DTC114E UTC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
UTC DTC114E NPN DIGITAL TRANSISTOR UTC UNISONIC TECHNOLOGIES CO. LTD 1 QW-R206-047,A NPN DIGITAL TRANSISTOR (BUILT-IN RESISTORS)
FEATURES
*Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see equivalent circuit). *The bias resistors consist of thin-film resistors with complete isolation to allow positive biasing of the input They also have the advantage of almost completely eliminating parasitic effects. *Only the on / off conditions need to be set for operation, making device design easy. EQUIVALENT CIRCUIT IN OUT OUT IN GND GND MARKING SOT-23 1 : G N D 2 : I N 3 : O U T ABSOLUTE MAXIMUM RATINGS ( Ta=25°C ) PARAMETER SYMBOL RATING UNIT Supply Voltage V CC 50 V Input Voltage V IN -10~+40 V IO 50 Output Current IC(Max) 100 mA Power Dissipation P d 200 mW Junction Temperature T j 150 °C Storage Temperature T stg -55 ~ +150 °C ELECTRICAL CHARACTERISTICS(Ta=25°C) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT VI(off) VcC=5V,IO= 100μA 0.5 Input Voltage VI(on) V O=0.3V,IO= 10mA 3 V Output Voltage V O(on) I O/II= 10mA/0.5 mA 0.1 0.3 V Input Current I I V I= 5V 0.88 mA Output Current I O(off) V CC=50V , VI=0V 0.5 μA DC Current Gain G I V O= 5V,IO= 5mA 30 Input Resistance R 1 7 10 13 kΩ Resistance Ratio R 2/R1 0.8 1 1.2 Transition Frequency f T V CE= 10 V, IE=-5mA,f=100MHz * 250 MHz *Transition frequency of the device CB4
UTC DTC114E NPN DIGITAL TRANSISTOR UTC UNISONIC TECHNOLOGIES CO. LTD 2 QW-R206-047,A ELECTRICAL CHARACTERISTIC CURVES 25℃ 100℃ 100 500m 200m 100m 500μ 2m 5m 10m 20m 50m 100m 1m Ta= - 40℃ Vo=0.3V 100μ Fig.1 Input voltage vs.output current (ON characterristics) 500 200 100 Vo=5V Output Current :Io(A) Fig.3 DC current gain vs.output current Output Current :Io(A) 10m 500μ 200μ 100 μ Vcc=5V Fig.2 Output current vs Input voltage .(OFF characterristics) Input Voltage :VI(OFF) V 500m 200m 100m 50m 20m 10m lo/lI=20 Fig.4 Output voltage vs.output current Output Current :Io(A) Input Voltage :VI(ON) V Output Current :Io(A) DC Current Gain: GI Output Voltage :VO(ON) V 2m 5m 10m 20m 50m 100m 1m 200μ 500μ 2m 5m 10m 20m 50m 100m 1m 100μ 200μ 50μ 10μ 20μ 25℃ -40℃ Ta= 100℃ 25℃ -40℃ Ta= 100℃ 25℃ -40℃ Ta= 100℃ 200μ 500μ 100μ UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.