E103J1AE222

E101J1ABE222 CK-COMPONENTS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 14

Technical content

Sealed Miniature Rocker and Lever Handle Switches Models Available Features/Benefits

• Sealed against solder and cleaning process contaminants
• ESD Resistance—all actuator options
• Rocker, case & bushing UL 94V-0
• RoHS compliant Typical Applications
• Telecommunications
• Instrumentation
• Computers & peripherals Specifications CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or DC max. Q contact material (E1XX & E2XX Models): 7.5 AMPS @125 V AC or 28 V DC; 3 AMPS @ 250 V AC. (E3XX Models): 5 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC. See page H-37 for additional ratings. ELECTRICAL LIFE: E1XX and E2XX models: 40,000 make-and-break cycles at full load. E3XX models: 30,000 cycles. CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 Ω min. ELECTROSTATIC DISCHARGE (ESD) OPTION: All actuator options: 15,000 V DC max. @ sea level, actuator to terminals. DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level. OPERATING TEMPERATURE: –30ºC to 85ºC. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). Materials CASE & BUSHING: Glass filled nylon 6/6, flame retardant, heat stabilized (UL 94V-0). ACTUATOR: Nylon, black standard, internal o-ring seal standard with all actuators. FRAME: Spring steel, black standard. SWITCH SUPPORT: Brass or steel, matte-tin plated. ACTUATOR PIVOT & MOUNTING BRACKET: Nylon. ACTUATOR PIVOT RETAINER: Stainless steel. CONTACTS & TERMINALS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Copper alloy, silver plated. See page G-37 for additional contact materials. TERMINAL SEAL: Epoxy. HARDWARE: Nut, Screw & Lockwasher: Stainless steel. Standoff: Nylon standard, aluminum available, consult Customer Service Center. NOTE: Any models supplied with Q, B, G, S, P & R contact material ar e RoHS compliant. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center . Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages G-27 through G-39. For additional options not shown in catalog, consult Customer Service Center. All models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods. Switch Function E101 SP On-None-On E103 SP On-Off-On E105 SP Mom.-Off-Mom. E107 SP On-Off-Mom. E108 SP On-None-Mom. E201 DP On-None-On E203 DP On-Off-On E205 DP Mom.-Off-Mom. E207 DP On-Off-Mom. E208 DP On-None-Mom. E211 DP On-On-On E213 DP On-On-Mom. E215 DP Mom.-On-Mom. E301 3P On-None-On Actuator J1 .531 long rocker J2 Lever J3 .906" long rocker J11 Rocker with frame J21 Lever with frame J50 .362" long rocker J60 Lever J90 Lever Terminations A Right angle, PC thru-hole AV2 Vertical right angle, PC thru-hole C PC Thru-hole Z Solder lug A3 Right angle, snap-in, PC thru-hole AV3 Vertical right angle, snap-in, PC thru-hole V3 .460" high, V-bracket V4 .630" high, V-bracket V5 Vertical right angle, PC thru-hole V6 .460" high, V-bracket V7 .630" high, V-bracket V8 .953" high, V-bracket V21 .555" high, V-bracket, snap-in V31 .460" high, V-bracket, snap-in Contact Material B Gold P Gold, matte tin Q Silver S Silver, matte-tin G Gold over silver R Gold over silver, matte-tin Seal E Epoxy Actuator Color

2 Black

3 Red

NONE No frame color required Metal Frame Color (J11, J21 Actuators) G–26 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com G Rocker

2-1,5-4 N/A OPEN N/A 2-3,5-4 2-3,5-6 ON NONE ON ON OFF ON MOM. OFF MOM. ON OFF MOM. ON NONE MOM. ON ON ON ON ON MOM. MOM. ON MOM. E201 E203 E205 E207 E208 E211 E213 E215 DP SPDT 2-1 N/A OPEN N/A 2-3 ON NONE ON ON OFF ON MOM. OFF MOM. ON OFF MOM. ON NONE MOM. E101 E103 E105 E107 E108 SP SCHEMATIC CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 SWITCH FUNCTION POS. 1 POS. 2 POS. 3 MODEL NO. NO. POLES E Series Sealed Miniature Rocker and Lever Handle Switches SWITCH FUNCTION DPDT SPDT Part number shown: E101J1ZBE2 Part number shown: E201J1ZBE2 Wiring for 3-way switch, Hardware available seperately, see Technical Data section of this catalog.MOM. = Momentary All models with all options when ordered with G, Q, R or S contact material. Terminal Nos. For Reference Only Terminal Nos. For Reference Only C&K marking on opposite sideC&K marking on opposite side G Rocker G–27 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com

