DTE010 EICHHOFF | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
EICHHOFF Kondensatoren GmbH - Heidgraben 4 - 36110 Schlitz - Germany sales@eichhoff.de www.eichhoff.de Abmessungen / Dimensions H H1 Teile-Nr. Part number Référence B L L1 D E C F Type Nenninduktivität Rated inductance Inductance nominale 6 A 1,6 A 2,5 A 1,25 mH 340 m /g58 82 m /g58 118 m /g58 1,0 mH Gleichstromwider- stand DC resistance Résistance c.c. 280 m /g58 I II III I II III I II III I II III DTE010-520/000 DTE010-522/000 DTE010-523/000 DTM010-525/000 DTM010-527/000 DTM010-528/000 DTM010-530/000 DTM010-531/000 DTM010-532/000 DTM010-535/000 DTM010-536/000 DTM010-537/000 42,5 42.5 42,5 42,5 2,7 2,7 3,2 3,2 3,2 3,2 3,2 3,2 9,6 9,6 A 4 A 2,0 mH Nennstrom Rated current Courant nominale 2,8 mH Type I Type II Type III Thyristor-Entstördrosseln Thyristor noise suppression chokes Selfs antiparasitage thyristor
EICHHOFF Kondensatoren GmbH - Heidgraben 4 - 36110 Schlitz - Germany sales@eichhoff.de www.eichhoff.de Nennspannung: AC 250 V Induktivitätsabweichung: +20%; -20% Gleichstromwiderstand: Richtwerte bei /g45u = 20°C Anwendungsklasse: 25/085/21-C nach IEC 60068-1 Anschlüsse: Anschlußstifte im Rastermaß Thyristor-Enstördrosseln sind mit Kernblechen aus zwei Werkstoffen unterschiedlicher Zusammensetzung aufgebaut. Als Wicklungsträger dient ein Spulenkörper aus hochwertigem Kunststoff. Das System wird in ein Kunststoffgehäuse eingesetzt und mit Epoxidharz vergossen. Rated voltage: AC 250 V Inductance tolerance: +20%; -20% DC resistance: Average values at /g45u = 20 °C Climatic classification: 25/085/21-C acc. to IEC 60068-1 Connections: Pins in grid Thyristor chokes are made of laminates of two different materials. The wire is wound on a coil former of high quality plastic. The system is put into housing and is then potted with epoxy. Tension nominale: c. a. 250 V Tolérances des inductances: +20%; -20% Résistance c.c.: Valeurs indicatives à /g45u = 20°C Classification climatique: 25/085/21-C aprés IEC 60068-1 Connexions: Picots en grille Les selfs thyristor sont construites avec des tôles de deux matériels differents. Une carcasse d’une matière plastique de haute qualité sert de support d’enroulement. Le système est mis dans un boîtier et alors il est moulé avec de la résine. Bemessung der Drosseln nach Chokes designed to Selfs dimensionées selon /g3 K o n d e n s a t o r e n G m b H EN 60938-2 ; -E :9