DSS-113 MA-COM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
- Fully Hermetic Package (DSS-113)
- Three Decade Bandwidth
- Low Loss: 0.25 dB Typical
- Impedance: 50 Ohms Nominal
- Maximum Power Rating or Input Power: 1W Max.
- Internal Load Dissipation: 0.05 W Max.
- MIL-STD-202 Screening Available
Description
A Power Divider is ideally a lossless reciprocal device which can also perform vector summation of two or more signals and thus is sometimes called a power combiner or summer. FP-2 (DS-113) SF-1 (DSS-113) Pin Configuration (DS-113) Pin No. Function Pin No. Function 1 Σ 5 GND
2 GND 6 GND
3 GND 7 GND
4 Output C 8 Output D
Pin Configuration (DSS-113) Pin No. Function Pin No. Function 1 Σ 3 GND
2 Output C 4 Output D
Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Two-Way Power Divider,
400 KHz - 400 MHz
Rev. V3 DS- / DSS-113 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Parameter Test Conditions Frequency Units Min Typ Max Insertion Loss Less Coupling 0.4 - 400 MHz dB 0.75 Isolation 0.4 - 400 MHz dB Amplitude Balance 0.4 - 400 MHz dB 0.15 Phase Balance 0.4 - 400 MHz 1.0 VSWR All Ports 0.4 - 400 MHz Ratio — — 1.5:1 1. All specifications apply with 50 ohm source and load impedance. Parameter Test Conditions Frequency Units Min Typ Max Insertion Loss Less Coupling 0.4 - 400 MHz dB 0.75 Isolation 0.4 - 400 MHz dB Amplitude Balance 0.4 - 400 MHz dB 0.15 Phase Balance 0.4 - 400 MHz 1.5 VSWR All Ports 0.4 - 400 MHz Ratio 1.6:1
Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Two-Way Power Divider, Rev. V3 DS- / DSS-113 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Typical Performance Curves