DSS-327 MA-COM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- Fully Hermetic Package
- Low Loss: 0.3 dB Typical
- Amplitude Balance: 0.05 dB Typical
- Impedance: 50 Ohms Nominal
- Maximum Power Rating or Input Power: 1 Watt Max.
- Internal Load Dissipation: 0.05 Watts Max.
- MIL-STD-202 Screening Available
Description
A Power Divider is ideally a lossless reciprocal device which can also perform vector summation of two or more signals and thus is sometimes called a power combiner or summer. SF-1 Pin Configuration Electrical Specifications1: TA = -55°C to +85°C Pin No. Function Pin No. Function 1 Σ 3 GND
2 Output C 4 Output D
Parameter Test Conditions Frequency Units Min Typ Max Insertion Loss Less Coupling 5 - 500 MHz 500 - 1000 MHz dB dB 0.5 1.0 Isolation — 5 - 500 MHz 500 - 1000 MHz dB dB Amplitude Balance — 5 - 1000 MHz dB — — 0.3 Phase Balance — 5 - 500 MHz 500 - 1000 MHz VSWR All Ports 10 - 500 MHz 5 - 1000 MHz Ratio Ratio 1.4:1 1.6:1 1. All specifications apply with 50 ohm source and load impedance. This product contains elements protected by United States Patent Number 3,428,920.
Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Surface Mount Two-Way Power Divider, 5 - 1000 MHz Rev. V4 DSS-327 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Typical Performance Curves