G–28 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com G Rocker E Series Sealed Miniature Rocker and Lever Handle Switches SWITCH FUNCTION ACTUATOR–PANEL REAR MOUNT PANEL MOUNTING J1 & J2 Actuators 3PDT 2-1,5-4,8-7N/A2-3,5-6,8-9ON NONE ONE301 3P SCHEMATIC CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 SWITCH FUNCTION POS. 1 POS. 2 POS. 3 MODEL NO. NO. POLES 3PDT C&K marking on opposite sideC&K marking on opposite side Part number shown: E301J1ZBE2 All models with all options when ordered with G, Q, R and S contact material. MOM. = Momentary ** Wiring for 3-way switch, see Technical Data section of this catalog. Terminal Nos. For Reference Only Finish: Matte. Other colors, custom actuator mark- ings and legends available, consult Customer Service Center. NOTE: Hardware: two each—mounting scr ews, nuts, lockwashers and standoffs for 1/8 inch thick panel are supplied standard on switches with panel mounting bracket. Internal o-ring actuator seal standard. Actuators available separately, see page G-37. Hardware available seperately, see Technical Data section of this catalog. J1, J2 actua- tors available with C, Z or Z3 terminations.

G–29 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com E Series Sealed Miniature Rocker and Lever Handle Switches ACTUATOR–REAR MOUNT PANEL MOUNTING Actuator finish: Matte, frame finish: gloss. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Internal o-ring actuator seal standard. Actuators & frames available separately, see page G-37. Hardware available seperately, see Technical Data section of this catalog. N. J11 & J21 actuators available with C, Z & Z3 ter- minations. ACTUATOR–PC MOUNT Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Hardware: two each—mounting screws, nuts, lockwashers and standoffs for 1/8 inch thick panel are supplied standard on switches with panel mounting bracket. Internal o-ring actuator seal standard. Actuators available separately, see page G-37. Hardware available seperately, see Technical Data sec- tion of this catalog. J1, J2 actuators available with A, A3, AV2, AV3, V2-V61 terminations. ACTUATOR COLOR ACTUATOR FRAME COLORACTUATOR ACTUATOR COLOR J11 ROCKER WITH FRAME J21 LEVER WITH FRAME J1 ROCKER J2 LEVER NOTE: This option has reduced anti-static capability. NOTE: This option has reduced anti-static capability.

Sealed Miniature Rocker and Lever Handle Switches ACTUATOR–PC MOUNT PC MOUNTING Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Hardware: two each—mounting screws, nuts, lockwashers and standoffs for 1/8 inch thick panel are supplied standard on switches with panel mounting bracket. Internal o-ring actuator seal standard. Actuators available separately, see page G-37. Hardware available seperately, see Technical Data section of this catalog. J3 actuators available with AV2, AV3 & V2-V61 terminations. Some permissible actua- tor/termination combinations may lack clearance between actuator and PC board, and care must be exercised to accommodate this condition. J50, J60 & J90 actuators available with A, AV2, AV3, V2 – V61 terminations. TERMINATIONS Z SOLDER LUG C PC THRU-HOLE SPDT thru 3PDT SPDT thru 3PDTNot available with P , S, & R contact materials. Available actuators, see page G-37. ACTUATOR COLOR ACTUATOR J3 ROCKER J50 ROCKER J60 LEVER J90 LEVER G–30 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com G Rocker

Sealed Miniature Rocker and Lever Handle Switches TERMINATIONS PC MOUNTING PC MOUNTING Actuator Shown In Pos. 1 SECTION A-A Actuator Shown In Pos. 1 SECTION A-A A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE A RIGHT ANGLE, PC THRU-HOLE A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE A RIGHT ANGLE, PC THRU-HOLE SPDT thru 3PDT Z3 QUICK CONNECT NOTE: Not available with J3 actuator. Available actuators, see pages G-28 and G-30. Terminal bend radii and lead-in manufacturing option. NOTE: Not available with J3, J50, J60 and J90 actuators. Available actuators, see pages G-28 thru G-30. Terminal bend radii and lead-in manufacturing option. Not available with P , S, & R contact materials. Available actuators, see pages G-28 thru G-30. Mating quick connector available; order part number 530100000, page G-38. NOTE: PC mounting pattern must clear switch support leg. E101J1ABE2 Horizontal Actuation SPDT E201J1ABE2 Horizontal Actuation DPDT G Rocker G–31 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com

