3148559 MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
Page <1> V1.011/09/20 TACT Switch DTS Series Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Features:
- Sharp click feel with a positive tactile feedback
- Due to small movement distance (stroke), user experiences distinct sensation when the switch "clicks" into place
- Ultraminiature and light weight structure suitable for high density mounting. Economic but high reliability
- Insert moulding in the contact with special treatment prevents flux build-up during soldering and permits auto-dipping Specifications: Mechanical: Operation Force : 260 ±50gf Red (R) 100 ±50gf Black (K) Stroke : (6 × 6) 0.25 (+0.2mm/-0.1mm) Operating Temperature Range : -25°C to +70°C Storage Temperature Range : -30°C to +80°C Electrical: Electrical Life : 50,000 cycles for 260gf 500,000 cycles for 100gf Contact Resistance : 100mΩ maximum Insulation Resistance : 100MΩ minimum at 500V DC Dielectric Strength : 250V AC/1 minute Contact Arrangement : 1 Pole 1 throw Materials: Cover : Steel, tin plated Base : Nylon thermoplastic Colour : Black Stem : Nylon thermoplastic Colour : Black (100gf) and Red (260gf) Contact Disc : Phosphor bronze with silver cladding Terminal : Brass with silver cladding
Page <2> V1.011/09/20 TACT Switch DTS Series Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro General Tolerance Maximum ±0.20mmDimensions : Millimetres (Inches) PCB Layout Circuit Diagram DTSL-61R-B
Page <3> V1.011/09/20 TACT Switch DTS Series Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Dimensions : Millimetres (Inches) General Tolerance Maximum ±0.20mm PCB Layout Circuit Diagram DTSGL-61K-B
Page <4> V1.011/09/20 TACT Switch DTS Series Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Part Number Table Description Rating Part Number Tactile Switch, SPNO, SMD 50mA at 12V DC DTSGL-61K-B DTSL-61R-B Soldering Process: Hand Soldering : Use a soldering iron of 30 watts, controlled at 608°F (320°C) approximately 2 seconds while applying solder Reflow Soldering : When applying reflow soldering, the peak temperature or the reflow oven should be set to 240°C maximum Condition for soldering (Reflow and non-washable type) Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019.