DTA113T UTC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
UNISONIC TECHNOLOGIES CO., LTD DTA113T PNP SILICON TRANSISTOR www.unisonic.com.tw 1 of 3 Copyright © 2011 Unisonic Technologies Co., Ltd QW-R206-091.C PNP DIGITAL TRANSISTOR (BUILT- IN BIAS RESISTORS) FEATURES * Built-in bias resistors that implies easy ON/OFF applications. * The bias resistors are thin-film resistors with complete isolation to allow positive input. EQUIVALENT CIRCUIT ORDERING INFORMATION Ordering Number Package Pin Assignment Packing Lead Free Halogen Free 1 2 3 DTA113TL-AE3-R DTA113TG-AE3-R SOT-23 E B C Tape Reel MARKING
DTA113T PNP SILICON TRANSISTOR UNISONIC TECHNOLOGIES CO., LTD 2 of 3 www.unisonic.com.tw Q W - R 2 0 6 - 0 9 1 . C ABSOLUTE MAXIMUM RATINGS (TA=25°C) PARAMETER SYMBOL RATINGS UNIT Collector-Base Voltage V CBO -50 V Collector-Emitter Voltage V CEO -50 V Emitter-Base Voltage V EBO -6 V Collector Current I C -100 mA Peak Collector Current I CM -200 mA Collector Power Dissipation P C 150 mW Junction Temperature T J 150 °C Storage Temperature T STG -55~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL CHARACTERISTICS (TA=25°C, unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT Collector-Emitter Breakdown Voltage BV CEO I C=-100μA, RBE=∞ -50 V Collector-Emitter Saturation Voltage V CE(SAT) IC=-10mA, IB=-0.5mA -0.3 V Collector Cut-off Current I CBO V CB=-50V, IE=0 -0.1 μA DC Current Gain h FE V CE=-5V, IC=-1mA 100 Input Resistance R IN 0.7 1.0 1.3 k Ω Current Gain Bandwidth Product f T V CE=-6V, IE=10mA 150 MHz
DTA113T PNP SILICON TRANSISTOR UNISONIC TECHNOLOGIES CO., LTD 3 of 3 www.unisonic.com.tw Q W - R 2 0 6 - 0 9 1 . C TYPICAL CHARACTERISTICS UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.