Sealed Miniature Rocker and Lever Handle Switches TERMINATIONS Actuator Shown In Pos. 1 SECTION A-A PC MOUNTING Actuator Shown In Pos. 1 SECTION A-A PC MOUNTING AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150" PITCH AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH A RIGHT ANGLE, PC THRU-HOLE NOTE: Terminal bend radii and lead-in manufacturing option. Available actuators, see pages G-28 and G-30. NOTE: Terminal bend radii and lead-in manufacturing option. Available actuators, see pages G-28 and G-30. E301J1ABE2 Horizontal Actuation 3PDT E101J1AV2BE2 Vertical Actuation SPDT G–32 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com G Rocker

Sealed Miniature Rocker and Lever Handle Switches TERMINATIONS SECTION A-A Actuator Shown In Pos. 1 Actuator Shown In Pos. 1 SECTION A-A PC MOUNTING PC MOUNTING AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150" PITCH AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150" PITCH AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH NOTE: Terminal bend radii and lead-in manufacturing option. Available actuators, see pages G-28 and G-30. NOTE: Terminal bend radii and lead-in manufacturing option. Available actuators, see pages G-28 and G-30. E301J1AV2BE2 Vertical Actuation 3PDT E201J1AV2BE2 Vertical Actuation DPDT G Rocker G–33 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com

Sealed Miniature Rocker and Lever Handle Switches TERMINATIONS SECTION A-A Actuator Shown In Pos. 1 PC MOUNTING Actuator Shown In Pos. 1 SECTION A-A PC MOUNTING V5 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH NOTE: Terminal bend radii and lead-in manufacturing option. Available actuators, see pages G-28 and G-30. NOTE: Terminal bend radii and lead-in manufacturing option. Available actuators, see pages G-28 and G-30. V5 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH E101J1V5BE2 Vertical Actuation SPDT E201J1V5BE2 Vertical Actuation DPDT G–34 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com G Rocker

Sealed Miniature Rocker and Lever Handle Switches TERMINATIONS PC MOUNTING PC MOUNTING PC MOUNTING V21 VERTICAL MOUNT, V-BRACKET, SNAP-IN V7, V8 VERTICAL MOUNT, V-BRACKET V21 VERTICAL MOUNT, V-BRACKET, SNAP-IN V6, V7, V8 VERTICAL MOUNT, V-BRACKET V21 VERTICAL MOUNT, V-BRACKET, SNAP-IN V6, V7, V8 VERTICAL MOUNT, V-BRACKET NOTE: Available actuators, see pages G-28 and G-30. NOTE: Available actuators, see pages G-28 and G-30. NOTE: Available actuators, see pages G-28 and G-30. V21 .555 (14, 10) V6 .460 (11, 68) V7 .630 (16, 00) V8 .953 (24, 21) DIM ‘A’ OPTION CODE V21 .555 (14, 10) V6 .460 (11, 68) V7 .630 (16, 00) V8 .953 (24, 21) DIM ‘A’ OPTION CODE V21 .555 (14, 10) V7 .630 (16, 00) V8 .953 (24, 21) DIM ‘A’ OPTION CODE E101J1__BE2 SPDT E201J1__BE2 DPDT E301J1__BE2 3PDT G Rocker G–35 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com

G–36 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com G Rocker E Series Sealed Miniature Rocker and Lever Handle Switches TERMINATIONS PC MOUNTING PC MOUNTING PC MOUNTING V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN V3, V4 VERTICAL MOUNT, V-BRACKET VERTICAL MOUNT, V-BRACKET, SNAP-IN V4 VERTICAL MOUNT, V-BRACKET V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN V3, V4 VERTICAL MOUNT, V-BRACKET NOTE: Available actuators, see pages G-28 and G-30. NOTE: Available actuators, see pages G-28 and G-30. NOTE: Available actuators, see pages G-28 and G-30. V3, V31 .460 (11,68) V4 .630 (16,00) DIM ‘A’ OPTION CODE V41 .630 (16,00) DIM ‘A’ OPTION CODE V3, V31 .460 (11,68) V4 .630 (16,00) DIM ‘A’ OPTION CODE E101J1__BE2 SPDT E201J1__BE2 DPDT E301J1__BE2 3PDT

G–37 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com E Series Sealed Miniature Rocker and Lever Handle Switches CONTACT MATERIAL SEAL AVAILABLE HARDWARE J2, J21 Actuators PART NO.

760502263 BLACK

760503000 RED

Material: Nylon Finish: Matte J50 Actuator PART NO. 775A02263 BLACK 775A03000 RED Material: Nylon Finish: Matte J60 Actuator PART NO.

613802263 BLACK

598103000 RED

Material: Nylon Finish: Matte J90 Actuator PART NO.

598002263 BLACK

598003000 RED

Material: Nylon Finish: Matte J3 Actuator PART NO.

