DTA201 FS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

(INPUT) PIN 3 COLLECTOR (OUTPUT) PIN 2 EMITTER (GROUND) R 2 PNP Silicon Surface Mount Transistors with Monolithic Bias Resistor Network This new series of digital transistors is designed to replace a single device and its external resistor bias network. The BRT (Bias Resistor Transistor) contains a single transistor with a monolithic bias network consisting of two resistors; a series base resistor and a base-emitter resistor. The BRT eliminates these individual components by integrating them into a single device. The use of a BRT can reduce both system cost and board space. The device is housed in the SOT-23 package which is designed for low power surface mount applications.

  • Simplifies Circuit Design
  • Reduces Board Space
  • Reduces Component Count
  • The SOT-23 package can be soldered using wave or reflow. The modified gull-winged leads absorb thermal stress during soldering eliminating the possibility of damage to the die.
  • Available in 8 mm embossed tape and reel. Use the Device Number to or der the 7 inch/3000 unit reel. Replace “T1” with “T3” in the Device Number to order the 13 inch/10,000 unit reel. MAXIMUM RATINGS (TA = 25 C unless otherwise noted) Rating Symbol Value Unit Collector-Base Voltage VCBO 50 Vdc Collector-Emitter Voltage VCEO 50 Vdc Collector Current IC 100 mAdc THERMAL CHARACTERISTICS Characteristic Symbol Max Unit Total Device Dissipation TA = 25 C Derate above 25 C PD 246 (Note 1.) 400 (Note 2.) 1.5 (Note 1.) 2.0 (Note 2.) mW C/W Thermal Resistance – Junction-to-Ambient RθJA 508 (Note 1.) 311 (Note 2.) C/W Thermal Resistance – Junction-to-Lead RθJL 174 (Note 1.) 208 (Note 2.) C/W Junction and Storage Temperature Range TJ, Tstg –55 to +150 C 1. F R–4 @ Minimum Pad 2. F R–4 @ 1.0 x 1.0 inch Pad SOT-23
  • We declare that the material of product compliance with RoHS requirements. Bias Resistor Transistors 2007. 12. 18 1/7 SEMICONDUCTOR TECHNICAL DATA DTA201 ~ DTA214 / DTA217 / DTA223 Revision No : 0

ODERING INFORMATION (DEVICE MARKING AND RESISTOR VALUES) ICBO - - 100 nAdc Collector-Emitter Cutoff Current (VCE = 50 V, IB = 0) ICEO - - 500 nAdc Emitter-Base Cutoff Current (VEB = 6.0 V, IC = 0) IEBO 0.5 0.1 0.2 0.1 0.2 0.9 1.9 4.3 2.3 1.5 0.18 0.13 mAdc Collector-Base Breakdown Voltage (IC = 10µA, IE = 0) V(BR)CBO 50 - - Vdc Collector-Emitter Breakdown Voltage (Note 4.) (IC = 2.0 mA, I = 0) V(BR)CEO 50 - - Vdc 3. New devices. Updated curves to follow in subsequent data sheets. 4. Pulse Test: Pulse Width < 300µs, Duty Cycle < 2.0% Package R1 (K) R2 (K) ShippingDevice ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) Characteristic Symbol OFF CHARACTERISTICS Collector-Base Cutoff Current (VCB = 50 V, IE = 0) 2007. 12. 18 2/7 DTA201 ~ DTA214 / DTA217 / DTA223 Revision No : 0 DTA202T1G DTA202T3G A6A 10 10 3000/T ape & Reel 10,000/T ape & ReelSOT-23 DTA203T1G DTA203T3G A6B 22 22 3000/T ape & Reel 10,000/T ape & ReelSOT-23 DTA204T1G DTA204T3G A6C 47 47 3000/T ape & Reel 10,000/T ape & ReelSOT-23 DTA206T1G DTA206T3G A6K 4.7 47 3000/T ape & Reel 10,000/T ape & ReelSOT-23 DTA210T1G (Note 3.) DTA210T3G A6F 4.7 ∞ 3000/T ape & Reel 10,000/T ape & ReelSOT-23 DTA211T1G (Note 3.) DTA211T3G A6E 10 ∞ 3000/T ape & Reel 10,000/T ape & ReelSOT-23 DTA214T1G (Note 3.) DTA214T3G A6O 47 ∞ 3000/T ape & Reel 10,000/T ape & ReelSOT-23 DTA217T1G (Note 3.) DTA217T3G A6H 2.2 2.2 3000/T ape & Reel 10,000/T ape & ReelSOT-23 DTA223T1G (Note 3.) DTA223T3G A6G 1.0 1.0 3000/T ape & Reel 10,000/T ape & ReelSOT-23 DTA201T1G DTA201T3G SOT-23 3000/T ape & Reel 10,000/T ape & ReelA6J 4.7 4.7 DTA207T1G (Note 3.) DTA207T3G A6D 10 3000/T ape & Reel 10,000/T ape & ReelSOT-23 47 DTA208T1G (Note 3.) DTA208T3G A6L 22 3000/T ape & Reel 10,000/T ape & ReelSOT-23 47 Marking DTA202 DTA203 DTA204 DTA206 DTA210 DTA211 DTA214 DTA217 DTA223 DTA201 DTA207 DTA208 Min UnitTyp Max

