 2–4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109Ω min. DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level. OPERATING TEMPERATURE: -30ºC to 75ºC. CAP INSTALLATION FORCE: 10 lbs. max. permissible. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). NOTE: Any models supplied with P, Q, B or G contact material ar e RoHS compliant. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center . Materials CASE & BUSHING: Glass filled nylon 6/6, flame retardant (UL 94V-0). PLUNGER: Glass filled nylon or glass filled polyester (PBT) (UL 94V-0), with internal o-ring seal standard. SWITCH SUPPORT: Brass or steel, matte-tin plated. SWITCH SUPPORT RETAINER: Stainless steel. END CONTACTS: Q contact material: Coin silver, silver plated. See A-50 for additional ratings. CENTER CONTACTS & ALL TERMINALS: Q contact material: Copper alloy, silver plated. See page A-50 for additional ratings. TERMINAL SEAL: Epoxy. HARDWARE: Nut & locking ring-Brass, nickel plated. Lockwasher-Steel, nickel plated. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages A-47 thru A-51. For additional options not shown in catalog, consult Customer Service Center. All models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods. Switch Function E112 SPDT On-Mom. Plunger S .222" high L .338" high M .331" high, snap-fitting Bushing D1 Unthreaded Y Threaded, keyway Contact Material B Gold P Gold, matte-tin Q Silver G Gold over silver Seal E Epoxy Models Available Terminations A Right angle, PC thru-hole AV2 Vertical right angle, PC thru-hole C PC Thru-hole A3 Right angle, snap-in, PC thru-hole AV3 Vertical right angle, snap-in, PC thru-hole R2 Right angle with PCB V3 .460" high, V-bracket V4 .630" high, V-bracket V6 .460" high, V-bracket V8 .953" high, V-bracket V31 .460" high, snap-in V-bracket V81 .953" high, snap-in V-bracket V91 1.150" high, snap-in V-bracket W .750" long, wire wrap Z Solder lug
Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com Pu shbu tt on A Third Angle Projection E010 Series Sealed Momentary Pushbutton Switches SWITCH FUNCTION PLUNGER BUSHING PANEL MOUNTING .120 DIA. (3,05) .120 DIA. (3,05) .224 (5,69) SPDT 2-32-1MOM.ONE112 SP SCHEMATIC CONNECTED TERMINALS POS. 1 POS. 2 SWITCH FUNCTION POS. 1 POS. 2 MODEL NO. NO. POLES SPDT Terminal Nos. For Reference Only Part number shown: E112SD1CQE MOM. = Momentary All models with all options when ordered with G or Q contact material. C&K marking this side C&K marking this side S .218" HIGH D1 UNTHREADED Y THREADED, KEYWAY S plunger standard with D1 bushing. NOTE: Internal o-ring actuator seal standard for all bushing options. L plunger standard with Y bushing. Available only with C, Z terminations. Hardware: One dress nut part number 299D01201, one hex nut and lockwasher supplied standard. Withstands 4 in./lbs. without distortion. NOTE: Caps available for all plunger options, see pages A-50 and A-51. L .338" HIGH M .331" HIGH, SNAP-FITTING Standard with D1 bushing (as shown). † Subtract .100 (2,54) from plunger length when ordered with Y bushing. Standard with Y bushing (as shown). ** Add .100 (2,54) from plunger length when ordered with D1 bushing.
Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com APu shbu tt on Third Angle Projection E010 Series Sealed Momentary Pushbutton Switches TERMINATIONS SECTION A-A .120 DIA. (3,05) .224 (5,69) .120 DIA. (3,05) .224 (5,69) PC MOUNTING PC MOUNTING PC MOUNTING W WIRE WRAP AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150" PITCH A RIGHT ANGLE, PC THRU-HOLE AW RIGHT ANGLE, EXTENDED, PC THRU-HOLEA3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE C PC THRU-HOLE Z SOLDER LUG SPDTSPDT SPDT Not available with P contact materials. NOTE: Terminal bend radii and lead-in manufacturing option. Available with D1 bushing only. NOTE: Terminal bend radii and lead-in manufacturing option. Available with D1 bushing only. E112SD1ABE SPDT E112SD1AV2BE SPDT
Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com Pu shbu tt on A Third Angle Projection E010 Series Sealed Momentary Pushbutton Switches TERMINATIONS .120 DIA. (3,05) .224 (5,69) PC MOUNTING SNAP-IN .120 DIA. (3,05) PC MOUNTING .120 DIA. (3,05) PC MOUNTING V6, V8 VERTICAL MOUNT, V-BRACKET V81 VERTICAL MOUNT, V-BRACKET, SNAP-IN V3, V4 VERTICAL MOUNT, V-BRACKET V31, V91 VERTICAL MOUNT, V-BRACKET, SNAP-IN R2 RIGHT ANGLE WITH PCB E112SD1R2BE SPDT E112SD1__BE SPDT E112SD1__BE SPDT V6 .460 (11,68) V8, V81 .953 (24,21) DIM ‘A’ OPTION CODE V3, V31 .460 (11,68) V4 .630 (16,00) V91 1.150 (29,21) DIM ‘A’ OPTION CODE NOTE: Available with D1 bushing and B contact material only. NOTE: Available with D1 bushing only. NOTE: Available with D1 bushing only.
Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com APu shbu tt on Third Angle Projection E010 Series Sealed Momentary Pushbutton Switches CONTACT MATERIAL SEAL AVAILABLE HARDWARE .200 DIA. (5,08 ).120 (3,05) .155 (3,94) E EPOXY SEAL Cap PART NO.
708901000 WHITE
708902000 BLACK
708903000 RED
Material: Nylon Finish: Gloss Cap PART NO.
752701000 WHITE
752702000 BLACK
752703000 RED
Material: Nylon Finish: Gloss Cap PART NO.
801801000 WHITE
801802000 BLACK
801803000 RED
Material: Nylon Finish: Gloss NOTE: Additional nuts, locking rings and lockwashers available separately, see section “Technical Data and Additional Hardware”. Other cap colors available, consult Customer Service Center. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. 2 END CONTACTS: Coin silver, with gold plate over nickel plate.
3 CENTER CONTACTS & ALL TERMINALS: Coin silver, with gold plate
over nickel plate. 4 END CONTACTS: Coin silver, silver plated. 5 CENTER CONTACTS & ALL TERMINALS: Copper alloy, silver plated. 6 TERMINALS: Copper alloy, with matte-tin over nickel plate. NOTE: Any models supplied with P , Q, B or G contact material are RoHS compliant. All models with all options when ordered with G or Q contact material. B contact material standard with all terminations except C, Z. B contact material must be ordered with R2 terminations. Q contact material standard with C, Z terminations. P contact materials not available with Z terminations. OPTION CODE CONTACT MATERIAL TERMINAL PLATING RATINGS GOLD 1 GOLD 3 GOLD 1 MATTE-TIN 6 LOW LEVEL/DRY CIRCUIT LOW LEVEL/DRY CIRCUIT OR POWER 0.4 VA MAX. @ 20 V AC OR DC MAX. 4 AMPS @ 125 V AC 0R 28 V DC. B P G GOLD OVER SILVER 2,3 SILVER 4,5 SILVER 5 POWER 0.4 VA MAX. @ 20 V AC OR DC MAX. OR 4 AMPS @ 125 V AC 0R 28 V DC. Q
Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com Pu shbu tt on A Third Angle Projection E010 Series Sealed Momentary Pushbutton Switches AVAILABLE HARDWARE .450 SQ. (11,43).195 (4,95) .240 (6,10) TYPICAL APPLICATION Above frames (part nos. 432XXXXXX) are also available with insert which accepts LED for indicator light assembly. Order insert separately from frame. Blank insert panel (without hole for LED) also available. LED not included. Special colors, custom markings available, consult Customer Service Center. PANEL INSERT WITH HOLE FOR LED PART NO. 894901000 894902000 894903000 BLANK PANEL INSERT WITHOUT HOLE FOR LED PART NO.
476601000 WHITE
476602000 BLACK
476603000 RED
.047" (1,19) PANEL THK. PART NO. 432501000 432502263 432503000 .062" (1,57) PANEL THK. PART NO. 432601000 432602263 432603000 .090" (2,29) PANEL THK. PART NO. 432701000 432702263 432703000 .125" (3,18) PANEL THK. PART NO.
432801000 WHITE
432802263 BLACK
432803000 RED
Frames snap into panel opening and ar e independent from switch mounting. Accurate positioning of the PC mounted switch relative to the panel opening is necessary to provide proper clearance between actuator and Panel Inserts Cap, Snap-fitting plunger PART NO.
894001000 WHITE
894002000 BLACK
894003000 RED
Material: Nylon Finish: Gloss Cap, Snap-fitting plunger PART NO.
894101000 WHITE
894102000 BLACK
894103000 RED
Material: Nylon Finish: Gloss Cap PART NO.
484601000 WHITE
484602000 BLACK
484603000 RED
Material: Nylon Finish: Gloss PART NO.
798201000 WHITE
798202263 BLACK
798203000 RED
Material: Nylon Finish: Matte NOTE: Additional nuts, locking rings and lockwashers available separately, see section “Technical Data and Additional Hardware”. Other cap colors available, consult Customer Service Center.