766602263 BLACK

766603000 RED

Material: Nylon Finish: Matte J1, J11 Actuators PART NO. 776A02263 BLACK 776A03000 RED Material: Nylon Finish: Matte NOTE: Additional nuts, screws and lockwashers available separately, see Technical Data section of this catalog. Other colors available, consult Customer Service Center. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. 2 END CONTACTS: Coin silver, with gold plate over nickel plate.

3 CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate

over nickel plate. 4 END CONTACTS: Coin silver, silver plated.

5 CENTER CONTACT & ALL TERMINALS: Copper alloy, with gold flash over silver

plate. Or copper alloy, silver plated. 6 TERMINALS: Copper alloy, with matte-tin over nickel plate. NOTE: Any models supplied with Q, B, G, S P & R contact material are RoHS compliant. All models with all options when ordered with G, Q, S & R contact material. B contact material standard with all terminations. P R & S contact materials not available with Z terminations. E EPOXY SEAL OPTION CODE CONTACT MATERIAL TERMINAL PLATING RATINGS SILVER 5 MATTE-TIN 6 GOLD 1 SILVER 4,5 GOLD OVER SILVER 2,3 GOLD 3 MATTE-TIN 6 GOLD 1 MATTE-TIN 7 LOW LEVEL/ DRY CIRCUIT POWER LOW LEVEL/DRY CIRCUIT OR POWER 0.4 VA MAX. @ 20 V AC OR DC MAX. E1XX & E2XX MODELS: 7.5 AMPS @125 V AC OR 28 V DC; 3 AMPS @250 V AC. E3XX MODELS: 5 AMPS @ 125 V AC OR 28 V DC; 2 AMPS @ 250 V AC. E1XX AND E2XX MODELS: 0.4 VA MAX @20 V AC OR DC MAX. OR 7.5 AMPS @125 V AC OR 28 V DC; 3 AMPS @ 250 V AC. DC E3XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR 5 AMPS @ 125 V AC OR 28 V DC; 2 AMPS @ 250 V AC. B P Q S G R

Sealed Miniature Rocker and Lever Handle Switches AVAILABLE HARDWARE .495 – .505 (12,57 – 12,83) .797 – .803 (20,24 – 20,40) .005 R. MAX. (12,57 – 12,83) .595 – .605 (15,11 – 15,37) .005 R. (0,13) MAX. TYP. .495 – .505 (12,57 – 12,83) .620 – .625 (15,75 – 15,88) .005 R. (0,13) MAX. TYP. PANEL MOUNTING For part numbers 4529xxxxx, 4527xxxxx, 4528xxxxx, 4526xxxxx For part numbers 4325xxxxx, 4326xxxxx For part numbers 4327xxxxx, 4328xxxxx TYPICAL APPLICATION Fits Z3 Termination female connector PART NO. 530100000 Available in loose pieces. Frame for J11, J21 Actuators PART NO.

764500746 BLACK ENAMEL

764601106 RETAINING SPRING

Material: Spring Steel J50, J60 & J90 Actuators MATTE PART NO. 486702000 Material: Nylon Finish: Matte or Gloss GLOSS PART NO.

486802000 BLACK

NOTE: Additional nuts, screws and lockwashers available separately, see Technical Data section of this catalog. Other colors available, consult Customer Service Center. Frames snap into panel opening and are independent from switch mounting. Accurate positioning of the PC mounted switch relative to the panel opening is necessary to provide proper clearance between actuator and frame. J1 & J2 Actuators J50, J60 & J90 Actuators .125” (3,18) PANEL THK. PART NO.

452602263 BLACK

452603000 RED

.047” (1,19) PANEL THK. PART NO. 452902263 452903000 .062” (1,57) PANEL THK. PART NO. 452702263 452703000 .090” (2,29) PANEL THK. PART NO. 452802263 452803000 .125” (3,18) PANEL THK. PART NO.

432802263 BLACK

432803000 RED

.047” (1,19) PANEL THK. PART NO. 432502263 432503000 .062” (1,57) PANEL THK. PART NO. 432602263 432603000 .090” (2,29) PANEL THK. PART NO. 432702263 432703000 G–38 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com G Rocker

Sealed Miniature Rocker and Lever Handle Switches Above frames (part nos. 432XXXXXX) are also available with insert which accepts LED for indicator light assembly. Order insert separately from frame. Blank insert panel (without hole for LED) also available. LED not included. Panel Inserts Will fit separate snap-in frames for J50, J60, J90 actuators. NOTE: Special colors, custom markings available, consult Customer Service Center. BLANK PANEL INSERT WITHOUT HOLE FOR LED PART NO.

476602000 BLACK

476603000 RED

PART NO. 894902000 894903000 G Rocker G–39 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com