DTB123YL-AE3-R

DTB123Y UTC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

UNISONIC TECHNOLOGIES CO., LTD DTB123Y PNP SILICON TRANSISTOR w w w . u n i s o n i c . c o m . t w 1 of 3 Copyright © 2005 Unisonic Technologies Co., Ltd QW-R220-019,A DIGITAL TRANSISTORS (BUILT- IN BIAS RESISTORS) „ FEATURES * Built-in bias resistors that implies easy ON/OFF applications. * The bias resistors are thin-film resistors with complete isolation to allow positive input. „ EQUIVALENT CIRCUIT OUT GND (+) OUT GND IN IN R1=2.2KΩ R2=10KΩ SOT-23 SOT-323 *Pb-free plating product number:DTB123YL „ ORDERING INFORMATION Order Number Pin Assignment Normal Lead Free Plating Package 1 2 3 Packing DTB123Y-AE3-R DTB123YL-AE3-R SOT-23 G I O Tape Reel DTB123Y-AL3-R DTB123YL-AL3-R SOT-323 G I O Tape Reel DTB123YL-AE3-R (1)Packing Type (2)Package Type (1) R: Tape Reel (2) AE3: SOT-23, AL3: SOT-323 (3)Lead Plating (3) L: Lead Free Plating , Blank: Pb/Sn „ MARKING BC3Y

DTB123Y PNP SILICON TRANSISTOR UNISONIC TECHNOLOGIES CO., LTD 2 of 3 www.unisonic.com.tw QW-R220-019,A „ ABSOLUTE MAXIMUM RATINGS (Ta=25°C) PARAMETER SYMBOL RATINGS UNIT Supply Voltage V CC -50 V Input Voltage V IN -12 ~ +5 V Output Current I C -500 mA Power Dissipation P D 200 mW Junction Temperature T J +150 °C Storage Temperature T STG -55 ~ +150 °C Note Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. „ ELECTRICAL SPECIFICATIONS (Ta=25°C, unless others specified) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT VIN(OFF) V CC =-5V, IOUT =-100µA -0.3Input Voltage VIN(ON) V OUT =-0.3V, IOUT =-20mA -2 V Output Voltage V OUT(ON) I OUT/IIN =-50mA/-2.5mA -0.1 -0.3 V Input Current I IN V IN=-5V -3.0 mA Output Current I OUT(OFF) V CC =-50V, VIN =0V -0.5 µA DC Current Gain h FE V OUT =-5V, IOUT =-50mA 56 Input Resistance R 1 1.54 2.2 2.86 K Ω Resistor Ratio R 2/R1 3.6 4.5 5.5 Transition Frequency (Note) f T V CE =-10V, IE =50mA, f=100MHz 200 MHz Note: Transition frequency of the device

DTB123Y PNP SILICON TRANSISTOR UNISONIC TECHNOLOGIES CO., LTD 3 of 3 www.unisonic.com.tw QW-R220-019,A „ TYPICAL CHARACTERISTICS -100 -50 -20 -10 -500m -200m -100m Output Current , IOUT (mA) Input Voltage vs. Output Current (ON Characteristics) Ta=-40¥ 25¥ 100¥ VOUT=-0.3V Input Voltage, VIN (ON) (V) -10m 25¥ Ta=100¥ -40¥ VCC=-5V-5m -2m -1m -50DŽ -200DŽ -100DŽ -50DŽ -20DŽ -10DŽ -5DŽ -2DŽ -1DŽ -2.5 -3.0 Output Current, IOUT (A) Input Voltage , VIN(OFF) (V) Output Current vs. Input Voltage (OFF Characteristics) 1000 500 Output Current , IOUT (mA) -40¥ 25¥ Ta=100¥ VOUT=-5V 200 100 DC Current Gain, hFE DC Current Gain vs. Output Current -1000 -500 Output Current , IOUT (mA) -40¥ 25¥ Ta=100¥-200 -100 -50 -20 -10 Output Voltage, VOUT(ON) (mV) Output Voltage vs. Output Current lOUT/lIN=20 UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.