ELECTRICAL CHARACTERISTICS

(VCE= 10 V, IC = 5.0 mA) hFE Collector-Emitter Saturation Voltage (IC = 10 mA, IB = 0.3 mA) - - 0.25 Vdc Output Voltage (on) (VCC = 5.0 V, V B =2.5 V, RL = 1.0 kΩ) VOL 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 Vdc Output Voltage (off) V OH 4.9 Vdc Input Resistor R1 7.0 10 13 15.4 22 28.6 32.9 47 61.1 32.9 47 61.1 7.0 10 13 7.0 10 13 3.3 4.7 6.1 0.7 1.0 1.3 1.5 2.2 2.9 3.3 4.7 6.1 3.3 4.7 6.1 15.4 22 28.6 kΩ DTA202 / DTA203 / DTA204 DTA207 DTA210 / DTA211 / DTA214 DTA201 / DTA217 / DTA223 DTA206 R1/R2 0.8 0.17 1.0 0.21 1.2 0.25 0.8 1.0 1.2 0.055 0.1 0.185 5. Pulse Test: Pulse Width < 300µs, Duty Cycle < 2.0% ON CHARACTERISTICS (Note 5.) 0.2 80 140 – 35 60 – 60 100 – 80 140 – 80 140 – 160 250 – 160 250 – 3.0 5.0 – 8.0 15 – 15 27 – 80 140 – 80 130 – - - - - 2007. 12. 18 3/7 DTA201 ~ DTA214 / DTA217 / DTA223 Revision No : 0 Min UnitTyp Max DTA202 DTA203 DTA204 DTA206 DTA210 DTA211 DTA214 DTA217 DTA223 DTA201 DTA207 DTA208 DTA201 / DTA206 / DTA217 / DTA223 DTA208 / DTA210 / DTA211 DTA202 DTA203 DTA204 DTA206 DTA210 DTA211 DTA214 DTA217 DTA223 DTA201 DTA207 DTA208 DTA210 DTA211 DTA217 DTA223 DTA201 DTA202 DTA203 DTA204 DTA206 DTA210 DTA211 DTA214 DTA217 DTA223 DTA201 DTA207 DTA208 Resistor Ratio C = 10 mA, IB = 5 mA) (IC = 10 mA, IB = 1 mA) (VCC = 5.0 V, V B =3.5 V, RL = 1.0 kΩ) (VCC = 5.0 V, V B =0.5 V, RL = 1.0 kΩ) (VCC = 5.0 V, V B =0.25 V, RL = 1.0 kΩ) (VCC = 5.0 V, V B =0.050 V, RL = 1.0 kΩ)

L A C B S H GV 1 2 mm inches 0 037 0 95 0 037 0 95 0 079 2 0 0 035 0 9 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. PIN 1 BASE

2 E MITTER

3 COLLECTOR

  1. 12. 18 7/7Revision No : 0 INCHES MILLIMETERSDIM A B C D G H J K L S V MIN 0.1102 0.0472 0.0350 0.0150 0.0701 0.0005 0.0034 0.0140 0.0350 0.0830 0.0177 MAX 0.1197 0.0551 0.0440 0.0200 0.0807 0.0040 0.0070 0.0285 0.0401 0.1039 0.0236 MIN 2.80 1.20 0.89 0.37 1.78 0.013 0.085 0.35 0.89 2.10 0.45 MAX 3.04 1.40 1.11 0.50 2.04 0.100 0.177 0.69 1.02 2.64 0.60 DTA201 ~ DTA214 / DTA217 / DTA223