DTB113Z UTC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
UNISONIC TECHNOLOGIES CO., LTD DTB113Z PNP SILICON TRANSISTOR w w w . u n i s o n i c . c o m . t w 1 of 3 Copyright © 2011 Unisonic Technologies Co., LTD QW-R206-092.C DIGITAL TRANSISTOR (BUILT-IN RESISTORS) FEATURES * Built-in Bias Resistors that Implies Easy ON/OFF Applications. * The Bias Resistors Are Thin-Film Resistors with Complete Isolation to Allow Positive Input. EQUIVALENT CIRCUIT SOT-23 ORDERING INFORMATION Order Number Package Pin Assignment Packing Lead Free Halogen Free 1 2 3 DTB113ZL-AE3-R DTB113ZG-AE3-R SOT-23 G I O Tape Reel (1) R: Tape Reel (2) AE3: SOT-23 (3) G: Halogen Free, L: Lead Free DTB113ZL-AE3-R (1)Packing Type (2)Package Type (3)Lead Free MARKING
DTB113Z PNP SILICON TRANSISTOR UNISONIC TECHNOLOGIES CO., LTD 2 of 3 www.unisonic.com.tw QW-R206-092.C ABSOLUTE MAXIMUM RATING (TA=25°C) PARAMETER SYMBOL RATINGS UNIT Supply Voltage V CC -50 V Input Voltage V IN -10 ~ +5 V Output Current I C -500 mA Power Dissipation P D 200 mW Junction Temperature T J 150 °C Storage Temperature T STG -55 ~ +150 °C Note Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL CHARACTERISTICS (TA=25°C) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT Input Voltage VIN(OFF) V CC= -5V, IOUT= -100μA -0.3 V VIN(ON) V OUT= -0.3V, IOUT= -20mA -3 Output Voltage V OUT(ON) I OUT/IIN= -50mA/-2.5mA -0.3 V Input Current I IN V IN=-5V -7.2 mA Output Current I OUT(OFF) V CC=-50V, VIN=0V -0.5 μA DC Current Gain h FE V OUT=-5V, IOUT=-50mA 56 Input Resistance R 1 0.7 1 1.3 K Ω Resistance Ratio R 2/R1 8 10 12 Transition Frequency f T V CE=-10V, IE= 50mA, f=100MHz(Note) 200 MHz Note: Transition frequency of the device
DTB113Z PNP SILICON TRANSISTOR UNISONIC TECHNOLOGIES CO., LTD 3 of 3 www.unisonic.com.tw QW-R206-092.C TYPICAL CHARACTERISTICS TA=-40 100 Input Voltage vs. Output Current (ON Characteristics) Output Current, IOUT (mA) -100m -200m -500m -10 -20 -50 -100 Input Voltage, VIN(on) (V) VOUT=-0.3V VCC=-5V TA=100 -40 -0.001 -0.002 -0.005 -0.01 -0.02 -0.05 -0.1 -0.2 -0.5 -10 Input voltage, VIN(off) (V) Output Current vs. Input Voltage (OFF Characteristics) Output Current, IOUT (mA) TA=100 -40 IOUT/IIN=20 Output Current, IOUT (mA) -10 -20 -50 -100 -200 -500 -1000 Output voltage, VOUT(on) (mV) Output Voltage vs. Output Current TA=100 -40 VOUT=-5V -0.5 -2 -5 -10 -20 -50 -100 -200 -500 Output current, IOUT (mA) 100 200 500 DC Current Gain vs. Output Current DC Current Gain, hFE UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.