E1020H 3M | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Cushion-Mount™ Plus Plate Mounting Tapes with Easy Mount Adhesive High Plateside Adhesion E1815H, E1820H E1715H, E1720H E1515H, E1520H E1015H, E1020H, E1040H, E1060H E1315H, E1320H E1915H, E1915HS, E1920H, E1920HS E1215H, E1220H, E1115H, E1120H Technical Data July, 2010 Product Description 3M™ Cushion-Mount™ Plus Plate Mounting Tapes with Easy Mount Adhesive High Plateside Adhesion are designed for mounting flexographic print plates to cylinders or sleeves. This family of foam mounting tapes provides excellent print quality for process, combination, and solid printing. Features • Offers a complete range of foam densities providing excellent print quality from process to combination to solid printing.

  • Consistent caliper control allows the printer to use multiple foam densities on a print job to optimize print quality.
  • Use the 3M proprietary Easy Mount liner, creating micro-channels in both adhesive surfaces. The crosshatched pattern creates a continuous and permanent network of micro-channels in the adhesive, allowing air to escape from between the tape and cylinder/sleeve and between the tape and plate.
  • The adhesive on the linered side (plate side) of the tape is designed for mounting of photopolymer plates, excellent holding power on-press with high plateside adhesion and clean plate removal when demounting.
  • The adhesive on the non-linered side (cylinder side) of the tape is designed for mounting to flexographic printing cylinders or sleeves, providing easy application at mounting and clean removability when demounting.

3M ™ Cushion-Mount™ Plus Plate Mounting Tapes with Easy Mount Adhesive High Plateside Adhesion E1815H • E1820H • E1715H • E1720H • E1515H • E1520H • E1015H • E1020H • E1040H • E1060H E1315H • E1320H • E1915H • E1920H • E1920HS • E1215H • E1220H • E1115H • E1120H - 2 - Typical Physical Properties and Performance Characteristics Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. 3M™ Cushion-Mount™ Plus 3M™ Cushion-Mount™ Plus 3M™ Cushion-Mount™ Plus Firm Combination Medium Firm Combination Medium Combination Plate Mounting Tapes Plate Mounting Tapes Plate Mounting Tapes Product E1815H E1820H E1715H E1720H E1515H E1520H Adhesive Differential Acrylate Differential Acrylate Differential Acrylate Polyethylene Carrier Firm Blue Foam Medium Firm Teal Foam Medium Purple Foam Type of Printing Combination of solid Combination of solid Combination of solid and line with minimal and line with tone and line with tone tone reproduction reproduction and reproduction and fine reverses fine reverses Thickness Roll Length yd 25 25 25 25 25 25 Maximum Width in 54 54 54 54 54 54 Minimum Width in 2 2 2 2 2 2 Slitting Tolerance in ±1/32 ±1/32 ±1/32 ±1/32 ±1/32 ±1/32 Density lb/ft 3 32 32 30 30 29 29 Compression Deflection 10% Compression lb/in 2 35 35 30 30 26 26 25% Compression lb/in 2 60 60 50 50 40 40 Durometer ASTM-D2240 72 72 68 68 67 67 Shore A Peel Adhesion (Modified ASTM-D3330) Non-linered side - oz/in 55 55 55 55 55 55 Stainless Steel (N/100mm) (60) (60) (60) (60) (60) (60) Non-linered side - oz/in 65 65 65 65 65 65 Composite Sleeve (N/100mm) (71) (71) (71) (71) (71) (71) Non-linered side - oz/in 68 68 68 68 68 68 Non-linered side - oz/in 70 70 70 70 70 70 Non-linered side - oz/in 60 60 55 55 55 55 Peel Adhesion (Modified ASTM-D3330) Linered side - oz/in 70 70 70 70 70 70 Photopolymer (N/100mm) (77) (77) (77) (77) (77) (77) Solvent Resistance Water Excellent Excellent Excellent Excellent Excellent Excellent Alkanes Excellent Excellent Excellent Excellent Excellent Excellent Alcohols Good Good Good Good Good Good Acetates Fair Fair Fair Fair Fair Fair Heat Resistance °F 120 120 120 120 120 120

