DSS-313 MA-COM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
- Fully Hermetic Package
- Loss: 0.6 dB Typical Midband
- Isolation: 28 dB Typical Midband
- VSWR: 1.2:1 Typical Midband
- Impedance: 50 Ohms Nominal
- Maximum Power Rating or Input Power: 250 mW Max.
- Internal Load Dissipation: 50 mW Max.
- MIL-STD-202 Screening Available
Description
A Power Divider is ideally a lossless reciprocal device which can also perform vector summation of two or more signals and thus is sometimes called a power combiner or summer. FP-2 (DS-313) SF-1 (DSS-313) Pin Configuration (DSS-313) Pin No. Function Pin No. Function 1 Σ 3 GND
2 Output C 4 Output D
Pin Configuration (DS-313) Pin No. Function Pin No. Function 1 Σ 5 GND
2 GND 6 GND
3 GND 7 GND
4 Output C 8 Output D
Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Two-Way Power Divider, 10 - 2000 MHz Rev. V3 DS- / DSS-313 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Parameter Test Conditions Frequency Units Min Typ Max Insertion Loss Less Coupling 20 - 1000 MHz 10 - 1500 MHz 1500 - 2000 MHz dB dB dB 1.1 1.3 1.8 Isolation — 20 - 1000 MHz 10 - 1500 MHz 1500 - 2000 MHz dB dB dB Amplitude Balance — 20 - 1000 MHz 10 - 1500 MHz 1500 - 2000 MHz dB dB dB 0.3 0.4 0.6 Phase Balance — 20 - 1000 MHz 10 - 1500 MHz 1500 - 2000 MHz VSWR All Ports 20 - 1000 MHz 10 - 1500 MHz 1500 - 2000 MHz Ratio Ratio Ratio 1.5:1 1.6:1 1.8:1 1. All specifications apply with 50 ohm source and load impedance. Parameter Test Conditions Frequency Units Min Typ Max Insertion Loss Less Coupling 20 - 1000 MHz 10 - 1500 MHz 1500 - 2000 MHz dB dB dB 1.1 1.3 1.8 Isolation — 20 - 1000 MHz 10 - 1500 MHz 1500 - 2000 MHz dB dB dB Amplitude Balance — 20 - 1000 MHz 10 - 1500 MHz 1500 - 2000 MHz dB dB dB 0.3 0.4 0.6 Phase Balance — 20 - 1000 MHz 10 - 1500 MHz 1500 - 2000 MHz VSWR All Ports 20 - 1000 MHz 10 - 1500 MHz 1500 - 2000 MHz Ratio Ratio Ratio 1.5:1 1.6:1 1.8:1
Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Two-Way Power Divider, 10 - 2000 MHz Rev. V3 DS- / DSS-313 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Typical Performance Curves
Ordering Information
Isolation - Ports C-D Insertion Loss - Ports Σ-C, Σ−D VSWR 0.000 0.200 0.400 0.600 0.800 1 .000 1 .200 Frequency (GHz) Insertion Loss (dB) Frequency (GHz) Isolation (dB) 1. 2 1. 4 1. 6 1. 8 Frequency (GHz) VSWR E Port C, D Ports Part Number Package DS-313 PIN FP-2 DSS-313 PIN SF-1