DTB114E UTC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

UNISONIC TECHNOLOGIES CO., LTD DTB114E PNP SILICON TRANSISTOR w w w . u n i s o n i c . c o m . t w 1 of 3 Copyright © 2005 Unisonic Technologies Co., Ltd QW-R206-042,B DIGITAL TRANSISTORS (BUILT-IN BIAS RESISTORS) „ FEATURES * Built-in bias resistors that implies easy ON/OFF applications. * The bias resistors are thin-film resistors with complete isolation to allow positive input. „ EQUIVALENT CIRCUIT OUT GND(+) OUT GND(+) IN IN SOT-23 SOT-323 *Pb-free plating product number:DTB114EL „ ORDERING INFORMATION Order Number Pin Assignment Normal Lead Free Plating Package 1 2 3 Packing DTB114E-AE3-R DTB114EL-AE3-R SOT-23 G I O Tape Reel DTB114E-AL3-R DTB114EL-AL3-R SOT-323 G I O Tape Reel DTB114EL-AE3-R (1)Packing Type (2)Package Type (1) R: Tape Reel (2) AE3: SOT-23, AL3: SOT-323 (3)Lead Plating (3) L: Lead Free Plating , Blank: Pb/Sn „ MARKING BB4

DTB114E PNP SILICON TRANSISTOR UNISONIC TECHNOLOGIES CO., LTD 2 of 3 www.unisonic.com.tw QW-R206-042,B „ ABSOLUTE MAXIMUM RATINGS (Ta = 25Ċ) PARAMETER SYMBOL RATING UNIT Supply Voltage V CC -50 V Input Voltage V IN -40~+10 V Output Current IOUT -500 mA Power Dissipation PD 200 mW Junction Temperature T J 150 °C Storage Temperature T STG -55 ~ +150 °C Note Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. „ ELECTRICAL CHARACTERISTICS (Ta= 25Ċ, unless otherwise specified.) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT VIN(OFF) VCC= -5V, IOUT= -100DŽA -0.5 Input Voltage VIN(ON) V OUT= -0.3V, IOUT= -10mA -3 V Output Voltage V OUT(ON) IOUT/IIN= -0mA/-.5 mA -0.1 -0.3 V Input Current I IN V IN= -5V -0.88 mA Output Current I OUT(OFF) V CC= -50V , VIN=0V -0.5 µA DC Current Gain h FE VOUT= -5V, IOUT= -5mA 56 Input Resistance R 1 7 10 13 k Ω Resistance Ratio R 2/R1 0.8 1 1.2 Transition Frequency f T VCE= -10 V, IE=5mA, f=100MHz

200 MHz

*Transition frequency of the device

DTB114E PNP SILICON TRANSISTOR UNISONIC TECHNOLOGIES CO., LTD 3 of 3 www.unisonic.com.tw QW-R206-042,B µ TYPICAL CHARACTERISTICS -100 -50 -20 -10 -500m -200m -100m -1000 -500 -200 -100 -50 -20 -10 -10 -0.5 -0.2 -0.1 -0.05 -0.02 -0.01 -0.005 -0.002 -0.001 Vcc= - 5V 25Ċ Ta=100Ċ -40Ċ VoUT= - 0.3V Ta=-40Ċ 25Ċ 100Ċ Io/II=20 Ta=-100Ċ 25Ċ -40Ċ -0 .5 0 500 200 100 VoUT= - 5V Ta=100Ċ 25Ċ -40Ċ Input Voltage vs. Output Current (ON Characterristics) Output Current , IoUT(mA) Input Voltage, V I(ON) (V) Output Current vs. Input Voltage (OFF Characterristics) Input Voltage, VI(OFF) (V) Output Current, IoUT(m A) DC Current Gain vs. Output Current Output Current, IoUT (mA) Output Voltage vs. Output Current Output Current , IoUT (mA) DC Current Gain, hFE Output Voltage, V O(ON)(m UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.