3M™ Cushion-Mount™ Plus 3M™ Cushion-Mount™ Plus 3M™ Cushion-Mount™ Plus Standard Combination Standard Combination Medium Soft Process Plate Mounting Tapes Plate Mounting Tapes Plate Mounting Tapes Product E1015H E1020H E1040H E1060H E1315H E1320H Adhesive Differential Acrylate Differential Acrylate Differential Acrylate Polyethylene Carrier Standard White Foam Standard White Foam Medium Soft Y ellow Foam Type of Printing Combination of solids and Combination of solids and Combination of solids and tone reproduction where tone reproduction where tone reproduction where solids and process are solids and process are process printing is equally important equally important important Thickness Roll Length yd 25 25 50 ft. 50 ft. 25 25 Maximum Width in 54 54 54 54 54 54 Minimum Width in 2 2 2 2 2 2 Slitting Tolerance in ±1/32 ±1/32 ±1/32 ±1/32 ±1/32 ±1/32 Density lb/ft 3 28 28 28 28 27 27 Compression Deflection 10% Compression lb/in 2 15 15 15 15 12 12 25% Compression lb/in 2 30 30 25 25 25 25 Durometer ASTM-D2240 65 65 40 38 63 63 Shore A Peel Adhesion (Modified ASTM-D3330) Non-linered side - oz/in 55 55 55 65 55 55 Stainless Steel (N/100mm) (60) (60) (60) (71) (60) (60) Non-linered side - oz/in 65 65 58 65 65 65 Composite Sleeve (N/100mm) (71) (71) (63) (71) (71) (71) Non-linered side - oz/in 60 60 55 65 60 60 Non-linered side - oz/in 80 80 70 80 80 80 Non-linered side - oz/in 65 65 50 55 65 65 Peel Adhesion (Modified ASTM-D3330) Linered side - oz/in 70 70 45 35 70 70 Photopolymer (N/100mm) (77) (77) (50) (38) (77) (77) Solvent Resistance Water Excellent Excellent Excellent Excellent Excellent Excellent Alkanes Excellent Excellent Excellent Excellent Excellent Excellent Alcohols Good Good Good Good Good Good Acetates Fair Fair Fair Fair Fair Fair Heat Resistance °F 120 120 120 120 120 120 - 3 - Typical Physical Properties and Performance Characteristics Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. 3M ™ Cushion-Mount™ Plus Plate Mounting Tapes with Easy Mount Adhesive High Plateside Adhesion E1815H • E1820H • E1715H • E1720H • E1515H • E1520H • E1015H • E1020H • E1040H • E1060H E1315H • E1320H • E1915H • E1920H • E1920HS • E1215H • E1220H • E1115H • E1120H

  • 4 - Typical Physical Properties and Performance Characteristics Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. 3M™ Cushion-Mount™ Plus 3M™ Cushion-Mount™ Plus 3M™ Cushion-Mount™ Plus Light Medium Combination Light Medium Combination Light Combination Plate Mounting Tapes Plate Mounting Tape Plate Mounting Tapes Product E1915H E1920H E1915HS E1920HS E1215H E1220H Adhesive Differential Acrylate Differential Acrylate Differential Acrylate Polyethylene Carrier Light Medium Pink Foam Light Medium Pink Foam Light Orange Type of Printing Combination of solids Combination of solids Combination of solids and tone reproduction and tone reproduction and tone reproduction where process printing where process printing where process printing is important is important is important Thickness Roll Length yd 25 25 25 25 25 25 Maximum Width in 54 54 54 54 54 54 Minimum Width in 2 2 2 2 2 2 Slitting Tolerance in ±1/32 ±1/32 ±1/32 ±1/32 ±1/32 ±1/32 Density lb/ft 3 26 26 26 26 25 25 Compression Deflection 10% Compression lb/in 2 10 10 10 10 8 8 25% Compression lb/in 2 20 20 20 20 17 17 Durometer ASTM-D2240 60 60 60 60 58 58 Shore A Peel Adhesion (Modified ASTM-D3330) Non-linered side - oz/in 30 30 55 55 3 5 35 Stainless Steel (N/100mm) (33) (33) (60) (60) (3 8) (38) Non-linered side - oz/in 28 28 65 65 34 34 Composite Sleeve (N/100mm) (31) (31) (71) (71) (38) (38) Non-linered side - oz/in 35 35 50 50 44 44 Non-linered side - oz/in 45 45 75 75 65 65 Non-linered side - oz/in 35 35 70 70 44 44 Peel Adhesion (Modified ASTM-D3330) Linered side - oz/in 70 70 70 70 70 70 Photopolymer (N/100mm) (77) (77) (77) (77) (77) (77) Solvent Resistance Water Excellent Excellent Excellent Excellent Excellent Excellent Alkanes Excellent Excellent Excellent Excellent Excellent Excellent Alcohols Good Good Good Good Good Good Acetates Fair Fair Fair Fair Fair Fair Heat Resistance °F 120 120 120 120 120 120 3M ™ Cushion-Mount™ Plus Plate Mounting Tapes with Easy Mount Adhesive High Plateside Adhesion E1815H • E1820H • E1715H • E1720H • E1515H • E1520H • E1015H • E1020H • E1040H • E1060H E1315H • E1320H • E1915H • E1920H • E1920HS • E1215H • E1220H • E1115H • E1120H
  • 5 - Typical Physical Properties and Performance Characteristics Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. 3M™ Cushion-Mount™ Plus Process Plate Mounting Tapes Product E1115H E1120H Adhesive Differential Acrylate Polyethylene Carrier Soft Tan Foam Type of Printing Tone reproduction where where process printing is important Application Thickness in 0.015 0.020 Thickness Tape in 0.017 0.022 Film Liner in 0.0045 0.0045 Lot to Lot Tolerance in ±0.0015 ±0.0015 Typical Application Area in ±0.0004 ±0.0004 Caliper Variation (mm) (±0.010) (±0.010) Roll Length yd 25 25 (m) (22.9) (22.9) Maximum Width in 54 54 Minimum Width in 2 2 (mm) (50.8) (50.8) Slitting Tolerance in ±1/32 ±1/32 Density lb/ft 3 24 24 Compression Deflection 10% Compression lb/in 2 55 (kPa) (35) (35) 25% Compression lb/in 2 10 10 (kPa) (70) (70) Durometer ASTM-D2240 55 55 Shore A Peel Adhesion (Modified ASTM-D3330) Non-linered side - oz/in 30 30 Stainless Steel (N/100mm) (33) (33) Non-linered side - oz/in 28 28 Composite Sleeve (N/100mm) (31) (31) Non-linered side - oz/in 35 35 Polyester (N/100mm) (39) (39) Non-linered side - oz/in 50 50 Urethane - A (N/100mm) (55) (55) Non-linered side - oz/in 35 35 Urethane - B (N/100mm) (39) (39) Peel Adhesion (Modified ASTM-D3330) Linered side - oz/in 70 70 Photopolymer (N/100mm) (77) (77) Solvent Resistance Water Excellent Excellent Alkanes Excellent Excellent Alcohols Good Good Acetates Fair Fair Heat Resistance °F 120 120 (°C) (49) (49) 3M ™ Cushion-Mount™ Plus Plate Mounting Tapes with Easy Mount Adhesive High Plateside Adhesion E1815H • E1820H • E1715H • E1720H • E1515H • E1520H • E1015H • E1020H • E1040H • E1060H E1315H • E1320H • E1915H • E1920H • E1920HS • E1215H • E1220H • E1115H • E1120H

Storage Store under normal conditions of 60° to 80°F (16° to 27°C) and 40 to 60% relative humidity in the original carton. Shelf Life To obtain best performance, use all products, except 3M™ Cushion-Mount™ Plus Plate Mounting Tapes with Easy Mount Adhesive High Plateside Adhesion E1040H and E1060H, within two years from date of manufacture. For Cushion- Mount Tapes E1040H and E1060H use within one year from date of manufacture. - 6 - Recycled Paper 40% pre-consumer 10% post-consumer Industrial Adhesives and Tapes Division 3M Center, Building 225-3S-06 St. Paul, MN 55144-1000 800-362-3550 • 877-369-2923 (Fax) www.3M.com/flexo 3M and Cushion-Mount are trademarks of 3M Company. Printed in U.S.A. ©3M 2010 70-0709-5379-2 (7/10) The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Technical Information Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price. Warranty, Limited Remedy, and Disclaimer Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. Limitation of Liability This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001:2000 standards. ISO 9001:2000 Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method of application. Product Use 3M ™ Cushion-Mount™ Plus Plate Mounting Tapes with Easy Mount Adhesive High Plateside Adhesion E1815H • E1820H • E1715H • E1720H • E1515H • E1520H • E1015H • E1020H • E1040H • E1060H E1315H • E1320H • E1915H • E1920H • E1920HS • E1215H • E1220H • E1115H • E1120H